{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BMI1002P26F","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BMI1002P26F","canonicalUrl":"https://aoctrl.com/schneider/BMI1002P26F","factsUrl":"https://aoctrl.com/api/mcp/products/BMI1002P26F","rawCanonicalId":null},"summary":{"shortDescription":"BMI series servo motor, 100 mm flange, three-phase 208–480 V supply, rated 5.1 Nm continuous stall torque, IP65 enclosure, with holding brake and absolute single-turn SinCos Hiperface feedback.","salesMarkdown":"## Integrator's motor note BMI1002P26F is a BMI-series servo motor with a 100 mm International standard flange, rated for 208–480 V three-phase supply. It delivers 5.1 Nm continuous stall torque at 400 V, with a peak stall torque of 14 Nm across all supply voltages. The motor includes an integrated holding brake rated at 5.5 Nm holding torque and an absolute single-turn SinCos Hiperface encoder for position feedback without a homing cycle. Cooling is by natural convection. The IP65 rating allows installation in washdown or dusty environments without additional enclosure. ## Mounting & installation Mount using the 100 mm flange with four 9 mm through-holes and a centring collar depth of 3.5 mm. The shaft is 19 mm diameter, 40 mm long, untapped, with no second shaft end. Electrical connection is via PCB connectors. The integrated EMC filter reduces conducted emissions on the supply lines. Rated radial force at the shaft is 990 N at 1000 rpm, derating to 580 N at 5000 rpm. Maximum permissible axial force is 20% of the radial load. Natural convection cooling limits duty; forced-air or liquid cooling is not fitted.","metaTitle":"BMI1002P26F 100mm Servo Motor, 5.1 Nm, IP65, Holding Brake","metaDescription":"BMI1002P26F BMI series servo motor, three-phase 208–480 V, IP65, absolute SinCos Hiperface encoder, holding brake. Current production; source to RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":[],"specifications":{"Phase":"Three phase","Length":"11.1 in (282 mm)","Category":"US1PC5618287","Shaft end":"Untapped","EMC filter":"Integrated","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Feedback type":"Absolute single turn SinCos Hiperface","Holding brake":"With","Nominal speed":"1900 rpm 208 V three phase 3800 rpm 400 V three phase 4700 rpm 480 V three phase","Rotor inertia":"6.77 kg.cm²","Holding torque":"48.7 lbf.in (5.5 N.m) holding brake","Nominal torque":"45.1 lbf.in (5.1 N.m) 400 V three phase 47.8 lbf.in (5.4 N.m) 208 V three phase 36.3 lbf.in (4.1 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.28 N.m/A 68 °F (20 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Supply frequency":"50/60 Hz - 5...5 %","Back emf constant":"84.52 V/krpm 68 °F (20 °C)","Device short name":"BMI","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"123.9 lbf.in (14 N.m) 208 V three phase 123.9 lbf.in (14 N.m) 400 V three phase 123.9 lbf.in (14 N.m) 480 V three phase","Stator inductance":"9.79 mH 68 °F (20 °C)","Stator resistance":"2.347 Ohm 68 °F (20 °C)","Brake pull-in power":"8 W","Maximum current Irms":"17.5 A 208 V, three phase 17.5 A 400 V, three phase 17.5 A 480 V, three phase","Nominal output power":"1000 W 208 V three phase 1900 W 400 V three phase 1900 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Printed circuit board connector","Nbr. of units in pkg.":"1","Number of motor poles":"10","Supply voltage limits":"208...480 V","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"2","Output current 3s peak":"12 A 400 V 3 s","Continuous stall torque":"53.1 lbf.in (6 N.m) 208...480 V three phase","IP Degree of Protection":"IP65","Maximum radial force Fr":"990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm 580 N 5000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"4 A","Maximum mechanical speed":"6000 rpm","Network frequency limits":"47.5...63 Hz","Number of mounting holes":"4","Continuous output current":"4 A 8 kHz","Product or Component Type":"Servo motor with power stage","Speed feedback resolution":"32768 points/turn","[Us] rated supply voltage":"208...480 V - 15...10 %","Distance shaft shoulder-flange":"0.1 in (3.5 mm)","Stator electrical time constant":"4.17 ms 68 °F (20 °C)","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$3,260.00 – $4,400.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/c4a8ceeedfcc9d6a2f3b004157b1e3f7.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/BMI1002P26F/alternatives.json"},"ai":{"faq":[{"question":"What is the supply voltage and phase configuration?","answer":"The BMI1002P26F is a three-phase motor rated for 208–480 V AC, 50/60 Hz supply."},{"question":"What is the motor's enclosure rating and feedback type?","answer":"IP65 enclosure; feedback is an absolute single-turn SinCos Hiperface encoder, providing position on power-up without homing."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BMI1002P26F","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BMI1002P26F when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}