{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"CAD50AW7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"CAD50AW7","canonicalUrl":"https://aoctrl.com/schneider/CAD50AW7","factsUrl":"https://aoctrl.com/api/mcp/products/CAD50AW7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys Deca CAD50AW7 control relay, 5NO, ≤690 V, 277 V AC standard coil, snap-in terminals, 93 mm depth.","salesMarkdown":"The CAD50AW7 is a TeSys Deca control relay from Schneider Electric's TeSys range, built for switching control circuits in industrial panels. It carries 5 normally-open (NO) poles and is rated for utilisation categories AC-15, AC-14, and DC-13 per EN/IEC 60947-5-1 — meaning it handles solenoid and electromagnetic loads common in contactor coils, relays, and small valve actuators. The 5 NO contact arrangement is typical for extending control outputs in a motor starter or safety circuit without adding a second relay. The utilisation category tells you the load type this relay is certified to switch. AC-15 covers inductive loads above 72 VA (contactor coils, solenoid valves); AC-14 covers electromagnetic loads below 72 VA; DC-13 covers solenoids and contactors on DC control circuits. If your BOM calls for switching a 277 V AC contactor coil, the 277 V AC standard coil on this unit matches directly — no separate coil voltage variant to order. The 5 NO pole count gives you five independent switching channels in one 45 mm wide package, saving DIN-rail space compared to stacking individual relays. Physical fit: 93 mm depth, 45 mm width, 107 mm height. That 93 mm depth is the key dimension for enclosure clearance — most 120 mm deep enclosures leave 27 mm for wiring behind the relay. The snap-in terminals (listed as part of the description) mean the relay clips directly onto the DIN rail without screws, speeding panel assembly and replacement. ## Where it goes — panel integration The IP2X front-face protection (per VDE 0106) means the front is finger-safe — no live parts accessible from the front when the panel door is open. The TH protective treatment (conforming to IEC 60068) adds tropicalisation against humidity and corrosion, which matters for panels in non-conditioned environments or near washdown zones. Operating temperature spans -40 to 60 °C, with derating allowed up to 70 °C — sufficient for most indoor industrial enclosures without forced cooling.","metaTitle":"Schneider CAD50AW7 TeSys Deca Control Relay, 5NO, 690V","metaDescription":"Active-production CAD50AW7 control relay from TeSys Deca range. 5 NO contacts, AC-15/DC-13 utilisation, 93 mm depth, snap-in terminals. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Motor Control Accessories"],"specifications":{"Depth":"93 mm","Range":"TeSys","Width":"45 mm","Height":"107 mm","Standards":"EN/IEC 60947-5-1 UL 60947-5-1 CSA C22.2 No 60947-5-1 GB/T 14048.5 JIS C8201-5-1","Product name":"TeSys CAD","lifecycle_stage":"current","Device short name":"CAD","Operating altitude":"0...3000 m","Protective treatment":"TH conforming to IEC 60068","Utilisation category":"AC-15 AC-14 DC-13","Contactor application":"Control circuit","Mechanical robustness":"Shocks control relay open: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks control relay closed: 15 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations control relay open: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations control relay closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6","IP degree of protection":"IP2X front face conforming to VDE 0106","Pole contact composition":"5 NO","Product or component type":"Control relay","[Ue] rated operational voltage":"10 MOhm","Ambient air temperature for storage":"-60...80 °C","Ambient air temperature for operation":"-40...60 °C 60...70 °C with derating"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/be/en/product/CAD50AW7/control-relay-tesys-deca-5no-690v-277v-ac-standard-coil-snapin-terminals/","alternativesUrl":"https://aoctrl.com/api/mcp/products/CAD50AW7/alternatives.json"},"ai":{"faq":[{"question":"What are the key ratings for CAD50AW7?","answer":"5 NO contacts, utilisation categories AC-15/AC-14/DC-13, rated operational voltage up to 690 V, 277 V AC standard coil, 93 mm depth, 45 mm width, 107 mm height, IP2X front face, operating temperature -40 to 60 °C (derated to 70 °C)."},{"question":"What standards does CAD50AW7 comply with?","answer":"EN/IEC 60947-5-1, UL 60947-5-1, CSA C22.2 No 60947-5-1, GB/T 14048.5, and JIS C8201-5-1."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/CAD50AW7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/CAD50AW7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}