{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BMXAMO0802H","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BMXAMO0802H","canonicalUrl":"https://aoctrl.com/schneider/BMXAMO0802H","factsUrl":"https://aoctrl.com/api/mcp/products/BMXAMO0802H","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Modicon X80 BMXAMO0802H, 8-channel 16-bit analog output module, 0-20/4-20 mA, internal rack power, conformal coated for severe environments.","salesMarkdown":"The BMXAMO0802H: The module draws its power from the rack backplane (150 mA at 3.3 V DC and 135 mA at 24 V DC), with typical consumption of 3.6 W at 24 V DC. Isolation is rated at 1400 V DC between channels and ground, and between channels and bus; channels are non-isolated from each other. ## Severe Environment and Compliance Gas resistant class Gx and 3C4, dust and sand resistant class 3S4, salt level 2, mold and fungus resistant class 3B2. Conformal coating and Class I Division 2 rating. The module complies with IEC 61131-2, IEC 61000-6-4 (emission), IEC 61000-6-2 (immunity), and EN 61010-2-201. It operates from -25 to 70 °C ambient, with storage down to -40 °C. Relative humidity range is 5–95% at 55 °C without condensation. Operating altitude is up to 2000 m (derating to 5000 m). Shock resistance is 30 gn, vibration resistance 3 gn. ## Output Characteristics and Diagnostics Each of the eight outputs has a load impedance limit of 350 Ω for the 4-20 mA range. Maximum conversion value extends to 21 mA for both ranges. The module detects open circuit on the 4-20 mA range and short circuit on the 0-20 mA range. Fallback mode is configurable to predefined values.","metaTitle":"Schneider BMXAMO0802H, 8-Ch 16-bit Analog Output Module","metaDescription":"Active-production Modicon X80 analog output module, 8 channels 16-bit, 0-20/4-20 mA, internal rack power, conformal coating for severe environments. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Supply":"Internal power supply via rack","Standards":"IEC 61131-2 IEC 61000-6-4 IEC 61000-6-2 EN 61010-2-201","Status LED":"1 LED (green) RUN 1 LED per channel (green) channel diagnostic 1 LED (red) ERR 1 LED (red) I/O","Fallback mode":"Configurable Predefined","Detection type":"Open circuit 4...20 mA Short circuit 0...20 mA","Conversion time":"<= 4 ms","lifecycle_stage":"current","MTBF reliability":"1500000 H","Range of product":"Modicon X80","Shock resistance":"30 gn","Isolation voltage":"1400 V DC between channels and ground 1400 V DC between channels and bus","Measurement error":"0.1 % of full scale 25 °C","Relative humidity":"5...95 % at 55 °C without condensation","Temperature drift":"45 ppm/°C 0...20 mA 45 ppm/°C 4...20 mA","Operating altitude":"0...2000 m 2000...5000 m with derating factor","Current consumption":"150 mA at 3.3 V DC 135 mA at 24 V DC","Analogue output type":"Current: 0...20 mA Current: 4...20 mA","Load impedance ohmic":"<= 350 Ohm 4...20 mA","Protective treatment":"Conformal coating","Vibration resistance":"3 gn","Common mode rejection":"80 dB","Electrical connection":"20 ways 1 connector","Analogue output number":"8","Power consumption in W":"3.6 W 24 V DC typical 3.9 W 24 V DC maximum 0.35 W 3.3 V DC typical 0.48 W 3.3 V DC maximum","IP degree of protection":"IP20","Maximum conversion value":"0...21 mA 0...20 mA 0...21 mA 4...20 mA","Product or component type":"Analog output module","Analogue output resolution":"16 bits","Isolation between channels":"Non isolated","Environmental characteristic":"Gas resistant class Gx Gas resistant class 3C4 Dust resistant class 3S4 Sand resistant class 3S4 Salt resistant level 2 Mold growth resistant class 3B2 Fungal spore resistant class 3B2 Hazardous location class I division 2","Product specific application":"For severe environments","Minimum crosstalk attenuation":"80 dB","Ambient air temperature for storage":"-40...85 °C","Ambient air temperature for operation":"-25...70 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2,006.00 – $2,155.00","priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/BMXAMO0802H/alternatives.json"},"ai":{"faq":[{"question":"What is the BMXAMO0802H's supply method?","answer":"It is powered internally via the Modicon X80 rack backplane, drawing 150 mA at 3.3 V DC and 135 mA at 24 V DC."},{"question":"What standards does the BMXAMO0802H comply with?","answer":"It complies with IEC 61131-2, IEC 61000-6-4, IEC 61000-6-2, and EN 61010-2-201."},{"question":"What are the key ratings for the analog outputs?","answer":"Eight channels, 16-bit resolution, 0-20 mA or 4-20 mA range, conversion time ≤4 ms, load impedance ≤350 Ω, and 0.1% full-scale accuracy."},{"question":"Is the module rated for harsh environments?","answer":"Yes, it features conformal coating and is rated for severe environments including gas, dust, sand, salt, mold, and hazardous locations Class I Division 2."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BMXAMO0802H","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BMXAMO0802H when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}