{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"CAD32AN7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"CAD32AN7","canonicalUrl":"https://aoctrl.com/schneider/CAD32AN7","factsUrl":"https://aoctrl.com/api/mcp/products/CAD32AN7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys Deca control relay, CAD32AN7, 3NO+2NC, <=690V, 415V AC standard coil, snap-in terminals.","salesMarkdown":"It's built for control-circuit switching, not motor starting — the utilisation categories AC-15, AC-14, and DC-13 tell you it's rated for solenoid, electromagnetic, and resistive loads typical in PLC output isolation, valve control, and interposing relay panels. The 415 V AC standard coil on this variant pulls straight from the line-to-neutral or phase-to-phase control transformer without a separate DC supply. Snap-in terminals clip onto a DIN rail with captive wiring terminals. Dimensions are 45 mm wide, 107 mm tall, 93 mm deep. The IP2X front face protection (conforming to VDE 0106) means finger-safe from the front but not sealed. Operating temperature spans -40 to 60 °C, with derating allowed up to 70 °C. Storage range is -60 to 80 °C. Altitude is rated to 3000 m without derating — fine for most industrial sites outside high-mountain installations. The TH protective treatment (conforming to IEC 60068) adds tropicalisation for humid or condensation-prone environments. Mechanical robustness is specified: shocks up to 10 Gn for 11 ms (relay open) and 15 Gn (relay closed), vibrations at 2 Gn open and 4 Gn closed across 5-300 Hz. That's enough for most conveyor, pump, and compressor applications but not extreme off-road or marine deck mounting without additional isolation. The CAD32AN7 carries approvals under EN/IEC 60947-5-1, UL 60947-5-1, CSA C22.2 No 60947-5-1, GB/T 14048.5, and JIS C8201-5-1. No separate marine or ATEX listing in the evidence.","metaTitle":"Schneider TeSys CAD32AN7 Control Relay, 3NO+2NC, 415V Coil","metaDescription":"Schneider Electric TeSys CAD32AN7 control relay, 3NO+2NC contacts, 415V AC 50/60Hz coil, snap-in terminals. Active production. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"93 mm","Range":"TeSys","Width":"45 mm","title":"CAD32AN7","Height":"107 mm","Standards":"EN/IEC 60947-5-1 UL 60947-5-1 CSA C22.2 No 60947-5-1 GB/T 14048.5 JIS C8201-5-1","description":"Control relay, TeSys Deca, 3NO+2NC, <=690V, 415V AC standard coil, snap-in terminals","Product name":"TeSys CAD","lifecycle_stage":"current","Device short name":"CAD","Operating altitude":"0...3000 m","Protective treatment":"TH conforming to IEC 60068","Utilisation category":"AC-15 AC-14 DC-13","Contactor application":"Control circuit","Mechanical robustness":"Shocks control relay open: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks control relay closed: 15 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations control relay open: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations control relay closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6","IP degree of protection":"IP2X front face conforming to VDE 0106","Pole contact composition":"3 NO + 2 NC","Product or component type":"Control relay","[Ue] rated operational voltage":"10 MOhm","Ambient air temperature for storage":"-60...80 °C","Ambient air temperature for operation":"-40...60 °C 60...70 °C with derating"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/89dced36a5e837682d9eef7af1704c92.pdf","sourceUrl":"https://www.se.com/be/en/product/CAD32AN7/control-relay-tesys-deca-3no+2nc-690v-415v-ac-standard-coil-snapin-terminals/"},"ai":{"faq":[{"question":"What are the key ratings for CAD32AN7?","answer":"It's a 3 NO + 2 NC control relay rated for utilisation categories AC-15, AC-14, and DC-13, with a 415 V AC coil. Operating temperature is -40 to 60 °C (derated to 70 °C), and it's approved to IEC/EN 60947-5-1, UL 60947-5-1, CSA, GB/T, and JIS standards."},{"question":"What compliance documentation does Schneider provide for CAD32AN7?","answer":"The relay is certified to EN/IEC 60947-5-1, UL 60947-5-1, CSA C22.2 No 60947-5-1, GB/T 14048.5, and JIS C8201-5-1. Protective treatment is TH conforming to IEC 60068 for tropical environments."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/CAD32AN7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/CAD32AN7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}