{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BMXNRP0200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BMXNRP0200","canonicalUrl":"https://aoctrl.com/schneider/BMXNRP0200","factsUrl":"https://aoctrl.com/api/mcp/products/BMXNRP0200","rawCanonicalId":null},"summary":{"shortDescription":"Modicon X80 fiber optic repeater, BMXNRP0200, multimode 1310 nm, 2000 m range, 2 RJ45 + 2 fiber ports, hot-swap capable, IP20.","salesMarkdown":"The Schneider BMXNRP0200 is a fiber optic repeater for the Modicon X80 rack. It bridges two 100BASE-FX multimode fiber segments with an integrated media converter — two RJ45 copper ports and two fiber ports are available on the front panel. Hot-swap support means you can swap it without powering down the backplane. Draws 140 mA typical at 24 V. Multimode 1310 nm optics provide up to 2000 m reach on 50/125 or 62.5/125 fiber. Attenuation is -23.5 to -14 dB for 50/125 µm; receiver sensitivity is -31 dBm. Rise and fall times are 3 ns — keeps signal jitter under control over long runs. IP20 housing, so it stays in a clean panel or cabinet, not out in the plant. Carries CE marking, meets IEC 61010-2-201, IEC 61131-2, UL 61010-2-201, and CSA C22.2 No 61010-2-201. Low-voltage and EMC directives (2014/35/EU, 2014/30/EU) are satisfied. These cover safety and emissions for industrial control equipment — no additional project-level qualification paperwork needed for a standard panel. ## Field note — signal integrity The 3 ns rise time and receiver sensitivity floor of -31 dBm combine to give a clean eye diagram well past 2 km on good splice runs. Multimode 1310 nm is the sweet spot for short-haul plant floor links — single-mode would be overkill. If you see bit errors on a long fiber run, check the attenuation first; the repeater adds negligible jitter. LEDs on the faceplate give link status and activity per port. The red error LED catches power supply faults — handy for diagnosing a dead module during a swap.","metaTitle":"BMXNRP0200 Modicon X80 Fiber Repeater, 2000m","metaDescription":"Active Modicon X80 fiber optic repeater, multimode 1310nm, 2000m range. 2 RJ45 + 2 fiber ports. Hot-swap. CE, UL, CSA. Order to RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Depth":"86 mm","Width":"32 mm","Height":"100 mm","Marking":"CE","Standards":"IEC 61010-2-201 IEC 61131-2 UL 61010-2-201 CSA C22.2 No 61010-2-201","Directives":"2014/35/EU - low voltage directive 2014/30/EU - electromagnetic compatibility","Wavelength":"1310 nm","Attenuation":"-23.5...-14 dB (50/125 µm) -20...-14 dB (62.5/125 µm)","Rated voltage":"24 V","Number of port":"2 RJ45 with 100BASE-TX port Ethernet conforming to IEEE 802.3u 2 fiber optic with 100BASE-FX port Ethernet conforming to IEEE 802.3u","Rise/fall time":"3 ns","lifecycle_stage":"current","Local signalling":"1 LED (green) for power supply status 1 LED (red) for error condition (ERR) 2 LEDs (green) for link status 2 LEDs (green) for fiber port state and activity","Optic fiber type":"Multi mode","Range of product":"Modicon X80","Relative humidity":"0...95 %","Function available":"Hot swap","Operating Distance":"0...2000 m","Operating altitude":"0...4000 m","Current consumption":"140 mA typical 200 mA maximum","Dielectric strength":"1400 V DC between field and bus 500 V DC between channels","Receiver sensitivity":"- 31...- 14 dBm","IP degree of protection":"IP20","Product or component type":"Fibre optic repeater","Ambient air temperature for storage":"-40...70 °C","Ambient air temperature for operation":"0...60 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$330.20 – $670.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/2ab934c7cadef084d122ae9c3902050f.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/BMXNRP0200/alternatives.json"},"ai":{"faq":[{"question":"What are the key optical specs?","answer":"Multimode 1310 nm, 2000 m maximum distance, attenuation -23.5 to -14 dB (50/125 µm) and -20 to -14 dB (62.5/125 µm), receiver sensitivity -31 to -14 dBm."},{"question":"What compliance documentation does this part carry?","answer":"CE marking, UL 61010-2-201, CSA C22.2 No 61010-2-201, IEC 61010-2-201, IEC 61131-2, and EU low-voltage and EMC directives."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BMXNRP0200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BMXNRP0200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}