{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"CR1F1504Q7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"CR1F1504Q7","canonicalUrl":"https://aoctrl.com/schneider/CR1F1504Q7","factsUrl":"https://aoctrl.com/api/mcp/products/CR1F1504Q7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys F CR1F1504Q7, magnetic contactor, 4-pole, Ith 250 A, AC-1 150 A at 40 °C, coil 380 V AC 50/60 Hz, latching type.","salesMarkdown":"The Schneider Electric CR1F1504Q7 is a TeSys F magnetic contactor — 4-pole, latching (bistable) type, with a 380 V AC 50/60 Hz control coil. It's rated for AC-1 resistive loads: 250 A conventional free-air thermal current (Ith) at 40 °C, translating to 150 A rated operational current (Ie) in AC-1 duty. The 4 NO power pole configuration handles switching without a neutral pole, common for three-phase resistive banks or distribution switching. This is a latching contactor — the coil draws 1100 VA inrush to latch, then holds at 7.3 VA unlatching (50/60 Hz). The unlatch time runs 50–100 ms, latch time 35–40 ms. That pulse-and-hold profile means the coil is not continuously energized in the latched state; the magnetic circuit holds mechanically. Useful in applications where sustained coil power is undesirable or where a power-loss memory is needed. For motor loads (AC-3), this contactor is not the right choice — the AC-1 rating is the only utilization category listed. The 250 A Ith figure is the thermal current in free air, which governs busbar and cable sizing at the terminals. The 18 W power dissipation per pole at AC-1 means a 4-pole contactor dumps 72 W into the enclosure — factor that into panel ventilation if it's in a sealed cabinet. Breaking capacity is substantial: 1500 A at 220–440 V, 1200 A at 500 V, 1100 A at 600–690 V, and 450 A at 1000 V for the power circuit. Making capacity is 1700 A rms. That's enough for fault clearing on most 400 V distribution panels, but the associated fuse ratings (160 A aM, 250 A gG/BS88) should be observed for short-circuit coordination. Dimensions: 301 mm height, 201.5 mm width, 171 mm depth. This is a panel-mount contactor, not DIN-rail — it bolts to a backplate. The TH protective treatment (tropicalization) means it's coated for humidity and mild corrosive environments. Operating altitude is 3000 m without derating; ambient temperature range is –15 to 70 °C. Mounting position tolerance is ±5° from vertical. Mechanical durability is rated at 1,000,000 cycles. Maximum operating rate is 120 cycles per minute at 40 °C. The control circuit insulation voltage is rated at 1000 V per IEC 60947-4 and BS 775, with 1500 V per VDE 0110 group C. That covers most industrial control panel insulation requirements.","metaTitle":"Schneider Electric CR1F1504Q7 TeSys F Magnetic Contactor, 4P","metaDescription":"Schneider Electric TeSys F CR1F1504Q7 magnetic contactor. 4-pole, 250 A Ith, 150 A AC-1 rated operational current, 380 V AC 50/60 Hz coil. Active production.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"171 mm","Range":"TeSys","Width":"201.5 mm","title":"CR1F1504Q7","Height":"301 mm","Coil type":"Standard","description":"contacteur bistable CR1F 4P AC1 440V 250 A bobine 380 à 400 V","Product name":"TeSys F","Operating time":"35...40 ms latching 50...100 ms unlatching","lifecycle_stage":"current","Average impedance":"0.45 Ohm - Ith 250 A 50 Hz for control circuit","Device short name":"CR1F","Poles description":"4P","Operating altitude":"3000 m without derating","Operating position":"+/- 5°","Average Consumption":"1100 VA AC 50/60 Hz latching 10 VA AC 400 Hz unlatching 1260 VA AC 400 Hz latching 7.3 VA AC 50/60 Hz unlatching 10 VA DC unlatching 1260 VA DC latching","Protective treatment":"TH","Utilisation category":"AC-1","Mechanical durability":"1000000 cycles","Associated fuse rating":"160 A aM for power circuit 250 A BS88 for power circuit 250 A gG for power circuit","Maximum operating rate":"120 cyc/mn 40 °C","Rated breaking capacity":"1100 A at 600...690 V for power circuit 1200 A at 500 V for power circuit 1500 A at 220...440 V for power circuit 450 A at 1000 V for power circuit","Product or component type":"Magnetic contactor","Irms rated making capacity":"1700 A for power circuit","Power dissipation per pole":"18 W AC-1","[Uc] control circuit voltage":"380 V AC 50/60 Hz","[Ui] rated insulation voltage":"Control circuit: 1000 V conforming to BS 775 Control circuit: 1000 V conforming to IEC 60158-1 Control circuit: 1000 V conforming to IEC 60947-4 Control circuit: 1500 V conforming to VDE 0110 group C","Control circuit voltage limits":"Latching: 0.85...1.1 Uc Unlatching: 0.85...1.1 Uc","Power Pole Contact Composition":"4 NO","[Ie] rated operational current":"150 A (at <40 °C) AC/DC AC-1 for power circuit","[Ue] rated operational voltage":"Power circuit: 1000 V AC Power circuit: 1000 V DC","Ambient air temperature for operation":"-15...70 °C","[Ith] conventional free air thermal current":"250 A (at 40 °C) for power circuit"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/157833141d27f5866064dfdaf5864d81.pdf","sourceUrl":"https://www.se.com/uk/en/product/CR1F1504Q7/contacteur-bistable-cr1f-4p-ac1-440v-250-a-bobine-380-à-400-v/"},"ai":{"faq":[{"question":"What are the key ratings I need to know for fit?","answer":"250 A Ith (conventional free-air thermal current) at 40 °C, 150 A rated operational current in AC-1 category, 380 V AC 50/60 Hz control coil. It's a 4-pole latching contactor with 4 NO contacts. Breaking capacity ranges from 1500 A at 220–440 V down to 450 A at 1000 V."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/CR1F1504Q7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/CR1F1504Q7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}