{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BMI1002T31F","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BMI1002T31F","canonicalUrl":"https://aoctrl.com/schneider/BMI1002T31F","factsUrl":"https://aoctrl.com/api/mcp/products/BMI1002T31F","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric BMI1002T31F single-phase servomotor, 750W/1300W, IP65, absolute SinCos Hiperface feedback, holding brake, integrated EMC filter, keyed shaft, 100mm flange.","salesMarkdown":"## What the BMI1002T31F delivers on your motion axis The Schneider Electric BMI1002T31F is a single-phase servomotor from the BMI series. It delivers 750W at 115 V single phase or 1300 W at 230 V single phase, with a continuous stall torque of 6 N.m and a peak stall torque of 14.5 N.m. The absolute single-turn SinCos Hiperface feedback gives you exact rotor position on power-up — no homing routine needed. An integrated holding brake holds 5.5 N.m, so vertical or inclined loads stay put when the drive is off. The IP65 enclosure and integrated EMC filter let this motor run in washdown zones without external hardware. ## Mechanical and mounting fit Flange measures 100 mm (3.9 in) with a centring collar depth of 3.5 mm (0.1 in). The keyed shaft is 19 mm diameter x 40 mm long, with a 6 mm key width. Natural convection cooling — no fan required. Cable connection is via a printed circuit board connector. Axial force limit is 0.2 x radial force, and radial force at 1000 rpm is rated for 990 N, derating to 580 N at 5000 rpm.","metaTitle":"Schneider BMI1002T31F Servomotor, 750W Single Phase, IP65","metaDescription":"Active production BMI1002T31F single-phase servomotor with absolute SinCos Hiperface feedback, holding brake, 750W/1300W, IP65, integrated EMC filter.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":[],"specifications":{"Phase":"Single phase","Length":"11.1 in (282 mm)","Category":"US1PC5618287","Key width":"0.2 in (6 mm)","Shaft end":"Keyed","EMC filter":"Integrated","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Feedback type":"Absolute single turn SinCos Hiperface","Holding brake":"With","Nominal speed":"1400 rpm 115 V single phase 3000 rpm 230 V single phase","Rotor inertia":"6.77 kg.cm²","Holding torque":"48.7 lbf.in (5.5 N.m) holding brake","Nominal torque":"47.8 lbf.in (5.4 N.m) 115 V single phase 38.9 lbf.in (4.4 N.m) 230 V single phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"0.89 N.m/A 68 °F (20 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Supply frequency":"50/60 Hz - 5...5 %","Back emf constant":"58.5 V/krpm 68 °F (20 °C)","Device short name":"BMI","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"128.3 lbf.in (14.5 N.m) 115 V single phase 128.3 lbf.in (14.5 N.m) 230 V single phase","Stator inductance":"4.7 mH 68 °F (20 °C)","Stator resistance":"1.08 Ohm 68 °F (20 °C)","Brake pull-in power":"8 W","Maximum current Irms":"30 A 115 V, single phase 30 A 230 V, single phase","Nominal output power":"750 W 115 V single phase 1300 W 230 V single phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Printed circuit board connector","Nbr. of units in pkg.":"1","Number of motor poles":"10","Supply voltage limits":"100...240 V","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"2","Output current 3s peak":"18 A 230 V 3 s","Continuous stall torque":"53.1 lbf.in (6 N.m) 115...230 V single phase","IP Degree of Protection":"IP65","Maximum radial force Fr":"990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm 580 N 5000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"6 A","Maximum mechanical speed":"6000 rpm","Network frequency limits":"47.5...63 Hz","Number of mounting holes":"4","Continuous output current":"6 A 8 kHz","Product or Component Type":"Servo motor with power stage","Speed feedback resolution":"131072 points/turn","[Us] rated supply voltage":"115...230 V - 15...10 %","Distance shaft shoulder-flange":"0.1 in (3.5 mm)","Stator electrical time constant":"4.35 ms 68 °F (20 °C)","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$3,380.00 – $4,626.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/c4a8ceeedfcc9d6a2f3b004157b1e3f7.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/BMI1002T31F/alternatives.json"},"ai":{"faq":[{"question":"What phase is BMI1002T31F rated for?","answer":"It is a single-phase servomotor, operating on 100...240 V single phase at 50/60 Hz (±5%)."},{"question":"What is the overall length of BMI1002T31F?","answer":"The motor length is 11.1 inches (282 mm)."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BMI1002T31F","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BMI1002T31F when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}