{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BMXSDO0802","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BMXSDO0802","canonicalUrl":"https://aoctrl.com/schneider/BMXSDO0802","factsUrl":"https://aoctrl.com/api/mcp/products/BMXSDO0802","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Modicon X80, discrete output module, BMXSDO0802, 8 channels, 24 V DC, 0.5 A per channel, solid-state, positive logic, IP20.","salesMarkdown":"The BMXSDO0802 is a Modicon X80 8-channel solid-state source output module rated 24 V DC 0.5 A per channel — a standard current-production spare for an X80 I/O rack. Non-isolated outputs with positive logic; all eight share a common return, so plan your field device grouping accordingly. ## Ratings that affect panel wiring Each channel can sink 0.5 A and the whole module 10 A total. If you need more current on one circuit, paralleling up to two outputs is rated — watch the minimum load impedance of 48 Ω per channel to stay within limits. Short-circuit protection uses a 2 A external fuse, so keep one in the panel BOM. Overload is handled by an electronic circuit breaker tripping between 1.5 and 2 times rated current per channel. Reverse polarity and overvoltage are covered by on-board diodes. Switching is fast enough for most discrete loads: turn-on/off within 1.2 ms. Off-state leakage stays under 0.5 mA, so sensitive loads won't creep. The module draws 264 mA from the 3.3 V backplane and 15 mA from 24 V — that's standard for an X80 output slice. ## Sourcing note The BMXSDO0802 is listed as current production. No last-time-buy notices or successor codes on file. If you've got an existing X80 rack, this drops right into the slot and cross-references to the same wiring footprint as earlier BMX DDO modules.","metaTitle":"Schneider BMXSDO0802 Modicon X80 DO Module, 8CH 24V","metaDescription":"BMXSDO0802 Modicon X80 8-channel discrete output module, 24V DC 0.5A per channel, solid-state source outputs. In current production. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Status LED":"1 LED (green) module operating (RUN) 1 LED per channel (green) channel diagnostic 1 LED (red) module error (ERR) 1 LED (red) module I/O","Protection type":"reverse polarity protection overload protection overvoltage protection short-circuit protection","lifecycle_stage":"current","MTBF reliability":"383000 H","Range of product":"Modicon X80","Shock resistance":"15 gn","Relative humidity":"5...95 % at 55 °C without condensation","Operating altitude":"0...2000 m 2000...5000 m with derating factor","Current per channel":"0.625 A","Dielectric strength":"1500 V AC at 50/60 Hz 1 minute, output/ground 1500 V AC at 50/60 Hz 1 minute, output/internal logic","Switching frequency":"0.5/LI² Hz","Discrete output type":"Solid state Not isolated","Load impedance ohmic":">= 48 Ohm","Maximum voltage drop":"10 MOhm 500 V DC","Output compatibility":"Not IEC 61131-2 DC input IEC 61131-2 type 3 DC input","Protective treatment":"Conformal coating","Vibration resistance":"3 gn","Discrete output logic":"Positive","Maximum tungsten load":"6 W","Discrete output number":"8 conforming to IEC 61131-2","Paralleling of outputs":"Yes : 2 maximum","Power dissipation in W":"4.4 W","Discrete output current":"0.5 A","Discrete output voltage":"24 V 19...30 V DC","IP degree of protection":"IP20","Maximum leakage current":"0.5 mA at state 0","Response time on output":"1.2 ms","Product or component type":"Discrete output module","Maximum current per module":"10 A","Output overload protection":"With current limiter With electronic circuit breaker 1.5 In < Id < 2 In","Reverse polarity protection":"Reverse mounted diode","Typical current consumption":"264 mA at 3.3 V DC 15 mA at 24 V","Voltage detection threshold":"< 14 V DC sensor fault > 18 V DC sensor OK","Environmental characteristic":"Gas resistant class Gx Gas resistant class 3C4 Dust resistant class 3S4 Sand resistant class 3S4 Salt resistant level 2 Mold growth resistant class 3B2 Fungal spore resistant class 3B2","Output overvoltage protection":"With transil diode","Output short-circuit protection":"With 2 A external fuse","Ambient air temperature for storage":"-40...85 °C","Ambient air temperature for operation":"-25...60 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$449.58","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/562223d1acdfa7e13b1439da8d6e5766.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/BMXSDO0802/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BMXSDO0802","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BMXSDO0802 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}