{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BMXAMM0600","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BMXAMM0600","canonicalUrl":"https://aoctrl.com/schneider/BMXAMM0600","factsUrl":"https://aoctrl.com/api/mcp/products/BMXAMM0600","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Modicon X80 BMXAMM0600 mixed analog I/O module, 4 inputs / 2 outputs, 12-14 bit input resolution, 1400 VDC isolation, active production.","salesMarkdown":"The BMXAMM0600 provides 4 analog inputs and 2 analog outputs, mixing sensing and control in one slot. Listed as current production, so no end-of-life clock ticking. The module carries IEC 61010-2-201, IEC 61131-2, UL 61010-2-201, and CSA C22.2 No 61010-2-201 — covers both the panel safety standard and the programmable-controller base standard. Also complies with the low-voltage directive 2014/35/EU and the EMC directive 2014/30/EU. MTBF is 1,400,000 hours, which for a line-down spare decision is comfortable headroom. ## Integration notes Draws 240 mA from the 3.3 V backplane bus, plus up to 3.2 W from 24 V typical. Analog connection via a single 20-way spring-cage connector. Input impedance 250 ohms. Conversion time under 2 ms for the whole scan; fast read cycle at 1 ms + 1 ms per channel. First-order digital filtering is baked into the firmware. Isolation between channels and ground or bus is 1400 VDC — enough to keep noise from a motor drive out of the measurement path. IP20 enclosure, so it lives in a cabinet, not the field.","metaTitle":"Schneider BMXAMM0600 Modicon X80 Mixed Analog I/O, 4In/2Out","metaDescription":"Active-production BMXAMM0600 mixed analog I/O module: 4 inputs, 2 outputs, 12-14 bit resolution, 1400 VDC isolation. UL, CSA, IEC 61010-2-201. RFQ to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Standards":"IEC 61010-2-201 IEC 61131-2 UL 61010-2-201 CSA C22.2 No 61010-2-201","Directives":"2014/35/EU - low voltage directive 2014/30/EU - electromagnetic compatibility","Status LED":"1 LED (green) RUN 1 LED per channel (green) channel diagnostic 1 LED (red) ERR 1 LED (red) I/O","Input level":"High level","Output level":"High level","Fallback mode":"Predefined Configurable","Recalibration":"Factory calibrated on outputs Internal on inputs","Type of filter":"First order digital filtering by firmware","Conversion time":"<= 2 ms","Input impedance":"250 Ohm","lifecycle_stage":"current","MTBF reliability":"1400000 H","Range of product":"Modicon X80","Shock resistance":"30 gn","Isolation voltage":"1400 V DC between channels and ground 1400 V DC between channels and bus 750 V DC between group of I/O channels","Measurement error":"0.25 % of full scale 0...20 mA 25 °C output 0.25 % of full scale 4...20 mA 25 °C output 0.25 % of full scale +/- 10 V 25 °C output 0.25 % of full scale +/- 10 V 25 °C input 0.25 % of full scale 0...10 V 25 °C input 0.25 % of full scale 0...5 V 25 °C input 0.25 % of full scale 1...5 V 25 °C input 0.35 % of full scale 0...20 mA 25 °C input 0.35 % of full scale 4...20 mA 25 °C","Relative humidity":"5...95 % at 55 °C without condensation","Temperature drift":"100 ppm/°C +/- 10 V output 100 ppm/°C 0...20 mA output 100 ppm/°C 4...20 mA output 30 ppm/°C +/- 10 V input 30 ppm/°C 0...10 V input 30 ppm/°C 0...5 V input 30 ppm/°C 1...5 V input 50 ppm/°C 0...20 mA input 50 ppm/°C 4...20 mA input","Operating altitude":"0...2000 m 2000...5000 m with derating factor","Analogue input type":"Current 0...20 mA Current 4...20 mA Voltage +/- 10 V Voltage 0...10 V Voltage 0...5 V Voltage 1...5 V","Current consumption":"240 mA at 3.3 V DC","Analogue output type":"Current: 0...20 mA Current: 4...20 mA Voltage: +/- 10 V","Fast read cycle time":"1 ms + 1 ms x number of channels used","Protective treatment":"Standard version","Vibration resistance":"3 gn","Analogue input number":"4","Common mode rejection":"80 dB","Electrical connection":"20 ways 1 connector","Analogue output number":"2","Power consumption in W":"2.6 W 24 V DC typical 3.2 W 24 V DC maximum 0.35 W 3.3 V DC typical 0.48 W 3.3 V DC maximum","IP degree of protection":"IP20","Nominal read cycle time":"5 ms for 4 channels","Maximum conversion value":"+/- 11.25 V +/- 10 V output +/- 11.25 V +/- 10 V input 0...30 mA 0...20 mA input 0...30 mA 4...20 mA input +/- 11.25 V 0...10 V input +/- 11.25 V 0...5 V input +/- 11.25 V 1...5 V input 0...24 mA 0...20 mA output 0...24 mA 4...20 mA output","Analogue input resolution":"12 bits 0...20 mA 12 bits 0...5 V 12 bits 1...5 V 12 bits 4...20 mA 13 bits 0...10 V 14 bits +/- 10 V","Product or component type":"Mixed analog I/O module","Analogue output resolution":"11 bits, 0...20 mA 11 bits, 4...20 mA 12 bits, +/- 10 V","Isolation between channels":"Non isolated","Permitted overload on inputs":"+/- 30 mA 0...20 mA +/- 30 mA 4...20 mA +/- 30 V +/- 10 V +/- 30 V 0...10 V +/- 30 V 0...5 V +/- 30 V 1...5 V","Minimum crosstalk attenuation":"70 dB","Ambient air temperature for storage":"-40...85 °C","Ambient air temperature for operation":"0...60 °C","Precision of internal conversion resistor":"0.1 % - 15 ppm/°C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$314.96 – $760.18","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/6de155fe3b3f3d67bcaa0926e34fef84.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/BMXAMM0600/alternatives.json"},"ai":{"faq":[{"question":"What safety and performance standards does the BMXAMM0600 meet?","answer":"The module is certified to IEC 61010-2-201, IEC 61131-2, UL 61010-2-201, and CSA C22.2 No 61010-2-201, and it complies with the EU low-voltage directive (2014/35/EU) and EMC directive (2014/30/EU)."},{"question":"Will the BMXAMM0600 drop into a panel that was wired for a BMXAMO0210 without rewiring?","answer":"The BMXAMM0600 is a mixed 4-input / 2-output module, while the BMXAMO0210 is output-only (two channels). Both share the same X80 rack footprint and bus connector, so the module physically fits. However, the analog output terminal wiring may be compatible, but you will need to add wiring for the four analog inputs if your application uses them. The I/O mapping in the control program also needs updating."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BMXAMM0600","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BMXAMM0600 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}