{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"BMXXBP0400H","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"BMXXBP0400H","canonicalUrl":"https://aoctrl.com/schneider/BMXXBP0400H","factsUrl":"https://aoctrl.com/api/mcp/products/BMXXBP0400H","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Modicon X80 ruggedized backplane, BMXXBP0400H, 4 bus X slots, IP20, conformal coating, active lifecycle.","salesMarkdown":"## At a glance: what this backplane does The Modicon X80 BMXXBP0400H is a 4-slot ruggedized backplane — think of it as the spine for your X80 I/O rack, carrying power and bus signals between modules in harsh environments. It draws only 1.12 W from the rack supply, which is good to know when you're budgeting the power budget for a cabinet full of cards. The backplane accepts a single expansion connector (XBE) for linking additional racks when you need more than four slots. ## Where this part earns its keep This is an active part — no phase-out or last-time-buy drama. The lifecycle status shows it's current, so you can quote it into a BOM with confidence. It's designed for severe environments: conformal coating protects against moisture and contaminants, and the operating range goes from -25 to 70 °C. Standards compliance includes EN/IEC 61131-2, UL 61010-2-201, CSA, ATEX directive (2014/34/EU), and even ISA S71.04 gas resistance Gx. You also get IEC 60721-3-3 class 3C4 for corrosive gases, 3S4 for dust and sand, plus salt and mold resistance. Safe for Class I Division 2 hazardous locations. ## Mounting and mechanical notes Dimensions: 242.4 mm wide, 103.7 mm tall, and only 19 mm deep — so it doesn't steal much cabinet space behind the panel. That 19 mm depth is the deepest point; the connectors sit within that. When you're laying out the subpanel, leave a little clearance above and below for the DIN rail clips if you use them. IP20 rated; use inside a closed cabinet. Relative humidity 10–95% without condensation.","metaTitle":"Schneider BMXXBP0400H Modicon X80 4-Slot Backplane, Active","metaDescription":"Active Modicon X80 4-slot ruggedized backplane for severe environments. Conformal coated, -25 to 70°C, IP20. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Depth":"19 mm","Width":"242.4 mm","Height":"103.7 mm","Standards":"EN/IEC 61131-2 EN/IEC 61010-2-201 UL 61010-2-201 CSA C22.2 No 61010-2-201 IACS E10 EN/IEC 61000-6-5, interface type 1 and type 2 EN/IEC 61850-3, location G EN/IEC 60079-0","Directives":"2014/35/EU - low voltage directive 2014/30/EU - electromagnetic compatibility 2014/34/EU - ATEX directive","Fixing mode":"By 4 M4/M5/M6 screws, mounting on panel By 4 M4/M5/M6 screws, mounting on mounting plate By clips, mounting on 35 mm symmetrical DIN rail","Number of slots":"4 bus X","lifecycle_stage":"current","Range of product":"Modicon X80","Relative humidity":"10...95 % without condensation","Protective treatment":"Conformal coating","Electrical connection":"1 connector (XBE) expansion module","Power consumption in W":"1.12 W","IP degree of protection":"IP20","Product or component type":"Ruggedized backplane","Environmental characteristic":"Gas resistant class Gx conforming to ISA S71.04 Gas resistant class 3C4 conforming to IEC 60721-3-3 Dust resistant class 3S4 conforming to IEC 60721-3-3 Sand resistant class 3S4 conforming to IEC 60721-3-3 Salt resistant level 2 conforming to IEC 68252 Mold growth resistant class 3B2 conforming to IEC 60721-3-3 Fungal spore resistant class 3B2 conforming to IEC 60721-3-3 Hazardous location class I division 2","Product specific application":"For severe environments","Ambient air temperature for operation":"-25...70 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$153.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/bbf348e336a4c7ff543603241fd10919.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/BMXXBP0400H/alternatives.json"},"ai":{"faq":[{"question":"What compliance documentation does this backplane meet?","answer":"It's certified to EN/IEC 61131-2, EN/IEC 61010-2-201, UL 61010-2-201, CSA C22.2 No 61010-2-201, and IACS. It also meets the EN/IEC 61850-3 standard for substation environments, ATEX directive for explosive atmospheres, and has gas, dust, sand, salt, and mold resistance per IEC 60721-3-3. The conformal coating is standard."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/BMXXBP0400H","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/BMXXBP0400H when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}