{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BMXDDO1602","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BMXDDO1602","canonicalUrl":"https://aoctrl.com/schneider/BMXDDO1602","factsUrl":"https://aoctrl.com/api/mcp/products/BMXDDO1602","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Modicon X80 discrete output module, BMXDDO1602, 16 solid-state transistor outputs, 24V DC positive logic, 0.5 A per channel, 10 A per module.","salesMarkdown":"The BMXDDO1602 is a Modicon X80 discrete output module with 16 transistor outputs, 24V DC positive logic. Each output is rated 0.5 A (0.625 A per channel with external fuse), and the module can deliver up to 10 A total. Response time is 1.2 ms, and the outputs are short-circuit and overload protected via electronic circuit breaker and current limiter. Diagnostic LEDs include a green RUN LED, a green channel LED per output, a red ERR LED, and a red I/O LED. This gives immediate field visibility of module health and per-channel status without a software scan. ## Integration Notes Power draw is 79 mA at 3.3 V DC from the backplane. Per-channel output can be paralleled (max 2 outputs) for higher current – ensure the application stays within the module total of 10 A. The module requires a 2 A external fuse per output group for short-circuit protection; reverse polarity and overvoltage protection are built in. Outputs are positive logic (sourcing), so loads are switched by the output sinking current. Off-state leakage is 0.5 mA, which may cause faint glow on LEDs or slow drop on small relays. The module is IP20 rated, for use inside a control cabinet.","metaTitle":"Schneider BMXDDO1602 Modicon X80 16-Output Module, 24V DC, 0","metaDescription":"Active Modicon X80 discrete output module, 16 transistor outputs, 24V DC positive logic, 0.5A per channel, CE marked. Request quote for pricing and lead time.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Directives":"2014/35/EU - low voltage directive 2014/30/EU - electromagnetic compatibility","Status LED":"1 LED (green) module operating (RUN) 1 LED per channel (green) channel diagnostic 1 LED (red) module error (ERR) 1 LED (red) module I/O","Protection type":"External fuse reverse polarity protection short-circuit protection overload protection overvoltage protection","lifecycle_stage":"current","MTBF reliability":"410000 H","Range of product":"Modicon X80","Shock resistance":"30 gn","Relative humidity":"5...95 % at 55 °C without condensation","Operating altitude":"0...2000 m 2000...5000 m with derating factor","Current per channel":"0.625 A","Dielectric strength":"1500 V AC at 50/60 Hz 1 minute, output/ground 1500 V AC at 50/60 Hz 1 minute, output/internal logic","Switching frequency":"0.5/LI² Hz","Discrete output type":"Solid state","Load impedance ohmic":"> 48 Ohm","Maximum voltage drop":"10 MOhm 500 V DC","Protective treatment":"Standard version","Vibration resistance":"3 gn","Discrete output logic":"Positive","Maximum tungsten load":"6 W","Discrete output number":"16 conforming to IEC 61131-2","Paralleling of outputs":"Yes : 2 maximum","Power dissipation in W":"4 W","Discrete output current":"0.5 A","Discrete output voltage":"24 V 19...30 V DC","IP degree of protection":"IP20","Maximum leakage current":"0.5 mA at state 0","Response time on output":"1.2 ms","Product or component type":"Discrete output module","Maximum current per module":"10 A","Output overload protection":"With electronic circuit breaker 1.5 In < Id < 2 In With current limiter","Reverse polarity protection":"Reverse mounted diode","Typical current consumption":"79 mA at 3.3 V DC","Voltage detection threshold":"< 14 V DC preactuator fault > 18 V DC preactuator at state 0","Output overvoltage protection":"With transil diode","Output short-circuit protection":"With 2 A external fuse","Ambient air temperature for storage":"-40...85 °C","Ambient air temperature for operation":"0...60 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$132.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/9efeca9cd923eac3c725e2edbcc22269.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/BMXDDO1602/alternatives.json"},"ai":{"faq":[{"question":"What directives apply to this module?","answer":"It complies with the Low Voltage Directive 2014/35/EU and EMC Directive 2014/30/EU."},{"question":"What do the diagnostic LEDs indicate?","answer":"One green LED for module RUN, one green LED per channel for channel diagnostics, one red LED for module error (ERR), and one red LED for module I/O."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BMXDDO1602","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BMXDDO1602 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}