{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BMI0703T22F","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BMI0703T22F","canonicalUrl":"https://aoctrl.com/schneider/BMI0703T22F","factsUrl":"https://aoctrl.com/api/mcp/products/BMI0703T22F","rawCanonicalId":null},"summary":{"shortDescription":"Bosch Rexroth BMI0703T22F, single-phase servo motor, 700 W (230 V) or 400 W (115 V), absolute multiturn SinCos Hiperface feedback, holding brake, IP65.","salesMarkdown":"The BMI0703T22F: Single-phase servo motor running 100–240 VAC, 50/60 Hz. Delivers 700 W at 230 V or 400 W at 115 V nominal output. Integrated EMC filter keeps line-side emissions within class without an external choke. Absolute multiturn SinCos Hiperface feedback means no homing run after power cycle — position is known immediately. Holding brake rated 3 Nm holds the load in a power-off condition, eliminating a separate brake controller. IP65 housing and natural convection cooling suit washdown and dusty environments. Standard 70 mm flange, 14 mm shaft with an untapped end. Shaft length 30 mm; integral centring collar depth 2.5 mm. PCB connector for power and feedback signals — no flying leads to manage. Feedback resolution is absolute multiturn, not incremental. If you're replacing an older incremental-encoder motor, check the drive compatibility — Hiperface requires a matching interface. The integrated holding brake draws 5 W pull-in power; no extra relay needed if the drive has a brake control output.","metaTitle":"BMI0703T22F Servo Motor, 700W Single-Phase, IP65, Hiperface","metaDescription":"BMI0703T22F single-phase servo motor, 700W at 230V, 3 Nm holding brake, absolute SinCos Hiperface feedback, IP65. Active current production. Sourced to order via RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":[],"specifications":{"Phase":"Single phase","Length":"13.3 in (339 mm)","Category":"US1PC5618287","Shaft end":"Untapped","EMC filter":"Integrated","Second shaft":"Without second shaft end","Shaft length":"1.2 in (30 mm)","Feedback type":"Absolute multiturn SinCos Hiperface","Holding brake":"With","Nominal speed":"3200 rpm 230 V single phase 1400 rpm 115 V single phase","Rotor inertia":"1.78 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m) holding brake","Nominal torque":"25.7 lbf.in (2.9 N.m) 115 V single phase 19.5 lbf.in (2.2 N.m) 230 V single phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"0.81 N.m/A 68 °F (20 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Supply frequency":"50/60 Hz - 5...5 %","Back emf constant":"54.44 V/krpm 68 °F (20 °C)","Device short name":"BMI","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"76.1 lbf.in (8.6 N.m) 115 V single phase 76.1 lbf.in (8.6 N.m) 230 V single phase","Stator inductance":"2.28 mH 68 °F (20 °C)","Stator resistance":"2.58 Ohm 68 °F (20 °C)","Brake pull-in power":"5 W","Maximum current Irms":"17.8 A 115 V, single phase 17.8 A 230 V, single phase","Nominal output power":"700 W 230 V single phase 400 W 115 V single phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Printed circuit board connector","Nbr. of units in pkg.":"1","Number of motor poles":"10","Supply voltage limits":"100...240 V","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"3","Output current 3s peak":"10.5 A 230 V 3 s","Continuous stall torque":"30.09 lbf.in (3.4 N.m) 115...230 V single phase","IP Degree of Protection":"IP65","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"3.5 A","Maximum mechanical speed":"8000 rpm","Network frequency limits":"47.5...63 Hz","Number of mounting holes":"4","Continuous output current":"3.5 A 8 kHz","Product or Component Type":"Servo motor with power stage","Speed feedback resolution":"131072 points/turn x 4096 turns","[Us] rated supply voltage":"115...230 V - 15...10 %","Distance shaft shoulder-flange":"0.10 in (2.5 mm)","Stator electrical time constant":"0.88 ms 68 °F (20 °C)","Circle diameter of the mounting holes":"3.0...3.2 in (75...82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,325.00 – $2,765.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/3ef5ce39c60629570259145cf22570e6.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/BMI0703T22F/alternatives.json"},"ai":{"faq":[{"question":"What is the shaft length and diameter of the BMI0703T22F?","answer":"Shaft diameter is 14 mm, shaft length is 30 mm. The shaft end is untapped."},{"question":"Does the BMI0703T22F include a holding brake?","answer":"Yes, it has an integrated holding brake with holding torque of 3 Nm and pull-in power of 5 W."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BMI0703T22F","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BMI0703T22F when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}