{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"CAD50ASL","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"CAD50ASL","canonicalUrl":"https://aoctrl.com/schneider/CAD50ASL","factsUrl":"https://aoctrl.com/api/mcp/products/CAD50ASL","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys Deca control relay, CAD50ASL, 5NO, <=690V, 72V DC low consumption coil, snap-in terminals.","salesMarkdown":"The CAD50ASL is a TeSys Deca control relay from Schneider Electric, built for switching loads in control circuits. It carries five normally open (5 NO) pole contacts and a 72 V DC low-consumption coil, rated for operational voltages up to 690 V. The utilisation categories — AC-15, AC-14, and DC-13 — define its switching capability: AC-15 covers solenoid and electromagnetic loads above 72 VA, AC-14 handles smaller solenoids below 72 VA, and DC-13 applies to electromagnets with parallel diodes. This means the relay is suited for PLC output isolation, contactor coil switching, and general signal-level control in panels where the coil draw stays within the DC-13 curve. The front face carries an IP2X degree of protection per VDE 0106, meaning it resists finger contact — adequate for enclosed panel mounting but not for exposed or washdown zones. Operating temperature spans -40 to 60 °C, with derating required above 60 °C up to 70 °C; storage range is -60 to 80 °C. Altitude tolerance goes to 3000 m without derating, which covers most control cabinets outside high-altitude installations. ## Mechanical robustness for the panel The relay is rated for shock and vibration per IEC 60068-2-27 and IEC 60068-2-6. It withstands 10 Gn for 11 ms in the open position and 15 Gn for 11 ms closed, with vibration resistance of 2 Gn (5–300 Hz) open and 4 Gn closed. This makes it suitable for mounting on panels near moderate industrial vibration sources like contactors or small motors, though it is not rated for direct machine mounting on high-vibration equipment.","metaTitle":"Schneider Electric CAD50ASL TeSys Deca Control Relay, 5NO, 7","metaDescription":"Active-production control relay CAD50ASL from the TeSys Deca range. 5 normally open contacts, 72 V DC low-consumption coil, rated for AC-15/DC-13 control circuits. Sourced to order","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Motor Control Accessories"],"specifications":{"Depth":"93 mm","Range":"TeSys","Width":"45 mm","Height":"107 mm","Standards":"EN/IEC 60947-5-1 UL 60947-5-1 CSA C22.2 No 60947-5-1 GB/T 14048.5 JIS C8201-5-1","Product name":"TeSys CAD","lifecycle_stage":"current","Device short name":"CAD","Operating altitude":"0...3000 m","Protective treatment":"TH conforming to IEC 60068","Utilisation category":"AC-15 AC-14 DC-13","Contactor application":"Control circuit","Mechanical robustness":"Shocks control relay open: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks control relay closed: 15 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations control relay open: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations control relay closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6","IP degree of protection":"IP2X front face conforming to VDE 0106","Pole contact composition":"5 NO","Product or component type":"Control relay","[Ue] rated operational voltage":"10 MOhm","Ambient air temperature for storage":"-60...80 °C","Ambient air temperature for operation":"-40...60 °C 60...70 °C with derating"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/be/en/product/CAD50ASL/control-relay-tesys-deca-5no-690v-72v-dc-low-consumption-coil-snapin-terminals/","alternativesUrl":"https://aoctrl.com/api/mcp/products/CAD50ASL/alternatives.json"},"ai":{"faq":[{"question":"What standards does the CAD50ASL comply with?","answer":"It complies with EN/IEC 60947-5-1, UL 60947-5-1, CSA C22.2 No 60947-5-1, GB/T 14048.5, and JIS C8201-5-1, covering control circuit switching devices."},{"question":"What is the CAD50ASL's contact configuration?","answer":"It has five normally open (5 NO) contacts."},{"question":"What is the operating temperature range for the CAD50ASL?","answer":"It operates from -40 to 60 °C, with derating required between 60 and 70 °C."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/CAD50ASL","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/CAD50ASL when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}