{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BMXAMO0802","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BMXAMO0802","canonicalUrl":"https://aoctrl.com/schneider/BMXAMO0802","factsUrl":"https://aoctrl.com/api/mcp/products/BMXAMO0802","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Modicon X80 BMXAMO0802 analog output module, 8 current outputs in 0...20 mA or 4...20 mA, 16-bit, backplane powered, current production per the lifecycle entry.","salesMarkdown":"The BMXAMO0802: Eight high-level current outputs cover 0...20 mA and 4...20 mA at 16-bit resolution, with a maximum conversion value reaching 0...21 mA on the 0...20 mA range and 4...20 mA on the live-zero range. Output load is rated ≤350 Ω on the 4...20 mA range, which sets the practical field-cable and actuator envelope. ## Loop performance and diagnostics The module reports open circuits on the 4...20 mA range and short circuits on the 0...20 mA range, and falls back to a configurable predefined output on rack comms loss. The front face carries a green RUN LED, a green channel-diagnostic LED per channel, a red ERR LED and a red I/O LED for at-a-glance status. Isolation is 1400 V DC between channels and ground and between channels and bus, with no channel-to-channel isolation — a configuration that suits a common-return actuator bundle but not loops that need galvanic separation between channels. Power consumption sits at 3.6 W typical and 3.9 W maximum from the 24 V DC rail, with 0.35 W typical and 0.48 W maximum from 3.3 V DC — useful for the rack power budget the integrator sizes before adding further analog modules. ## Environment, standards, and the rack envelope Operating temperature is 0...60 °C with storage from -40...85 °C; the module runs at altitudes up to 2000 m and derates from 2000 m to 5000 m. Mechanical ratings are 30 gn shock and 3 gn vibration, with 5...95 % relative humidity at 55 °C non-condensing. The IP20 housing and standard protective treatment match the rest of the X80 rack. Compliance is declared to IEC 61131-2 and IEC 61010-2-201, with UL 61010-2-201 and CSA C22.2 No 61010-2-201 for North American panels, and the 2014/35/EU low-voltage and 2014/30/EU EMC directives for the European market. Reliability is stated at 1,500,000 hours MTBF. The 4-channel sibling BMXAMO0410 carries the same Modicon X80 form factor but adds ±10 V voltage outputs alongside 0...20 mA and 4...20 mA, with channel-to-channel isolation at 750 V DC and a faster ≤1 ms conversion time. The BMXAMO0802 trades that voltage range and per-channel isolation for double the channel count, holding to current-only outputs at ≤4 ms conversion. For panels specified around BMXAMO0410, the BMXAMO0802 will physically drop into the same rack slot on the same 20-way connector, but the I/O map and field wiring must be reworked: voltage actuators on the four-channel module are not supported here, and channels share a common return.","metaTitle":"BMXAMO0802 Modicon X80 Analog Output, 8 ch, 4-20 mA","metaDescription":"Modicon X80 BMXAMO0802 analog output module, 8 current outputs (0...20 mA, 4...20 mA), 16-bit, ≤4 ms. Active per the lifecycle entry.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Supply":"Internal power supply via rack","Standards":"IEC 61010-2-201 IEC 61131-2 UL 61010-2-201 CSA C22.2 No 61010-2-201","Directives":"2014/35/EU - low voltage directive 2014/30/EU - electromagnetic compatibility","Status LED":"1 LED (green) RUN 1 LED per channel (green) channel diagnostic 1 LED (red) ERR 1 LED (red) I/O","Output level":"High level","Fallback mode":"Configurable Predefined","Detection type":"Open circuit 4...20 mA Short circuit 0...20 mA","Conversion time":"<= 4 ms","lifecycle_stage":"current","MTBF reliability":"1500000 H","Range of product":"Modicon X80","Shock resistance":"30 gn","Isolation voltage":"1400 V DC between channels and ground 1400 V DC between channels and bus","Measurement error":"0.1 % of full scale 25 °C","Relative humidity":"5...95 % at 55 °C without condensation","Temperature drift":"45 ppm/°C 0...20 mA 45 ppm/°C 4...20 mA","Operating altitude":"0...2000 m 2000...5000 m with derating factor","Current consumption":"150 mA at 3.3 V DC 135 mA at 24 V DC","Analogue output type":"Current: 0...20 mA Current: 4...20 mA","Load impedance ohmic":"<= 350 Ohm 4...20 mA","Protective treatment":"Standard version","Vibration resistance":"3 gn","Common mode rejection":"80 dB","Electrical connection":"20 ways 1 connector","Analogue output number":"8","Power consumption in W":"3.6 W 24 V DC typical 3.9 W 24 V DC maximum 0.35 W 3.3 V DC typical 0.48 W 3.3 V DC maximum","IP degree of protection":"IP20","Maximum conversion value":"0...21 mA 0...20 mA 0...21 mA 4...20 mA","Analogue input resolution":"16 bits","Product or component type":"Analog output module","Analogue output resolution":"16 bits","Isolation between channels":"Non isolated","Minimum crosstalk attenuation":"80 dB","Ambient air temperature for storage":"-40...85 °C","Ambient air temperature for operation":"0...60 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$389.89 – $886.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/6de155fe3b3f3d67bcaa0926e34fef84.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/BMXAMO0802/alternatives.json"},"ai":{"faq":[{"question":"What is the listed supply arrangement for the BMXAMO0802?","answer":"The module is powered internally from the rack backplane; it draws 150 mA at 3.3 V DC and 135 mA at 24 V DC, with no field supply terminal on the module itself."},{"question":"What standards and directives does the BMXAMO0802 carry?","answer":"The module is declared to IEC 61131-2 and IEC 61010-2-201, with UL 61010-2-201 and CSA C22.2 No 61010-2-201, and to the 2014/35/EU low-voltage and 2014/30/EU EMC directives."},{"question":"What is the closest functional second-source to the BMXAMO0802 from the same family?","answer":"The 4-channel BMXAMO0410 and the 2-channel BMXAMO0210 sit on the same Modicon X80 rack and connector and share the same standards footprint, but the BMXAMO0410 also adds ±10 V voltage outputs and per-channel isolation, and the BMXAMO0210 adds ±10 V as well, so neither is a drop-in for an eight-current-channel design."},{"question":"Will the BMXAMO0802 drop into a panel specified around BMXAMO0410 without rewiring?","answer":"The module shares the same Modicon X80 rack slot and 20-way connector as the BMXAMO0410, but the BMXAMO0802 is current-only with no channel-to-channel isolation, so any field wiring to ±10 V actuators must be reworked and the common return respected."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BMXAMO0802","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BMXAMO0802 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}