{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BMI1003P27F","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BMI1003P27F","canonicalUrl":"https://aoctrl.com/schneider/BMI1003P27F","factsUrl":"https://aoctrl.com/api/mcp/products/BMI1003P27F","rawCanonicalId":null},"summary":{"shortDescription":"BMI1003P27F, three-phase servo motor, IP65, holding brake, absolute multiturn SinCos Hiperface feedback, nominal torque 7.2 Nm at 208 V.","salesMarkdown":"The BMI1003P27F is a three-phase, 10-pole, 3-stack servo motor rated for 208–480 V supply. It ships with an integrated holding brake (9 Nm holding torque) and an absolute multiturn SinCos Hiperface feedback encoder — no external brake module or separate encoder purchase needed for positioning duties. Enclosure is IP65, so it handles washdown or dusty environments without an extra cover. Cooling is natural convection — no fan or forced air required. ## Torque, speed, and voltage — the practical curve Nominal torque drops as supply voltage rises: 7.2 Nm at 208 V, 6.8 Nm at 400 V, 5.6 Nm at 480 V. Peak stall torque stays constant at 19.2 Nm across the three voltage ranges. Nominal speed also varies — 1500 rpm at 208 V, 3000 rpm at 400 V, 3700 rpm at 480 V — so the same motor gives different output curves depending on what drive voltage you feed it. ## Mounting and connection Flange size is 100 mm (3.9 in) international standard. Shaft diameter 19 mm, untapped end, length 40 mm. Centring collar depth 3.5 mm. Mounting holes at 9 mm diameter — four-point pattern. Electrical connection via printed-circuit-board connector (no separate junction box). Radial force limits vary with speed: 1050 N at 1000 rpm down to 610 N at 5000 rpm; axial force limited to 20% of radial.","metaTitle":"BMI1003P27F Three-Phase Servo Motor, IP65, Holding Brake","metaDescription":"BMI1003P27F three-phase servo motor with IP65, 10-pole, 3-stack, absolute multiturn SinCos Hiperface feedback and holding brake. Nominal torque 7.2 Nm at 208 V. Current production,","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Phase":"Three phase","Length":"13.3 in (338 mm)","Category":"US1PC5618287","Shaft end":"Untapped","EMC filter":"Integrated","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Feedback type":"Absolute multiturn SinCos Hiperface","Holding brake":"With","Nominal speed":"1500 rpm 208 V three phase 3000 rpm 400 V three phase 3700 rpm 480 V three phase","Rotor inertia":"10.3 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m) holding brake","Nominal torque":"63.7 lbf.in (7.2 N.m) 208 V three phase 60.2 lbf.in (6.8 N.m) 400 V three phase 49.6 lbf.in (5.6 N.m) 480 V three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.7 N.m/A 68 °F (20 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Mounting Support":"International standard flange","Supply frequency":"50/60 Hz - 5...5 %","Back emf constant":"112 V/krpm 68 °F (20 °C)","Device short name":"BMI","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"169.9 lbf.in (19.2 N.m) 400 V three phase 169.9 lbf.in (19.2 N.m) 480 V three phase 169.9 lbf.in (19.2 N.m) 208 V three phase","Stator inductance":"11.43 mH 68 °F (20 °C)","Stator resistance":"2.31 Ohm 68 °F (20 °C)","Brake pull-in power":"8 W","Maximum current Irms":"26.7 A 208 V, three phase 26.7 A 400 V, three phase 26.7 A 480 V, three phase","Nominal output power":"1000 W 208 V three phase 2000 W 400 V three phase 2100 W 480 V three phase","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Printed circuit board connector","Nbr. of units in pkg.":"1","Number of motor poles":"10","Supply voltage limits":"208...480 V","Maximum axial force Fa":"0.2 x Fr","Number of motor stacks":"3","Output current 3s peak":"12 A 400 V 3 s","Continuous stall torque":"75.2 lbf.in (8.5 N.m) 208...480 V three phase","IP Degree of Protection":"IP65","Maximum radial force Fr":"1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm 660 N 4000 rpm 610 N 5000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"4 A","Maximum mechanical speed":"6000 rpm","Network frequency limits":"47.5...63 Hz","Number of mounting holes":"4","Continuous output current":"4 A 8 kHz","Product or Component Type":"Servo motor with power stage","Speed feedback resolution":"32768 points/turn x 4096 turns","[Us] rated supply voltage":"208...480 V - 15...10 %","Distance shaft shoulder-flange":"0.1 in (3.5 mm)","Stator electrical time constant":"4.95 ms 68 °F (20 °C)","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/246cfcd68e3d32f3a81380264e7cf7d5.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/BMI1003P27F/alternatives.json"},"ai":{"faq":[{"question":"What is the phase configuration of the BMI1003P27F?","answer":"It is a three-phase servo motor."},{"question":"What is the overall length of the BMI1003P27F?","answer":"The length is 13.3 in (338 mm)."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BMI1003P27F","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BMI1003P27F when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}