{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"CR1F1504MZ7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"CR1F1504MZ7","canonicalUrl":"https://aoctrl.com/schneider/CR1F1504MZ7","factsUrl":"https://aoctrl.com/api/mcp/products/CR1F1504MZ7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys F series, CR1F1504MZ7 magnetic latching contactor, 4 NO poles, 220 V DC control, 150 A AC-4 at 440 V, 100 kW at 690 V.","salesMarkdown":"The CR1F1504MZ7 is a TeSys F magnetic latching contactor from Schneider Electric, configured with 4 normally open power poles and a 220 V DC low-consumption control circuit. It is designed for motor control and resistive load switching across utilisation categories AC-1, AC-3, and AC-4. The latching mechanism holds the main contacts closed without continuous coil power — the coil draws 500 W DC only during the 35...40 ms latching pulse, then drops to zero holding current. Unlatching requires a separate 15 W DC pulse lasting 50...100 ms. This makes it suitable for applications where sustained coil power is unavailable or undesirable, such as battery-backed or renewable-energy systems. The rated operational current [Ie] is 150 A in AC-4 duty at 440 V AC, 40 °C ambient — this is the switching current for demanding motor loads with frequent starts and stops. For less severe AC-3 duty (starting/running motors), the conventional free air thermal current [Ith] is 250 A at 40 °C, which sets the continuous current capacity in open mounting. Motor power capability spans 40 kW at 220...230 V AC up to 100 kW at 690 V AC per IEC ratings; UL/CSA horsepower ratings are 50 hp at 240 V and 100 hp at 480 V. The rated insulation voltage [Ui] is 1000 V per IEC 60947-4-1 and BS 775, with an impulse withstand voltage [Uimp] of 8 kV — confirming suitability for 690 V line-to-line systems with adequate clearance. Rated breaking capacity is 1500 A at 440 V, dropping to 450 A at 1000 V, which defines the maximum fault current the contactor can interrupt. Dimensions are 6.7 in (171 mm) depth, 7.9 in (201.5 mm) width, and 6.7 in (170 mm) height. Terminals accept lugs, ring terminals, a 120 mm² connector, or 25 x 3 mm bars. Tightening torque is 159.3 lbf·in (18 N·m). The contactor is panel-mounted, not DIN-rail — plan for dedicated mounting holes and bus-bar connections. Associated fuse rating is 250 A gG or aM at 440 V, or 160 A aM. Mechanical durability is rated at 1 million cycles. Power dissipation per pole is 6 W in AC-3 and 18 W in AC-1, which should be factored into enclosure thermal calculations.","metaTitle":"CR1F1504MZ7 TeSys F Magnetic Latching Contactor, 4P, 220 V D","metaDescription":"CR1F1504MZ7 TeSys F magnetic latching contactor, 4 NO poles, 220 V DC control. Rated 150 A AC-4 at 440 V, 100 kW at 690 V. Current lifecycle stage. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"6.7 in (171 mm)","Range":"TeSys","Width":"7.9 in (201.5 mm)","title":"CR1F1504MZ7","Height":"6.7 in (170 mm)","Category":"22336-CTR,F-LINE,AC,OPEN,NONREV","description":"TeSys F magnetic latching contactor - 4P - 250 A - 220 V DC coil - low consum.","Product name":"TeSys F","Motor power kW":"65 kW at 1000 V AC 50/60 Hz 100 kW at 690 V AC 50/60 Hz 90 kW at 500...660 V AC 50/60 Hz 80 kW at 440 V AC 50/60 Hz 80 kW at 415 V AC 50/60 Hz 75 kW at 380...400 V AC 50/60 Hz 40 kW at 220...230 V AC 50/60 Hz","Operating time":"35...40 ms latching 50...100 ms unlatching","lifecycle_stage":"current","Average impedance":"0.45 mOhm - Ith 250 A 