{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"CAD32AG7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"CAD32AG7","canonicalUrl":"https://aoctrl.com/schneider/CAD32AG7","factsUrl":"https://aoctrl.com/api/mcp/products/CAD32AG7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys Deca control relay, CAD32AG7, 3NO+2NC, ≤690V, 120V AC standard coil, snap-in terminals.","salesMarkdown":"The CAD32AG7 is a TeSys Deca control relay from Schneider Electric, built for switching control circuits in industrial panels. It carries 3 normally-open and 2 normally-closed contacts, rated for operational voltages up to 690 V, with a 120 V AC standard coil. The snap-in terminal design speeds panel wiring — no screwdriver needed for the control wiring side. Rated for utilisation categories AC-15, AC-14, and DC-13 per EN/IEC 60947-5-1, so it handles solenoid loads, electromagnetic clutches, and contactor coils — the typical control-circuit inductive loads you find in a motor starter or valve manifold cabinet. The same standard set covers UL 60947-5-1, CSA C22.2 No 60947-5-1, GB/T 14048.5, and JIS C8201-5-1, which means it passes for panels destined for North America, China, or Japan without a second component review. The relay body measures 1.8 in wide by 4.2 in tall by 3.7 in deep (45 x 107 x 93 mm), which is the standard TeSys Deca footprint — it clips onto a 35 mm DIN rail and occupies one 45 mm-wide module position. Front-face protection is IP2X per VDE 0106, meaning finger-safe from the front once installed, but the sides and back rely on the enclosure for touch protection. Operating temperature range is -40 to 140 °F (-40 to 60 °C) with derating allowed up to 158 °F (70 °C). Storage range extends from -76 to 176 °F (-60 to 80 °C). Altitude rating goes to 9842 ft (3000 m) without derating. ## Mechanical endurance and sourcing posture Mechanical robustness specs: the relay withstands 10 Gn shocks for 11 ms in the open position and 15 Gn for 11 ms closed, per IEC 60068-2-27. Vibration resistance is 2 Gn from 5 to 300 Hz open, 4 Gn closed per IEC 60068-2-6. These numbers matter if the panel is mounted on a machine frame or near a large reciprocating compressor — the relay won't chatter or drop out under those conditions.","metaTitle":"Schneider Electric CAD32AG7 TeSys Deca Control Relay, 3NO+2N","metaDescription":"Schneider Electric CAD32AG7 TeSys Deca control relay. 3NO+2NC contacts, 120V AC standard coil, snap-in terminals. Rated to 690V, EN/IEC 60947-5-1. Active production.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"3.7 in (93 mm)","Range":"TeSys","Width":"1.8 in (45 mm)","Height":"4.2 in (107 mm)","Category":"US10I1222371","Standards":"EN/IEC 60947-5-1 UL 60947-5-1 CSA C22.2 No 60947-5-1 GB/T 14048.5 JIS C8201-5-1","Product name":"TeSys CAD","lifecycle_stage":"current","Device short name":"CAD","Operating altitude":"0...9842.52 ft (0...3000 m)","Protective treatment":"TH IEC 60068","Utilisation category":"AC-15 AC-14 DC-13","Contactor application":"Control circuit","Mechanical robustness":"Shocks control relay open10 Gn for 11 ms IEC 60068-2-27 Shocks control relay closed15 Gn for 11 ms IEC 60068-2-27 Vibrations control relay open2 Gn, 5...300 Hz IEC 60068-2-6 Vibrations control relay closed4 Gn, 5...300 Hz IEC 60068-2-6","Nbr. of units in pkg.":"1","IP degree of protection":"IP2X front face VDE 0106","Pole contact composition":"3 NO + 2 NC","Product or Component Type":"Control relay","[Ue] rated operational voltage":"10 MOhm","Ambient Air Temperature for Storage":"-76...176 °F (-60...80 °C)","Ambient air temperature for operation":"-40...140 °F (-40...60 °C) 140...158 °F (60...70 °C) with derating"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$83.28","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/546de3ecaebeb3ade70e401c49116ce8.pdf","sourceUrl":"https://www.se.com/be/en/product/CAD32AG7/control-relay-tesys-deca-3no+2nc-690v-120v-ac-standard-coil-snapin-terminals/","alternativesUrl":"https://aoctrl.com/api/mcp/products/CAD32AG7/alternatives.json"},"ai":{"faq":[{"question":"What standards does the CAD32AG7 comply with?","answer":"It complies with EN/IEC 60947-5-1, UL 60947-5-1, CSA C22.2 No 60947-5-1, GB/T 14048.5, and JIS C8201-5-1. This covers control circuit switching devices for most global panel certifications."},{"question":"What is the contact configuration on the CAD32AG7?","answer":"3 normally-open and 2 normally-closed poles. The coil is 120 V AC standard."},{"question":"What utilisation categories does it support?","answer":"AC-15 (solenoid control), AC-14 (small electromagnetic loads), and DC-13 (DC solenoids and clutches). These are the standard categories for control relays per IEC 60947-5-1."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/CAD32AG7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/CAD32AG7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}