{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BMI0703T11F","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BMI0703T11F","canonicalUrl":"https://aoctrl.com/schneider/BMI0703T11F","factsUrl":"https://aoctrl.com/api/mcp/products/BMI0703T11F","rawCanonicalId":null},"summary":{"shortDescription":"Bosch Rexroth IndraDyn BMI series, BMI0703T11F servo motor, single-phase 100-240 V, 700 W at 230 V, with Hiperface absolute single-turn feedback, holding brake, integrated EMC filter, keyed shaft 14 mm, 70 mm flange.","salesMarkdown":"The BMI0703T11F: Mechanical fit: the flange is 70 mm square, shaft is 14 mm diameter with a keyed end (key width 5 mm, shaft extension 30 mm). The housing is IP65, shaft seal IP54. Cooling is natural convection, so no external fan is needed. ## Torque and power: voltage-dependent curves This is a single-phase servo that delivers two different power ratings depending on line voltage. At 115 V single-phase, nominal output is 400 W with 2.2 Nm nominal torque and peak stall torque of 8.6 Nm. At 230 V single-phase, output rises to 700 W with 2.9 Nm nominal torque, same peak stall torque of 8.6 Nm. The continuous stall torque is 3.4 Nm across the full voltage range. If your installation runs on 115 V, be aware that the nominal torque and power are lower than the 230 V rating. ## Feedback and brake interface Feedback is absolute single-turn SinCos Hiperface. Holding brake provides 3 Nm torque and 5 W pull-in power; electrical connection is via PCB connector.","metaTitle":"Bosch Rexroth BMI0703T11F 700W Servo, Hiperface, Brake","metaDescription":"Active production single-phase servo motor with 3 Nm holding brake, absolute single-turn Hiperface feedback, integrated EMC filter. Quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":[],"specifications":{"Phase":"Single phase","Length":"13.3 in (339 mm)","Category":"US1PC5618287","Key width":"0.2 in (5 mm)","Shaft end":"Keyed","EMC filter":"Integrated","Second shaft":"Without second shaft end","Shaft length":"1.2 in (30 mm)","Feedback type":"Absolute single turn SinCos Hiperface","Holding brake":"With","Nominal speed":"3200 rpm 230 V single phase 1400 rpm 115 V single phase","Rotor inertia":"1.78 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m) holding brake","Nominal torque":"25.7 lbf.in (2.9 N.m) 115 V single phase 19.5 lbf.in (2.2 N.m) 230 V single phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"0.81 N.m/A 68 °F (20 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Supply frequency":"50/60 Hz - 5...5 %","Back emf constant":"54.44 V/krpm 68 °F (20 °C)","Device short name":"BMI","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"76.1 lbf.in (8.6 N.m) 115 V single phase 76.1 lbf.in (8.6 N.m) 230 V single phase","Stator inductance":"2.28 mH 68 °F (20 °C)","Stator resistance":"2.58 Ohm 68 °F (20 °C)","Brake pull-in power":"5 W","Maximum current Irms":"17.8 A 115 V, single phase 17.8 A 230 V, single phase","Nominal output power":"700 W 230 V single phase 400 W 115 V single phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Printed circuit board connector","Nbr. of units in pkg.":"1","Number of motor poles":"10","Supply voltage limits":"100...240 V","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"3","Output current 3s peak":"10.5 A 230 V 3 s","Continuous stall torque":"30.09 lbf.in (3.4 N.m) 115...230 V single phase","IP Degree of Protection":"Shaft IP54 Housing IP65","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"3.5 A","Maximum mechanical speed":"8000 rpm","Network frequency limits":"47.5...63 Hz","Number of mounting holes":"4","Continuous output current":"3.5 A 8 kHz","Product or Component Type":"Servo motor with power stage","Speed feedback resolution":"131072 points/turn","[Us] rated supply voltage":"115...230 V - 15...10 %","Distance shaft shoulder-flange":"0.10 in (2.5 mm)","Stator electrical time constant":"0.88 ms 68 °F (20 °C)","Circle diameter of the mounting holes":"3.0...3.2 in (75...82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/9efcceaf6d143f285da04a1bba031a88.pdf","sourceUrl":"https://www.se.com/us/en/product/BMI0703T11F/servo-motor-bmi-1phase-keyed-ip54-single-turn-131072-p-t-brake/","alternativesUrl":"https://aoctrl.com/api/mcp/products/BMI0703T11F/alternatives.json"},"ai":{"faq":[{"question":"What feedback type does the motor use?","answer":"It uses an absolute single-turn SinCos Hiperface encoder."},{"question":"What are the continuous and peak torque ratings?","answer":"Continuous stall torque is 3.4 Nm across the voltage range. Peak stall torque is 8.6 Nm for both 115 V and 230 V single-phase."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BMI0703T11F","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BMI0703T11F when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}