{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BMI0703T36F","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BMI0703T36F","canonicalUrl":"https://aoctrl.com/schneider/BMI0703T36F","factsUrl":"https://aoctrl.com/api/mcp/products/BMI0703T36F","rawCanonicalId":null},"summary":{"shortDescription":"Bosch Rexroth BMI series, servo motor, order code BMI0703T36F, single-phase 230/115 V, 700/400 W, IP65, holding brake, Hiperface absolute single-turn feedback.","salesMarkdown":"## Integrator brief: what this BMI motor carries The BMI0703T36F is a single-phase-fed servo motor from the Rexroth BMI series, rated for 700 W at 230 V single phase or 400 W at 115 V single phase. Feedback is absolute single-turn SinCos Hiperface, which pins it to drives that support that protocol — Rexroth IndraDrive or third-party drives with Hiperface input. Holding brake included, rated 3 N·m static torque. Shaft is 14 mm diameter, keyed, 30 mm long — standard 70 mm flange, IP65 sealed. Integrated EMC filter saves external filtering in the cabinet. Natural convection cooling; no forced air requirement. Nominal torque 2.9 N·m at 115 V, 2.2 N·m at 230 V — so actual load capacity depends on your supply voltage. Peak stall torque 8.6 N·m on both voltages, giving a 3–4× overload margin for accelerations. Continuous stall torque 3.4 N·m across the full voltage range, which is the steady-state limit for sizing without duty cycle factoring. Maximum current Irms 17.8 A on both supply voltages. Stator resistance 2.58 Ω, inductance 2.28 mH at 20 °C, and brake pull-in power 5 W define drive parameters.","metaTitle":"Bosch Rexroth BMI0703T36F Servo Motor, Single-Phase 700W, IP","metaDescription":"BMI0703T36F servo motor, current production, single-phase 230/115V, 700W/400W, IP65, holding brake, Hiperface feedback. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Phase":"Single phase","Length":"13.3 in (339 mm)","Category":"US1PC5618287","Key width":"0.2 in (5 mm)","Shaft end":"Keyed","EMC filter":"Integrated","Second shaft":"Without second shaft end","Shaft length":"1.2 in (30 mm)","Feedback type":"Absolute single turn SinCos Hiperface","Holding brake":"With","Nominal speed":"3200 rpm 230 V single phase 1400 rpm 115 V single phase","Rotor inertia":"1.78 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m) holding brake","Nominal torque":"25.7 lbf.in (2.9 N.m) 115 V single phase 19.5 lbf.in (2.2 N.m) 230 V single phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"0.81 N.m/A 68 °F (20 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Supply frequency":"50/60 Hz - 5...5 %","Back emf constant":"54.44 V/krpm 68 °F (20 °C)","Device short name":"BMI","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"76.1 lbf.in (8.6 N.m) 115 V single phase 76.1 lbf.in (8.6 N.m) 230 V single phase","Stator inductance":"2.28 mH 68 °F (20 °C)","Stator resistance":"2.58 Ohm 68 °F (20 °C)","Brake pull-in power":"5 W","Maximum current Irms":"17.8 A 115 V, single phase 17.8 A 230 V, single phase","Nominal output power":"700 W 230 V single phase 400 W 115 V single phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Printed circuit board connector","Nbr. of units in pkg.":"1","Number of motor poles":"10","Supply voltage limits":"100...240 V","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"3","Output current 3s peak":"10.5 A 230 V 3 s","Continuous stall torque":"30.09 lbf.in (3.4 N.m) 115...230 V single phase","IP Degree of Protection":"IP65","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"3.5 A","Maximum mechanical speed":"8000 rpm","Network frequency limits":"47.5...63 Hz","Number of mounting holes":"4","Continuous output current":"3.5 A 8 kHz","Product or Component Type":"Servo motor with power stage","Speed feedback resolution":"32768 points/turn","[Us] rated supply voltage":"115...230 V - 15...10 %","Distance shaft shoulder-flange":"0.10 in (2.5 mm)","Stator electrical time constant":"0.88 ms 68 °F (20 °C)","Circle diameter of the mounting holes":"3.0...3.2 in (75...82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2,285.00 – $4,278.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/3ef5ce39c60629570259145cf22570e6.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/BMI0703T36F/alternatives.json"},"ai":{"faq":[{"question":"What phase voltage does this motor accept?","answer":"Single-phase supply, rated 100…240 V, 50/60 Hz. Output power and torque differ between 115 V and 230 V inputs."},{"question":"What is the overall length of this motor?","answer":"Length is 13.3 in (339 mm), which includes the shaft extension and the connector housing."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BMI0703T36F","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BMI0703T36F when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}