{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BMI1003P16F","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BMI1003P16F","canonicalUrl":"https://aoctrl.com/schneider/BMI1003P16F","factsUrl":"https://aoctrl.com/api/mcp/products/BMI1003P16F","rawCanonicalId":null},"summary":{"shortDescription":"BMI1003P16F absolute single-turn SinCos Hiperface servomotor, three-phase, IP65 housing, natural convection cooling, integrated holding brake, 100 mm flange.","salesMarkdown":"## Part identity and key specs This BMI1003P16F is a three-phase, 10-pole servomotor from the BMI series with a 100 mm flange. It carries an absolute single-turn SinCos Hiperface feedback, so it retains shaft position on power-down without a battery—important for homing on indexing axes. The integrated holding brake delivers 9 Nm holding torque (79.7 lbf.in), enough to hold a vertical load of typical dimensions without a separate mechanical brake. Shaft dimensions are 19 mm diameter, keyed, with 40 mm shaft length and a 6 mm key width—compatible with common zero-backlash couplings and pulleys. The motor is rated for 208...480 V three-phase, 50/60 Hz, and delivers nominal power from 1000 W (208 V) to 2100 W (480 V). ## Lifecycle and supply The BMI1003P16F is in active, current production (lifecycle stage: current). There is no announced end-of-life or replacement. Sourcing is straightforward: we can quote this against an RFQ with a firm lead time. No need to worry about a last-time-buy or preemptive stockpiling for this line. The motor mounts via an international standard flange (flange size 100 mm, centring collar depth 3.5 mm). Housing protection is IP65—suitable for washdown and dusty areas—but the shaft seal is only IP54, so you'll want to avoid direct high-pressure spray on the shaft extension. Cooling is natural convection, no fan required, but check the thermal limits if running continuous near peak stall torque (19.2 Nm) at low speed. Electrical connection uses a printed circuit board connector. The motor includes an integrated EMC filter. ## Sourcing takeaway For a sourcing buyer, the key decision points are: three-phase supply compatibility (208-480 V), the absolute Hiperface feedback (matches most popular servo drives without extra encoder conversion), and the integrated holding brake. The high torque constant (1.7 Nm/A at 20°C) and low stator resistance (2.31 ohm) mean efficient torque delivery. No known cross-ship issues with this model—just match the drive's feedback interface to SinCos Hiperface.","metaTitle":"BMI1003P16F BMI servomotor, three-phase, Hiperface, brake","metaDescription":"BMI1003P16F three-phase servomotor, 208-480V, absolute SinCos Hiperface feedback, holding brake, IP65 housing. Active production, RFQ for lead time.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":[],"specifications":{"Phase":"Three phase","Length":"13.3 in (338 mm)","Category":"US1PC5618287","Key width":"0.2 in (6 mm)","Shaft end":"Keyed","EMC filter":"Integrated","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Feedback type":"Absolute single turn SinCos Hiperface","Holding brake":"With","Nominal speed":"1500 rpm 208 V three phase 3000 rpm 400 V three phase 3700 rpm 480 V three phase","Rotor inertia":"10.3 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m) holding brake","Nominal torque":"63.7 lbf.in (7.2 N.m) 208 V three phase 60.2 lbf.in (6.8 N.m) 400 V three phase 49.6 lbf.in (5.6 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.7 N.m/A 68 °F (20 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Supply frequency":"50/60 Hz - 5...5 %","Back emf constant":"112 V/krpm 68 °F (20 °C)","Device short name":"BMI","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"169.9 lbf.in (19.2 N.m) 400 V three phase 169.9 lbf.in (19.2 N.m) 480 V three phase 169.9 lbf.in (19.2 N.m) 208 V three phase","Stator inductance":"11.43 mH 68 °F (20 °C)","Stator resistance":"2.31 Ohm 68 °F (20 °C)","Brake pull-in power":"8 W","Maximum current Irms":"26.7 A 208 V, three phase 26.7 A 400 V, three phase 26.7 A 480 V, three phase","Nominal output power":"1000 W 208 V three phase 2000 W 400 V three phase 2100 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Printed circuit board connector","Nbr. of units in pkg.":"1","Number of motor poles":"10","Supply voltage limits":"208...480 V","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"3","Output current 3s peak":"12 A 400 V 3 s","Continuous stall torque":"75.2 lbf.in (8.5 N.m) 208...480 V three phase","IP Degree of Protection":"Shaft IP54 Housing IP65","Maximum radial force Fr":"1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm 660 N 4000 rpm 610 N 5000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"4 A","Maximum mechanical speed":"6000 rpm","Network frequency limits":"47.5...63 Hz","Number of mounting holes":"4","Continuous output current":"4 A 8 kHz","Product or Component Type":"Servo motor with power stage","Speed feedback resolution":"32768 points/turn","[Us] rated supply voltage":"208...480 V - 15...10 %","Distance shaft shoulder-flange":"0.1 in (3.5 mm)","Stator electrical time constant":"4.95 ms 68 °F (20 °C)","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$4,022.00 – $5,540.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/c4a8ceeedfcc9d6a2f3b004157b1e3f7.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/BMI1003P16F/alternatives.json"},"ai":{"faq":[{"question":"What phase is the BMI1003P16F?","answer":"It is a three-phase servomotor, rated for 208...480 V AC three-phase supply."},{"question":"What is the length of BMI1003P16F?","answer":"The overall length is 13.3 inches (338 mm). This measurement includes the motor body and shaft protrusion."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BMI1003P16F","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BMI1003P16F when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}