{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BMXAMO0410","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BMXAMO0410","canonicalUrl":"https://aoctrl.com/schneider/BMXAMO0410","factsUrl":"https://aoctrl.com/api/mcp/products/BMXAMO0410","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Modicon X80 series, BMXAMO0410 analog output module, 4 isolated outputs, 0.1 % of full scale accuracy, ≤1 ms conversion time, rack-powered.","salesMarkdown":"## Integrator note — channel assignment and isolation The BMXAMO0410 is a 4-channel isolated analog output module for the Modicon X80 rack. Each channel is configurable for current (0...20 mA or 4...20 mA) or voltage (+/- 10 V) outputs, with isolation between channels, between channels and ground (1400 V DC), and between channels and bus (1400 V DC). Conversion completes in ≤1 ms, supporting loop update rates typical of process and motion applications. ## Accuracy and stability Full-scale measurement error is 0.1 % at 25 °C, with temperature drift held to 45 ppm/°C across both current and voltage ranges. Common-mode rejection is 100 dB, and crosstalk attenuation between channels stays above 80 dB — figures that matter when the module drives multiple loops in electrically noisy cabinets. Resolution is 15 bits plus sign, with a maximum conversion value of 0...21 mA or +/-10.5 V. ## Diagnostics and fallback Each channel has a green diagnostic LED; a shared red I/O fault LED covers module-level errors. Open-wire detection is built in for current loops, and short-circuit detection for voltage outputs. Fallback mode is configurable to a predefined value — useful for holding a safe state during bus interruption. The module draws power from the rack backplane (150 mA at 3.3 V DC, 140 mA at 24 V DC), so no separate supply wiring.","metaTitle":"Schneider BMXAMO0410 Modicon X80 4-Ch Isolated Analog Output","metaDescription":"Active BMXAMO0410 analog output module, 4 isolated channels, 0.1% FS accuracy, 1 ms conversion, rack-powered, IEC/UL/CSA listed. Specify into BOM via RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Supply":"Internal power supply via rack","Standards":"IEC 61010-2-201 IEC 61131-2 UL 61010-2-201 CSA C22.2 No 61010-2-201","Directives":"2014/35/EU - low voltage directive 2014/30/EU - electromagnetic compatibility","Status LED":"1 LED (green) RUN 1 LED per channel (green) channel diagnostic 1 LED (red) ERR 1 LED (red) I/O","Output level":"High level","Fallback mode":"Configurable Predefined","Detection type":"Open circuit 0...20 mA Open circuit 4...20 mA Short circuit +/- 10 V","Conversion time":"<= 1 ms","lifecycle_stage":"current","MTBF reliability":"1000000 H","Range of product":"Modicon X80","Shock resistance":"30 gn","Isolation voltage":"1400 V DC between channels and ground 1400 V DC between channels and bus 750 V DC between channels","Measurement error":"0.1 % of full scale 25 °C","Relative humidity":"5...95 % at 55 °C without condensation","Temperature drift":"45 ppm/°C +/- 10 V 45 ppm/°C 0...20 mA 45 ppm/°C 4...20 mA","Operating altitude":"0...2000 m 2000...5000 m with derating factor","Current consumption":"150 mA at 3.3 V DC 140 mA at 24 V DC","Analogue output type":"Current: 0...20 mA Current: 4...20 mA Voltage: +/- 10 V","Load impedance ohmic":">= 1000 Ohm +/- 10 V <= 500 Ohm 4...20 mA","Protective treatment":"Standard version","Vibration resistance":"3 gn","Common mode rejection":"100 dB","Electrical connection":"20 ways 1 connector","Analogue output number":"4","Power consumption in W":"3 W 24 V DC typical 3.6 W 24 V DC maximum 0.45 W 3.3 V DC typical 0.51 W 3.3 V DC maximum","IP degree of protection":"IP20","Maximum conversion value":"0...21 mA 0...20 mA 0...21 mA 4...20 mA +/- 10.5 V +/- 10 V","Product or component type":"Analog output module","Analogue output resolution":"15 bits + sign","Isolation between channels":"Isolated","Minimum crosstalk attenuation":"80 dB","Ambient air temperature for storage":"-40...85 °C","Ambient air temperature for operation":"0...60 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$347.70 – $1,010.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/7af824bd6d3eabe9286f840908df9d69.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/BMXAMO0410/alternatives.json"},"ai":{"faq":[{"question":"What supply voltage does the BMXAMO0410 require?","answer":"The module is powered internally via the Modicon X80 rack backplane; no external power supply is needed."},{"question":"What standards does the BMXAMO0410 comply with?","answer":"It complies with IEC 61010-2-201, IEC 61131-2, UL 61010-2-201, and CSA C22.2 No 61010-2-201, along with the Low Voltage Directive (2014/35/EU) and EMC Directive (2014/30/EU)."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BMXAMO0410","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BMXAMO0410 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}