{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"CAD50AP7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"CAD50AP7","canonicalUrl":"https://aoctrl.com/schneider/CAD50AP7","factsUrl":"https://aoctrl.com/api/mcp/products/CAD50AP7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys CAD, control relay, 5NO, <=690V, 230V AC standard coil, snap-in terminals.","salesMarkdown":"It is a control-circuit relay — meaning it switches pilot devices, contactor coils, solenoid valves, and signal lamps in a panel, not motor power directly. Rated for utilisation categories AC-15 (inductive loads above 72 VA), AC-14 (solenoid loads below 72 VA), and DC-13 (solenoid loads with parallel diodes), it covers the typical control-voltage switching duties inside a 690 V line. The 5 NO contact arrangement gives you five independent make contacts on a single relay body — useful for spreading a start signal across multiple starters or PLC inputs. The operating temperature range of -40 to 60 °C (with derating up to 70 °C) and storage range of -60 to 80 °C cover most indoor industrial environments, including unheated warehouses. Mechanical robustness is specified for shock and vibration: the relay stays closed through 15 Gn shocks (11 ms) and open through 10 Gn, and it withstands vibration of 4 Gn closed and 2 Gn open across 5–300 Hz. This means it holds its state under moderate machine vibration — think conveyor drives or pump skids — without chatter. The altitude rating of 0–3000 m covers most installations outside high-altitude mining or mountain-top sites. The CAD50AP7 carries compliance with EN/IEC 60947-5-1, UL 60947-5-1, CSA C22.2 No 60947-5-1, GB/T 14048.5, and JIS C8201-5-1 — the core control-circuit device standards for Europe, North America, China, and Japan. The TH protective treatment per IEC 60068 confirms it is tropicalized against humidity and corrosion for use in warm, damp climates.","metaTitle":"Schneider TeSys CAD50AP7 Control Relay, 5NO, 230V AC","metaDescription":"Schneider Electric TeSys CAD50AP7 control relay, 5 normally open contacts, 230V AC standard coil, snap-in terminals. Rated for AC-15/DC-13 control circuits. Active production. Sour","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Motor Control Accessories"],"specifications":{"Depth":"93 mm","Range":"TeSys","Width":"45 mm","title":"CAD50AP7","Height":"107 mm","Standards":"EN/IEC 60947-5-1 UL 60947-5-1 CSA C22.2 No 60947-5-1 GB/T 14048.5 JIS C8201-5-1","description":"Control relay, TeSys Deca, 5NO, <=690V, 230V AC standard coil, snap-in terminals","Product name":"TeSys CAD","lifecycle_stage":"current","Device short name":"CAD","Operating altitude":"0...3000 m","Protective treatment":"TH conforming to IEC 60068","Utilisation category":"AC-15 AC-14 DC-13","Contactor application":"Control circuit","Mechanical robustness":"Shocks control relay open: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks control relay closed: 15 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations control relay open: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations control relay closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6","IP degree of protection":"IP2X front face conforming to VDE 0106","Pole contact composition":"5 NO","Product or component type":"Control relay","[Ue] rated operational voltage":"10 MOhm","Ambient air temperature for storage":"-60...80 °C","Ambient air temperature for operation":"-40...60 °C 60...70 °C with derating"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/8a82184bfadac39d2226d3effcb2810c.pdf","sourceUrl":"https://www.se.com/be/en/product/CAD50AP7/control-relay-tesys-deca-5no-690v-230v-ac-standard-coil-snapin-terminals/"},"ai":{"faq":[{"question":"What are the key ratings of the CAD50AP7?","answer":"The CAD50AP7 is a control relay with 5 normally open (5 NO) contacts, a 230 V AC standard coil, and a rated operational voltage up to 690 V. It is rated for utilisation categories AC-15, AC-14, and DC-13. The operating temperature range is -40 to 60 °C (with derating up to 70 °C), and it carries IP2X front-face protection."},{"question":"What standards does the CAD50AP7 comply with?","answer":"The CAD50AP7 complies with EN/IEC 60947-5-1, UL 60947-5-1, CSA C22.2 No 60947-5-1, GB/T 14048.5, and JIS C8201-5-1. It also carries TH protective treatment conforming to IEC 60068 for tropicalized environments."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/CAD50AP7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/CAD50AP7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}