{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BMXAMI0810","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BMXAMI0810","canonicalUrl":"https://aoctrl.com/schneider/BMXAMI0810","factsUrl":"https://aoctrl.com/api/mcp/products/BMXAMI0810","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Modicon X80 BMXAMI0810, isolated analog input module, 8 inputs, high-speed, 16-bit, 0.075% accuracy on voltage.","salesMarkdown":"The Schneider BMXAMI0810 is an 8-channel isolated analog input module for the Modicon X80 platform, offering 0.075% measurement error on voltage ranges and a 1 ms + 1 ms fast read cycle per channel – a combination that holds the zone for injection molding process control where shot-to-shot consistency depends on tight pressure and temperature signal acquisition. Input impedance sits at 10 MOhm in voltage mode or 250 Ohm plus a protective resistor in current mode, so the module loads the loop minimally and doesn't pull the cavity pressure transducer curve off zero. The 16-bit ADC delivers 15 bits plus sign resolution; that means 0.36 mV steps on the ±10V range and 1.4 µA steps on the current ranges – fine enough to catch the pressure rise that signals cavity fill. ## Fast read cycle – what it means for the loop Fast read cycle time is 1 ms + 1 ms per channel. For 8 channels the nominal read cycle is 9 ms. A first-order digital filter rejects electrical noise from the molding machine's servo drives, with 80 dB common-mode rejection and channel-to-channel isolation at 300 V DC – so a ground loop on a thermocouple input won't skew the adjacent pressure channel reading. Channels are isolated from each other (300 V DC) and from ground and the backplane bus (1400 V DC). This lets you mix 4-20 mA pressure transducers with voltage-output melt thermocouples on the same card without lifting grounds. MTBF is 900000 H at standard conditions. Operating temperature range 0-60 °C and relative humidity 5-95 % at 55 °C. ## Panel wiring note Electrical connection is a single 28-way connector. Current consumption: 150 mA at 3.3 V DC and 54 mA at 24 V DC. That keeps the rack power budget in check – plan for 1.5 W max from the 24 V supply rail. The module's IP20 rating means it's for cabinet-internal mounting only. Vibration resistance is 3 gn, shock 30 gn – fits a machine-side cabinet on a hydraulic press without derating.","metaTitle":"Schneider BMXAMI0810 High-Speed 8-Ch Analog Input","metaDescription":"Active production BMXAMI0810 analog input module with 8 isolated channels, 16-bit ADC, 0.075% measurement error on +/-10V, and 1 ms + 1 ms per channel fast read cycle. IEC 61131-2","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Standards":"IEC 61010-2-201 IEC 61131-2 UL 61010-2-201 CSA C22.2 No 61010-2-201","Directives":"2014/35/EU - low voltage directive 2014/30/EU - electromagnetic compatibility","Status LED":"1 LED (green) RUN 1 LED per channel (green) channel diagnostic 1 LED (red) ERR 1 LED (red) I/O","Input level":"High level","Type of filter":"First order digital filtering","Input impedance":"10 MOhm in voltage mode 250 Ohm + 3.6...50 Ohm internal protective resistor in current mode","lifecycle_stage":"current","MTBF reliability":"900000 H","Range of product":"Modicon X80","Shock resistance":"30 gn","Isolation voltage":"300 V DC between channels 1400 V DC between channels and ground 1400 V DC between channels and bus","Measurement error":"0.15 % of full scale +/- 20 mA 25 °C 0.15 % of full scale 0...20 mA 25 °C 0.15 % of full scale 4...20 mA 25 °C 0.075 % of full scale +/- 10 V 25 °C 0.075 % of full scale 0...10 V 25 °C 0.075 % of full scale 0...5 V 25 °C 0.075 % of full scale 1...5 V 25 °C 0.075 % of full scale +/- 5 V 25 °C","Relative humidity":"5...95 % at 55 °C without condensation","Temperature drift":"30 ppm/°C +/- 10 V 30 ppm/°C +/- 5 V 30 ppm/°C 0...10 V 30 ppm/°C 0...5 V 30 ppm/°C 1...5 V 50 ppm/°C +/- 20 mA 50 ppm/°C 0...20 mA 50 ppm/°C 4...20 mA","Operating altitude":"0...2000 m 2000...5000 m with derating factor","Analogue input type":"Current +/- 20 mA Current 0...20 mA Current 4...20 mA Voltage +/- 10 V Voltage +/- 5 V Voltage 0...10 V Voltage 0...5 V Voltage 1...5 V","Current consumption":"150 mA at 3.3 V DC 54 mA at 24 V DC","Digital value format":"- 32768 to + 32767 in maximum user scale +/- 10000 by default","Fast read cycle time":"1 ms + 1 ms x number of channels used","Protective treatment":"Standard version","Vibration resistance":"3 gn","Analogue input number":"8","Common mode rejection":"80 dB","Electrical connection":"28 ways 1 connector","Measurement resolution":"0.36 mV +/- 10 V 0.36 mV 0...10 V 0.36 mV 0...5 V 0.36 mV 1...5 V 0.36 mV +/- 5 V 1.4 µA +/- 20 mA 1.4 µA 0...20 mA 1.4 µA 4...20 mA","Power consumption in W":"1.06 W 24 V DC typical 1.50 W 24 V DC maximum 0.32 W 3.3 V DC typical 0.48 W 3.3 V DC maximum","IP degree of protection":"IP20","Nominal read cycle time":"9 ms for 8 channels","Maximum conversion value":"+/- 11.4 V +/- 10 V +/- 11.4 V 0...10 V +/- 11.4 V 0...5 V +/- 11.4 V 1...5 V 0...30 mA +/- 20 mA 0...30 mA 0...20 mA 0...30 mA 4...20 mA 0...30 mA +/- 5 V","Analog/digital conversion":"16 bits","Analogue input resolution":"15 bits + sign","Product or component type":"Analog input module","Isolation between channels":"Isolated","Permitted overload on inputs":"+/- 30 mA 0...20 mA +/- 30 mA 4...20 mA +/- 30 V +/- 10 V +/- 30 V +/- 5 V +/- 30 V 0...10 V +/- 30 V 0...5 V +/- 30 V 1...5 V +/- 30 mA +/- 20 mA","Minimum crosstalk attenuation":"80 dB","Ambient air temperature for storage":"-40...85 °C","Ambient air temperature for operation":"0...60 °C","Precision of internal conversion resistor":"0.1 % - 15 ppm/°C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$389.89 – $941.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/70dce68ea42c2efd847264d6dd1659d7.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/BMXAMI0810/alternatives.json"},"ai":{"faq":[{"question":"What standards does BMXAMI0810 comply with?","answer":"It is certified to IEC 61010-2-201, IEC 61131-2, UL 61010-2-201, and CSA C22.2 No 61010-2-201, and meets the Low Voltage Directive 2014/35/EU and EMC Directive 2014/30/EU."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BMXAMI0810","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BMXAMI0810 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}