{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"CAD32AB7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"CAD32AB7","canonicalUrl":"https://aoctrl.com/schneider/CAD32AB7","factsUrl":"https://aoctrl.com/api/mcp/products/CAD32AB7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys Deca control relay, CAD32AB7, 3NO+2NC, ≤690V, 24V AC standard coil, snap-in terminals.","salesMarkdown":"The CAD32AB7 is a TeSys Deca control relay from Schneider Electric, built for switching control circuits in industrial panels. Its contact complement is 3 normally-open plus 2 normally-closed poles, rated for operational voltages up to 690 V. The utilisation categories tell you what loads this relay can switch reliably: AC-15 for solenoid valves and electromagnetic clutches (inductive loads above 72 VA), AC-14 for contactor coils (inductive loads up to 72 VA), and DC-13 for solenoids and clutches on DC control circuits. The 24 V AC coil draws a sealed current that stays within the PLC output card's per-channel rating, provided the card is rated for AC pilot duty — verify the inrush, not just the hold-in, against the output's maximum peak current. The operating temperature range is -40 to 140 °F (-40 to 60 °C), with derating permitted up to 158 °F (70 °C). Storage range is -76 to 176 °F (-60 to 80 °C), which governs shipping and site storage, not running conditions. This is a dry-location control relay, not a contactor for motor power switching. The CAD32AB7 carries compliance with EN/IEC 60947-5-1, UL 60947-5-1, CSA C22.2 No 60947-5-1, GB/T 14048.5, and JIS C8201-5-1 — the full set of control-circuit device standards for North America, Europe, China, and Japan. That means the part is accepted in panels destined for UL-listed machinery, IEC-nameplate export gear, and CCC-marked equipment without a separate approval hunt. ## Mechanical and environmental robustness The relay withstands 10 Gn shock for 11 ms in the open state and 15 Gn in the closed state, per IEC 60068-2-27. Vibration resistance is 2 Gn from 5 to 300 Hz when open, 4 Gn when closed. That puts it into the range for installation on panels mounted to rotating machinery or near reciprocating compressors, provided the mounting rail is braced against resonance.","metaTitle":"Schneider Electric CAD32AB7 TeSys Deca Control Relay, 3NO+2N","metaDescription":"Control relay CAD32AB7, TeSys Deca, 3NO+2NC, ≤690V, 24V AC coil, snap-in terminals. Active production. UL/CSA/IEC/GB/JIS standards. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"3.7 in (93 mm)","Range":"TeSys","Width":"1.8 in (45 mm)","title":"CAD32AB7","Height":"4.2 in (107 mm)","Category":"US10I1222371","Standards":"EN/IEC 60947-5-1 UL 60947-5-1 CSA C22.2 No 60947-5-1 GB/T 14048.5 JIS C8201-5-1","description":"Control relay, TeSys Deca, 3NO+2NC, <=690V, 24V AC standard coil, snap-in terminals","Product name":"TeSys CAD","lifecycle_stage":"current","Device short name":"CAD","Operating altitude":"0...9842.52 ft (0...3000 m)","Protective treatment":"TH IEC 60068","Utilisation category":"AC-15 AC-14 DC-13","Contactor application":"Control circuit","Mechanical robustness":"Shocks control relay open10 Gn for 11 ms IEC 60068-2-27 Shocks control relay closed15 Gn for 11 ms IEC 60068-2-27 Vibrations control relay open2 Gn, 5...300 Hz IEC 60068-2-6 Vibrations control relay closed4 Gn, 5...300 Hz IEC 60068-2-6","Nbr. of units in pkg.":"1","IP degree of protection":"IP2X front face VDE 0106","Pole contact composition":"3 NO + 2 NC","Product or Component Type":"Control relay","[Ue] rated operational voltage":"10 MOhm","Ambient Air Temperature for Storage":"-76...176 °F (-60...80 °C)","Ambient air temperature for operation":"-40...140 °F (-40...60 °C) 140...158 °F (60...70 °C) with derating"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$83.28","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/ab9fe3fa9b5cf033f05e646e28563acd.pdf","sourceUrl":"https://www.se.com/us/en/product/CAD32AB7/control-relay-tesys-deca-3no+2nc-690v-24v-ac-standard-coil-snapin-terminals/"},"ai":{"faq":[{"question":"What standards does CAD32AB7 comply with?","answer":"It complies with EN/IEC 60947-5-1, UL 60947-5-1, CSA C22.2 No 60947-5-1, GB/T 14048.5, and JIS C8201-5-1. That covers control-circuit device requirements for Europe, North America, China, and Japan."},{"question":"What is the contact configuration of CAD32AB7?","answer":"The relay has 3 normally-open and 2 normally-closed poles (3 NO + 2 NC)."},{"question":"What coil voltage does CAD32AB7 use?","answer":"The coil is rated for 24 V AC standard."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/CAD32AB7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/CAD32AB7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}