{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BMI1002T26A","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BMI1002T26A","canonicalUrl":"https://aoctrl.com/schneider/BMI1002T26A","factsUrl":"https://aoctrl.com/api/mcp/products/BMI1002T26A","rawCanonicalId":null},"summary":{"shortDescription":"BMI series servo motor, BMI1002T26A, 100 mm flange, single-phase, IP65, absolute Hiperface encoder, integrated EMC filter.","salesMarkdown":"## Motor selection and voltage trade-offs BMI1002T26A is a 10-pole, 2-stack single-phase servo motor rated for 100...240 V AC supply. At 115 V it delivers 750 W nominal output at 1400 rpm with 5.4 Nm torque; at 230 V it jumps to 1300 W at 3000 rpm but torque drops to 4.4 Nm. That 18% torque reduction at high voltage means this motor is not a constant-torque device across the voltage range—select your supply voltage first, then size the load against the 5.4 Nm / 4.4 Nm curve. Feedback is absolute single-turn SinCos Hiperface, so it pairs only with drives that decode that protocol—no HTL, EnDat, or BiSS option here. Expect to match it with a BM line servo drive or a third-party unit supporting Hiperface. Peak stall torque holds at 14.5 Nm regardless of supply voltage, useful for short overloads. Continuous stall torque is 6 Nm, limited by thermal capacity of the natural-convection cooling. Flange size is 100 mm (3.9 in) per IEC standard, centring collar 95 mm diameter, depth 3.5 mm. Four mounting holes at 9 mm diameter. Shaft: 19 mm diameter, 40 mm length, untapped, no second shaft end. Allow clearance for the printed-circuit-board connector on the rear. IP65 rating means the motor can handle hose-down if the mating connector is also IP65. Integrated EMC filter on the power leads simplifies panel layout—no external filter needed for typical installations, but check drive cable length limits in your installation manual; some drives require an additional output choke beyond a certain run.","metaTitle":"BMI1002T26A Servo Motor, 100mm Flange, IP65, Hiperface","metaDescription":"BMI1002T26A single-phase servo motor with absolute single-turn Hiperface encoder, IP65, 5.4 Nm nominal torque at 115V/1400 rpm. In current production.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Phase":"Single phase","Length":"10.7 in (273 mm)","Category":"US1PC5618287","Shaft end":"Untapped","EMC filter":"Integrated","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Feedback type":"Absolute single turn SinCos Hiperface","Holding brake":"Without","Nominal speed":"1400 rpm 115 V single phase 3000 rpm 230 V single phase","Rotor inertia":"6.28 kg.cm²","Nominal torque":"47.8 lbf.in (5.4 N.m) 115 V single phase 38.9 lbf.in (4.4 N.m) 230 V single phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"0.89 N.m/A 68 °F (20 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Supply frequency":"50/60 Hz - 5...5 %","Back emf constant":"58.5 V/krpm 68 °F (20 °C)","Device short name":"BMI","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"128.3 lbf.in (14.5 N.m) 115 V single phase 128.3 lbf.in (14.5 N.m) 230 V single phase","Stator inductance":"4.7 mH 68 °F (20 °C)","Stator resistance":"1.08 Ohm 68 °F (20 °C)","Maximum current Irms":"30 A 115 V, single phase 30 A 230 V, single phase","Nominal output power":"750 W 115 V single phase 1300 W 230 V single phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Printed circuit board connector","Nbr. of units in pkg.":"1","Number of motor poles":"10","Supply voltage limits":"100...240 V","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"2","Output current 3s peak":"18 A 230 V 3 s","Continuous stall torque":"53.1 lbf.in (6 N.m) 115...230 V single phase","IP Degree of Protection":"IP65","Maximum radial force Fr":"990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm 580 N 5000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"6 A","Maximum mechanical speed":"6000 rpm","Network frequency limits":"47.5...63 Hz","Number of mounting holes":"4","Continuous output current":"6 A 8 kHz","Product or Component Type":"Servo motor with power stage","Speed feedback resolution":"32768 points/turn","[Us] rated supply voltage":"115...230 V - 15...10 %","Distance shaft shoulder-flange":"0.1 in (3.5 mm)","Stator electrical time constant":"4.35 ms 68 °F (20 °C)","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e9de60f798dd66d84c31f328eb0789c9.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/BMI1002T26A/alternatives.json"},"ai":{"faq":[{"question":"What phase is this motor?","answer":"Single phase."},{"question":"What is the feedback type?","answer":"Absolute single-turn SinCos Hiperface encoder."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BMI1002T26A","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BMI1002T26A when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}