{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BMI1002P32F","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BMI1002P32F","canonicalUrl":"https://aoctrl.com/schneider/BMI1002P32F","factsUrl":"https://aoctrl.com/api/mcp/products/BMI1002P32F","rawCanonicalId":null},"summary":{"shortDescription":"Schneider BMI1002P32F Motors — now discontinued. Supplied from remaining channel stock; full specifications, lifecycle and same-series options are below.","salesMarkdown":"## Overview Rated output is 1000 W at 4 A, torque 6 Nm at 6000 rpm, with natural convection cooling. Versus the BMI1002P31F, the BMI1002P32F uses an absolute multiturn SinCos Hiperface encoder (131072 points/turn x 4096 turns) instead of single-turn feedback — select the multiturn version when the application requires absolute position tracking over multiple shaft revolutions. Compared to the BMI1002P32A (without holding brake), the BMI1002P32F includes a holding brake and has a higher rotor inertia (6.77 kg·cm² vs 6.28 kg·cm²) — choose the braked version for vertical-axis loads where power-off holding is required. ## Lifecycle","metaTitle":"Schneider BMI1002P32F Servo Motor, 10-Pole, 480V, IP65, Multiturn Encoder","metaDescription":"Schneider BMI1002P32F servo motor: 10-pole, 3-phase, 480 V, IP65, keyed shaft, holding brake, absolute multiturn SinCos Hiperface encoder, 131072 p/t x 4096 turns, 4 A, 1000 W, 6 N","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Phase":"Three phase","Length":"11.1 in (282 mm)","Category":"US1PC5618287","Key width":"0.2 in (6 mm)","Shaft end":"Keyed","EMC filter":"Integrated","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Feedback type":"Absolute multiturn SinCos Hiperface","Holding brake":"With","Nominal speed":"1900 rpm 208 V three phase 3800 rpm 400 V three phase 4700 rpm 480 V three phase","Rotor inertia":"6.77 kg.cm²","Holding torque":"48.7 lbf.in (5.5 N.m) holding brake","Nominal torque":"45.1 lbf.in (5.1 N.m) 400 V three phase 47.8 lbf.in (5.4 N.m) 208 V three phase 36.3 lbf.in (4.1 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.28 N.m/A 68 °F (20 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Supply frequency":"50/60 Hz - 5...5 %","Back emf constant":"84.52 V/krpm 68 °F (20 °C)","Device short name":"BMI","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"123.9 lbf.in (14 N.m) 208 V three phase 123.9 lbf.in (14 N.m) 400 V three phase 123.9 lbf.in (14 N.m) 480 V three phase","Stator inductance":"9.79 mH 68 °F (20 °C)","Stator resistance":"2.347 Ohm 68 °F (20 °C)","Brake pull-in power":"8 W","Maximum current Irms":"17.5 A 208 V, three phase 17.5 A 400 V, three phase 17.5 A 480 V, three phase","Nominal output power":"1000 W 208 V three phase 1900 W 400 V three phase 1900 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Printed circuit board connector","Nbr. of units in pkg.":"1","Number of motor poles":"10","Supply voltage limits":"208...480 V","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"2","Output current 3s peak":"12 A 400 V 3 s","Continuous stall torque":"53.1 lbf.in (6 N.m) 208...480 V three phase","IP Degree of Protection":"IP65","Maximum radial force Fr":"990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm 580 N 5000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"4 A","Maximum mechanical speed":"6000 rpm","Network frequency limits":"47.5...63 Hz","Number of mounting holes":"4","Continuous output current":"4 A 8 kHz","Product or Component Type":"Servo motor with power stage","Speed feedback resolution":"131072 points/turn x 4096 turns","[Us] rated supply voltage":"208...480 V - 15...10 %","Distance shaft shoulder-flange":"0.1 in (3.5 mm)","Stator electrical time constant":"4.17 ms 68 °F (20 °C)","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$3,805.00 – $4,951.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/c4a8ceeedfcc9d6a2f3b004157b1e3f7.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/BMI1002P32F/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BMI1002P32F","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BMI1002P32F when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}