50 Hz","Device short name":"CR1F","Poles description":"4P","Tightening torque":"159.3 lbf.in (18 N.m)","Device Application":"Control","Operating altitude":"9842.52 ft (3000 m) without derating","Average Consumption":"500 W DC latching 15 W DC unlatching","Protective treatment":"TH","Utilisation category":"AC-1 AC-4 AC-3","Contactor application":"Motor control Resistive load","Mechanical durability":"1 Mcycles","Nbr. of units in pkg.":"1","Associated fuse rating":"160 A aM at 250 A BS88 at 250 A gG at <= 440 V","Maximum operating rate":"120 cyc/h 104 °F (40 °C)","Connections - terminals":"lugs-ring terminals 1 0.2 in² (120 mm²) connector 1 0.2 in² (120 mm²) bars 2 25 x 3 mm","Rated breaking capacity":"1500 A at 220...440 V 1200 A at 500 V 450 A at 1000 V 1100 A at 660/690 V","Product or Component Type":"Magnetic latching contactor","motor power HP (UL / CSA)":"125 hp at 575...600 V AC 50/60 Hz for 3 phase motors 100 hp at 460...480 V AC 50/60 Hz for 3 phase motors 50 hp at 220...240 V AC 50/60 Hz for 3 phase motors 40 hp at 200...208 V AC 50/60 Hz for 3 phase motors","Irms rated making capacity":"1700 A","Power dissipation per pole":"6 W AC-3 18 W AC-1","[Uc] control circuit voltage":"220 V DC low consumption","[Ui] rated insulation voltage":"1000 V IEC 60158-1 1000 V IEC 60947-4 1000 V BS 775 1500 V VDE 0110 group C","Control circuit voltage limits":"Latching: 0.85...1.1 Uc Unlatching: 0.85...1.1 Uc","Power Pole Contact Composition":"4 NO","[Ie] rated operational current":"150 A (at 250 A (at 138 A (at <104 °F (40 °C)) at <= 440 V AC AC-4","[Ue] rated operational voltage":"1000 V AC 25...200 Hz","Ambient Air Temperature for Storage":"-76...176 °F (-60...80 °C)","Ambient Air Temperature for Operation":"5...158 °F (-15...70 °C)","[Uimp] rated impulse withstand voltage":"8 kV","[Icw] rated short-time withstand current":"1200 A 104 °F (40 °C) - 1 s 1200 A 104 °F (40 °C) - 5 s 1200 A 104 °F (40 °C) - 10 s 700 A 104 °F (40 °C) - 30 s 600 A 104 °F (40 °C) - 1 min 450 A 104 °F (40 °C) - 3 min 350 A 104 °F (40 °C) - 10 min","[Ith] conventional free air thermal current":"250 A (at 104 °F (40 °C))"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/67ec20132a68028929f011de3b95673c.pdf","sourceUrl":"https://www.se.com/sg/en/product/CR1F1504MZ7/tesys-f-magnetic-latching-contactor-4p-250-a-220-v-dc-coil-low-consum-/"},"ai":{"faq":[{"question":"What are the key ratings for the CR1F1504MZ7?","answer":"Rated operational current is 150 A in AC-4 at 440 V; conventional free air thermal current is 250 A at 40 °C. Motor power reaches 100 kW at 690 V AC. Control voltage is 220 V DC with latching pulse consumption of 500 W DC."},{"question":"What compliance documentation is available for the CR1F1504MZ7?","answer":"The rated insulation voltage complies with IEC 60158-1, IEC 60947-4-1, and BS 775 at 1000 V, and VDE 0110 group C at 1500 V. The impulse withstand voltage is 8 kV. Protective treatment is TH for tropical environments."},{"question":"What are the physical dimensions of the CR1F1504MZ7?","answer":"Depth is 6.7 in (171 mm), width is 7.9 in (201.5 mm), and height is 6.7 in (170 mm)."},{"question":"What is the operating temperature range for the CR1F1504MZ7?","answer":"Operating ambient temperature is -15 to 70 °C. Storage temperature range is -60 to 80 °C."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/CR1F1504MZ7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/CR1F1504MZ7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}