{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BMXDDO1602H","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BMXDDO1602H","canonicalUrl":"https://aoctrl.com/schneider/BMXDDO1602H","factsUrl":"https://aoctrl.com/api/mcp/products/BMXDDO1602H","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Modicon X80 discrete output module, 16 solid-state outputs, 24V DC positive, 0.5 A per channel, conformal coated for severe environments.","salesMarkdown":"The Schneider Electric BMXDDO1602H is a 16-point solid-state output module for the Modicon X80 platform, delivering 24 V DC positive logic at 0.5 A per channel with a module total of 10 A. It is built for severe environments with conformal coating and a wide operating temperature range from -25 to 70 °C. Each output is protected against short circuit (via a 2 A external fuse), overload (with an electronic circuit breaker), overvoltage (via transil diode), and reverse polarity (via diode). Response time is 1.2 ms, and dielectric strength between output and ground is 1500 V AC for one minute. LED diagnostics give instant status: a green RUN LED, a red ERR LED for module error, a red I/O LED, and a green LED per channel for channel diagnostic. ## Lifecycle and spares posture For existing Modicon X80 installations, this module is a direct drop-in replacement for 16-point positive-logic output slots. No last-time-buy or obsolescence watch required today. ## Installation and commissioning notes The module draws 79 mA from the 3.3 V DC backplane. It occupies a single slot in an X80 rack and is rated IP20. Ensure the external 2 A fuse is fitted per channel for short-circuit protection; the module also provides overload and overvoltage protection internally. Outputs are positive logic (sourcing) and can be paralleled for higher current up to two channels maximum. Watch the load impedance: ohmic loads above 48 Ω are specified for the output stage.","metaTitle":"BMXDDO1602H Modicon X80 16DO Solid State 24V DC","metaDescription":"Discrete output module, 16 solid-state outputs, 24V DC positive, 0.5 A per channel, conformal coated for severe environments. Current production, MTBF 410,000 h.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Directives":"2014/35/EU - low voltage directive 2014/30/EU - electromagnetic compatibility","Status LED":"1 LED (green) module operating (RUN) 1 LED per channel (green) channel diagnostic 1 LED (red) module error (ERR) 1 LED (red) module I/O","Protection type":"External fuse reverse polarity protection short-circuit protection overload protection overvoltage protection","lifecycle_stage":"current","MTBF reliability":"410000 H","Range of product":"Modicon X80","Shock resistance":"30 gn","Relative humidity":"5...95 % at 55 °C without condensation","Operating altitude":"0...2000 m 2000...5000 m with derating factor","Current per channel":"0.625 A","Dielectric strength":"1500 V AC at 50/60 Hz 1 minute, output/ground 1500 V AC at 50/60 Hz 1 minute, output/internal logic","Switching frequency":"0.5/LI² Hz","Discrete output type":"Solid state","Load impedance ohmic":"> 48 Ohm","Maximum voltage drop":"10 MOhm 500 V DC","Protective treatment":"Conformal coating","Vibration resistance":"3 gn","Discrete output logic":"Positive","Maximum tungsten load":"6 W","Discrete output number":"16 conforming to IEC 61131-2","Paralleling of outputs":"Yes : 2 maximum","Power dissipation in W":"4 W","Discrete output current":"0.5 A","Discrete output voltage":"24 V 19...30 V DC","IP degree of protection":"IP20","Maximum leakage current":"0.5 mA at state 0","Response time on output":"1.2 ms","Product or component type":"Discrete output module","Maximum current per module":"10 A","Output overload protection":"With electronic circuit breaker 1.5 In < Id < 2 In With current limiter","Reverse polarity protection":"Reverse mounted diode","Typical current consumption":"79 mA at 3.3 V DC","Voltage detection threshold":"< 14 V DC preactuator fault > 18 V DC preactuator at state 0","Environmental characteristic":"Gas resistant class Gx Gas resistant class 3C4 Dust resistant class 3S4 Sand resistant class 3S4 Salt resistant level 2 Mold growth resistant class 3B2 Fungal spore resistant class 3B2","Product specific application":"For severe environments","Output overvoltage protection":"With transil diode","Output short-circuit protection":"With 2 A external fuse","Ambient air temperature for storage":"-40...85 °C","Ambient air temperature for operation":"-25...70 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$399.00 – $555.47","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/9efeca9cd923eac3c725e2edbcc22269.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/BMXDDO1602H/alternatives.json"},"ai":{"faq":[{"question":"What directives does the BMXDDO1602H comply with?","answer":"It is designed to comply with 2014/35/EU low voltage directive and 2014/30/EU electromagnetic compatibility directive."},{"question":"What do the status LEDs indicate?","answer":"One green LED indicates module operating (RUN), one red LED indicates module error (ERR), one red LED indicates module I/O error, and one green LED per channel indicates channel diagnostic."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BMXDDO1602H","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BMXDDO1602H when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}