{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BMI1003P12F","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BMI1003P12F","canonicalUrl":"https://aoctrl.com/schneider/BMI1003P12F","factsUrl":"https://aoctrl.com/api/mcp/products/BMI1003P12F","rawCanonicalId":null},"summary":{"shortDescription":"BMI BMI1003P12F, three-phase servo motor, 1000-2100 W, 1500-3700 rpm, with holding brake, absolute multiturn Hiperface encoder, integrated EMC filter, IP65, flange 100 mm, keyed shaft 19 mm, 338 mm length.","salesMarkdown":"The BMI1003P12F: The absolute multiturn SinCos Hiperface feedback keeps position on power loss—no homing cycle needed on restart. Integrated EMC filter saves an external box on the line side. Natural convection cooling means no fan to fail, but watch continuous stall torque (8.5 N·m) in a tight cabinet; derate if the ambient climbs much above 40 °C. Rated for 208–480 V three-phase, 50/60 Hz ±5 %. Stator inductance 11.43 mH, resistance 2.31 Ω at 20 °C. Peak stall torque 19.2 N·m across the voltage range—enough for short overloads. The 10-pole design gives smooth low-speed torque for direct-drive or low-ratio applications. Lifecycle stage is marked current—this is an active-production part. No obsolescence notice.","metaTitle":"BMI1003P12F Servo Motor, 1/2 kW, 1500-3700 rpm, Holding Brak","metaDescription":"BMI1003P12F three-phase servo motor, 1-2.1 kW output, holding brake, integrated EMC filter, absolute Hiperface encoder, IP65 housing, flange 100mm, keyed shaft 19mm, 13.3 in length","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":[],"specifications":{"Phase":"Three phase","Length":"13.3 in (338 mm)","Category":"US1PC5618287","Key width":"0.2 in (6 mm)","Shaft end":"Keyed","EMC filter":"Integrated","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Feedback type":"Absolute multiturn SinCos Hiperface","Holding brake":"With","Nominal speed":"1500 rpm 208 V three phase 3000 rpm 400 V three phase 3700 rpm 480 V three phase","Rotor inertia":"10.3 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m) holding brake","Nominal torque":"63.7 lbf.in (7.2 N.m) 208 V three phase 60.2 lbf.in (6.8 N.m) 400 V three phase 49.6 lbf.in (5.6 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.7 N.m/A 68 °F (20 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Supply frequency":"50/60 Hz - 5...5 %","Back emf constant":"112 V/krpm 68 °F (20 °C)","Device short name":"BMI","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"169.9 lbf.in (19.2 N.m) 400 V three phase 169.9 lbf.in (19.2 N.m) 480 V three phase 169.9 lbf.in (19.2 N.m) 208 V three phase","Stator inductance":"11.43 mH 68 °F (20 °C)","Stator resistance":"2.31 Ohm 68 °F (20 °C)","Brake pull-in power":"8 W","Maximum current Irms":"26.7 A 208 V, three phase 26.7 A 400 V, three phase 26.7 A 480 V, three phase","Nominal output power":"1000 W 208 V three phase 2000 W 400 V three phase 2100 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Printed circuit board connector","Nbr. of units in pkg.":"1","Number of motor poles":"10","Supply voltage limits":"208...480 V","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"3","Output current 3s peak":"12 A 400 V 3 s","Continuous stall torque":"75.2 lbf.in (8.5 N.m) 208...480 V three phase","IP Degree of Protection":"Shaft IP54 Housing IP65","Maximum radial force Fr":"1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm 660 N 4000 rpm 610 N 5000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"4 A","Maximum mechanical speed":"6000 rpm","Network frequency limits":"47.5...63 Hz","Number of mounting holes":"4","Continuous output current":"4 A 8 kHz","Product or Component Type":"Servo motor with power stage","Speed feedback resolution":"131072 points/turn x 4096 turns","[Us] rated supply voltage":"208...480 V - 15...10 %","Distance shaft shoulder-flange":"0.1 in (3.5 mm)","Stator electrical time constant":"4.95 ms 68 °F (20 °C)","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2,805.00 – $4,606.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/c4a8ceeedfcc9d6a2f3b004157b1e3f7.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/BMI1003P12F/alternatives.json"},"ai":{"faq":[{"question":"What phase is the BMI1003P12F?","answer":"Three phase."},{"question":"What is the length of the BMI1003P12F?","answer":"13.3 in (338 mm)."},{"question":"What is the holding brake torque?","answer":"9 N·m (79.7 lbf·in)."},{"question":"What feedback type does the BMI1003P12F use?","answer":"Absolute multiturn SinCos Hiperface."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BMI1003P12F","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BMI1003P12F when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}