{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"CR1F1504GZ7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"CR1F1504GZ7","canonicalUrl":"https://aoctrl.com/schneider/CR1F1504GZ7","factsUrl":"https://aoctrl.com/api/mcp/products/CR1F1504GZ7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys F magnetic contactor, 4-pole, AC-1 rated 150 A at 40 °C, 127 VDC standard coil, depth 171 mm.","salesMarkdown":"The CR1F1504GZ7 is a TeSys F magnetic contactor from Schneider Electric, part of the TeSys range. It is a 4-pole device (4 NO power poles) rated for AC-1 utilisation category, meaning it is designed for resistive or slightly inductive loads — not motor starting. The control circuit is 127 VDC, with a standard coil that latches between 35 and 40 ms and unlatches between 50 and 100 ms. The 150 A AC-1 rating is the headline figure: this contactor switches resistive loads up to 150 A without derating at 40 °C. The 250 A Ith rating gives headroom for thermal capacity in free air, but the actual switching duty governs the selection. Power dissipation per pole runs 18 W in AC-1 use — plan enclosure ventilation accordingly. Coil consumption is significant on pull-in: 1100 VA AC at 50/60 Hz when latching, dropping to 10 VA DC when unlatching. The control circuit voltage limits are 0.85...1.1 Uc for both latching and unlatching — the 127 VDC coil holds reliably between about 108 V and 140 VDC. Operating time is fast enough for most switching sequences but not for high-speed cycling: maximum operating rate is 120 cycles per minute at 40 °C. AC-1 contactors like this one are typically found in heating, lighting, and distribution panels where the load is resistive or has a low inrush — electric heaters, banks of incandescent lamps, capacitor banks, or transformer primary switching. The 4-pole configuration with all NO contacts suits applications needing four independent switching paths in a single frame. The TeSys F series is a standard panel-mount form factor with a 3-pole footprint extended for the fourth pole.","metaTitle":"Schneider TeSys F CR1F1504GZ7 Magnetic Contactor, 150 A AC-1","metaDescription":"CR1F1504GZ7 TeSys F magnetic contactor, 4-pole, 150 A AC-1 rated operational current, 127 VDC coil. Active production. Sourced to order. Depth 171 mm.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"171 mm","Range":"TeSys","Width":"201.5 mm","title":"CR1F1504GZ7","Height":"301 mm","Coil type":"Standard","description":"contacteur bistable CR1F 4P AC1 440V 250 A bobine 127 V","Product name":"TeSys F","Operating time":"35...40 ms latching 50...100 ms unlatching","lifecycle_stage":"current","Average impedance":"0.45 Ohm - Ith 250 A 50 Hz for control circuit","Device short name":"CR1F","Poles description":"4P","Operating altitude":"3000 m without derating","Operating position":"+/- 5°","Average Consumption":"1100 VA AC 50/60 Hz latching 10 VA AC 400 Hz unlatching 1260 VA AC 400 Hz latching 7.3 VA AC 50/60 Hz unlatching 10 VA DC unlatching 1260 VA DC latching","Protective treatment":"TH","Utilisation category":"AC-1","Mechanical durability":"1000000 cycles","Associated fuse rating":"160 A aM for power circuit 250 A BS88 for power circuit 250 A gG for power circuit","Maximum operating rate":"120 cyc/mn 40 °C","Rated breaking capacity":"1100 A at 600...690 V for power circuit 1200 A at 500 V for power circuit 1500 A at 220...440 V for power circuit 450 A at 1000 V for power circuit","Product or component type":"Magnetic contactor","Irms rated making capacity":"1700 A for power circuit","Power dissipation per pole":"18 W AC-1","[Uc] control circuit voltage":"127 V DC","[Ui] rated insulation voltage":"Control circuit: 1000 V conforming to BS 775 Control circuit: 1000 V conforming to IEC 60158-1 Control circuit: 1000 V conforming to IEC 60947-4 Control circuit: 1500 V conforming to VDE 0110 group C","Control circuit voltage limits":"Latching: 0.85...1.1 Uc Unlatching: 0.85...1.1 Uc","Power Pole Contact Composition":"4 NO","[Ie] rated operational current":"150 A (at <40 °C) AC/DC AC-1 for power circuit","[Ue] rated operational voltage":"Power circuit: 1000 V AC Power circuit: 1000 V DC","Ambient air temperature for operation":"-15...70 °C","[Ith] conventional free air thermal current":"250 A (at 40 °C) for power circuit"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/42f4ea300546f16b45430cdf44d96ac0.pdf","sourceUrl":"https://www.se.com/uk/en/product/CR1F1504GZ7/contacteur-bistable-cr1f-4p-ac1-440v-250-a-bobine-127-v/"},"ai":{"faq":[{"question":"What are its key ratings for a sourcing decision?","answer":"The critical figures for fit are: 150 A rated operational current in AC-1 (resistive load) at 40 °C, a 250 A conventional free-air thermal current, a 127 VDC control coil, and 4 NO power poles. Mechanical durability is rated at 1,000,000 cycles."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/CR1F1504GZ7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/CR1F1504GZ7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}