{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BMXETM0200H","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BMXETM0200H","canonicalUrl":"https://aoctrl.com/schneider/BMXETM0200H","factsUrl":"https://aoctrl.com/api/mcp/products/BMXETM0200H","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Modicon X80 high-speed frequency module, 2 channels, 1 ms cycle time, Class I Div 2, conformal coated, BMXETM0200H.","salesMarkdown":"The Schneider Electric BMXETM0200H is a frequency module in the Modicon X80 I/O family, with current lifecycle status, sized to measure speed and frequency on turbo machines. It is a standard-format, high-speed input / reflex digital output module built around two channels, accepting 2 MPU inputs and 2 APU inputs and delivering 2 outputs on a 28-pin front connector. ## Why a 1 ms cycle time matters here Cycle time is 1 ms with a 0.2 ms overlap and a built-in compare function, which is what lets the module keep pace with fast-shaft pulses rather than just count them slowly — the gating figure for any closed-loop overspeed or speed-match scheme on a turbo. Input frequency span is 0...500 kHz on the high-speed inputs, with current draw held to <= 30 mA at 24 V DC from the sensor rail, so the slot does not distort the backplane budget when an encoder or magnetic pick-up is wired in. ## Encoder / pick-up compatibility and output envelope The inputs accept 19.2...30 V incremental encoders, active pick-up sensors, and 10...30 V totem-pole magnetic pick-up sensors, with MPU input range 0.3...100 V AC and APU input range 2.5...30 V DC — so both legacy magnetic pickups and modern 24 V incremental encoders land on the same wiring block. Input voltage limits are 19.2...30 V at 60 °C and 26.4 V at 70 °C, while the reflex outputs deliver 24 V DC source logic with a maximum load of 1 A per module and 0.5 A per output, voltage drop <3 V at state 1, and 1.5 A integrated short-circuit protection per output. State discrimination is sharp: voltage state 0 guaranteed <0.3 V with 0.1 mA leakage at state 0, voltage state 1 guaranteed across the MPU and APU ranges above — useful when the reflex output is feeding a turbine controller that demands deterministic thresholds. ## Standards, environment, and isolation The module is conformally coated and rated to IEC 61131-2, IEC 61010-2-201, UL 61010-2-201, CSA C22.2 No 61010-2-201, IACS, IEC 61000-6-5 interface type 1 and type 2, IEC 61850-3 location G, and IEC 60079-0, with isolation at 1400 V DC for 1 min field/bus or ground and 1000 V DC for 1 min on differential interfaces and input/output. Operating envelope is -25...70 °C with 10...95 % non-condensing humidity and IP20 on the housing, and the part is qualified for gas, dust, sand, salt, mold, and fungal exposure per IEC 60721-3-3 classes plus hazardous location Class I Division 2 — the rating that lets it sit inside a turbine cabinet. EU directives covered are 2014/35/EU low voltage, 2014/30/EU electromagnetic compatibility, and 2014/34/EU ATEX, which is the paperwork set a turbine skid build typically asks for at the gate review. ## Sourcing posture","metaTitle":"BMXETM0200H Modicon X80 frequency module, 2 ch, 1 ms","metaDescription":"Schneider BMXETM0200H Modicon X80 frequency module, 2 channels, 1 ms cycle, Class I Div 2, conformal coated. Sourced to order against an RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Standards":"IEC 61131-2 IEC 61010-2-201 UL 61010-2-201 CSA C22.2 No 61010-2-201 IACS E10 IEC 61000-6-5, interface type 1 and type 2 IEC 61850-3, location G IEC 60079-0","Cycle time":"1 ms","Directives":"2014/35/EU - low voltage directive 2014/30/EU - electromagnetic compatibility 2014/34/EU - ATEX directive","Input type":"High speed","Output type":"Reflex digital output","Overlap time":"0.2 ms","Input voltage":"24 V DC 100 V AC","Module format":"Standard","Output voltage":"24 V DC","Input frequency":"0...500 kHz","lifecycle_stage":"current","Number of inputs":"2 (MPU) 2 (APU)","Range of product":"Modicon X80","Isolation voltage":"1400 V DC for 1 min field/bus or ground 1000 V DC for 1 min differential interfaces 1000 V DC for 1 min input/output","Number of outputs":"2","Relative humidity":"10...95 % without condensation","Device application":"Speed and frequency control","Function available":"Compare","Number of channels":"2","Current consumption":"<= 30 mA at 24 V DC sensor","Input compatibility":"19.2...30 V incremental encoder active pick-up sensor, 10...30 V totem pole magnetic pick-up sensor","Product destination":"Turbo machine","Type of measurement":"Frequency","Input voltage limits":"19.2...30 V at 60 °C 26.4 V at 70 °C","Maximum load current":"1 A per module 0.5 A per output","Maximum voltage drop":"<3 V at state 1","Protective treatment":"Conformal coating","Discrete output logic":"Positive logic (source)","Electrical connection":"Connector with 28 pins","Output voltage limits":"19.2...30 V","IP degree of protection":"IP20","Maximum leakage current":"0.1 mA at state 0","Product or component type":"Frequency module","Output overload protection":"Integrated","Voltage state 0 guaranteed":"< 0.3 V","Voltage state 1 guaranteed":"MPU: 0.3...100 V AC APU: 2.5...30 V DC","Environmental characteristic":"Gas resistant class Gx conforming to ISA S71.04 Gas resistant class 3C4 conforming to IEC 60721-3-3 Dust resistant class 3S4 conforming to IEC 60721-3-3 Sand resistant class 3S4 conforming to IEC 60721-3-3 Salt resistant level 2 conforming to IEC 68252 Mold growth resistant class 3B2 conforming to IEC 60721-3-3 Fungal spore resistant class 3B2 conforming to IEC 60721-3-3 Hazardous location class I division 2","Output short-circuit protection":"1.5 A integrated","Ambient air temperature for operation":"-25...70 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$318.77 – $729.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/bf9325198548ee3e1198216801026cd0.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/BMXETM0200H/alternatives.json"},"ai":{"faq":[{"question":"What standards is BMXETM0200H listed under?","answer":"IEC 61131-2, IEC 61010-2-201, UL 61010-2-201, CSA C22.2 No 61010-2-201, IACS, IEC 61000-6-5 interface type 1 and type 2, IEC 61850-3 location G, and IEC 60079-0."},{"question":"How many inputs and outputs does BMXETM0200H provide?","answer":"Two MPU and two APU high-speed inputs plus two reflex digital outputs on two channels, wired through a 28-pin front connector."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BMXETM0200H","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BMXETM0200H when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}