{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"CR1F1504U7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"CR1F1504U7","canonicalUrl":"https://aoctrl.com/schneider/CR1F1504U7","factsUrl":"https://aoctrl.com/api/mcp/products/CR1F1504U7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys F CR1F1504U7, magnetic latching contactor, 4 NO power poles, 240 V AC 50/60 Hz coil, 150 A AC-3 rated operational current, 65 kW at 1000 V AC.","salesMarkdown":"The CR1F1504U7 is a TeSys F magnetic latching contactor from Schneider Electric. Latching means the coil only draws power to change state — it holds the contacts closed magnetically without continuous coil current, which saves power and cuts heat in the panel. This is a key difference from a standard contactor that needs constant coil power to stay pulled in. Rated for motor control and resistive loads across utilisation categories AC-1, AC-3, and AC-4. The headline numbers: 150 A at 440 V in AC-3 (motor switching), and it handles motor power up to 65 kW at 1000 V AC, or 100 kW at 690 V. For UL/CSA applications, it's rated 125 hp at 575-600 V on three-phase motors. The AC-4 rating (inching, plugging, reversing) is 138 A at 440 V — that's the one to watch if you're doing frequent reversing on a conveyor or hoist. The contactor mounts on a panel or a notched AM1-EC DIN rail. Terminal connections accept lugs, ring terminals, bars up to 120 mm², or a 25 x 3 mm bar — gives you options for different cable sizes and lug styles in the field. AC-3 covers starting and running motors, where the contacts make on locked-rotor current and break at running current. If your motor full-load amps are under 150 A, this contactor fits. The AC-1 rating (resistive load) is higher — 250 A at 250 A Ith — so for heaters or lighting banks, you get more headroom. Rated breaking capacity tells you what fault current it can interrupt safely: 1500 A at 440 V, 1100 A at 690 V, and 450 A at 1000 V. That's not the same as SCCR on the whole combination (which depends on the upstream fuse or breaker), but it confirms the contactor itself won't weld shut on a moderate fault. The associated fuse recommendation is 160 A aM or 250 A gG at up to 440 V — match that for coordination. Rated insulation voltage is 1000 V per IEC 60947-4, and the contactor operates up to 3000 m altitude without derating. That covers most industrial installations, including high-altitude plants. The operating temperature range is -15 to 70 °C, storage down to -60 °C — fine for unheated warehouses or shipping in cold climates. Standards compliance is broad: IEC 60947-4, BS 5424, JEM 1038, VDE 0660, and NF C 63-110. That means it's accepted across European, UK, Japanese, and German regulatory frameworks. For North American jobs, the UL/CSA horsepower ratings are listed — 125 hp at 575-600 V — so it's suitable for dual-standard panels shipping internationally.","metaTitle":"CR1F1504U7 TeSys F Magnetic Latching Contactor, 4P, 240V AC","metaDescription":"CR1F1504U7 TeSys F magnetic latching contactor, 4 NO poles, 240V AC coil. Rated 150A AC-3, 65 kW at 1000V. Active production, sourced to order. IEC/UL/CSA.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"6.7 in (171 mm)","Range":"TeSys","Width":"7.9 in (201.5 mm)","title":"CR1F1504U7","Height":"6.7 in (170 mm)","Category":"22336-CTR,F-LINE,AC,OPEN,NONREV","Standards":"NF C 63-110 IEC 60947-4 BS 5424 JEM 1038 VDE 0660","description":"Bistable contactor CR1-F - 4P - AC-1 440V 250 A - coil 240 V","Product name":"TeSys F","Motor power kW":"65 kW at 1000 V AC 50/60 Hz 100 kW at 690 V AC 50/60 Hz 90 kW at 500...660 V AC 50/60 Hz 80 kW at 440 V AC 50/60 Hz 80 kW at 415 V AC 50/60 Hz 75 kW at 380...400 V AC 50/60 Hz 40 kW at 220...230 V AC 50/60 Hz","Operating time":"35...40 ms latching 50...100 ms unlatching","lifecycle_stage":"current","Mounting Support":"Panel mounting Notched AM1-EC rail","Average impedance":"0.45 mOhm - Ith 250 A 50 Hz","Device short name":"CR1F","Poles description":"4P","Tightening torque":"159.3 lbf.in (18 N.m)","Device Application":"Control","Operating altitude":"9842.52 ft (3000 m) without derating","Average Consumption":"1260 VA AC 50...400 Hz latching 10 VA AC 50...400 Hz unlatching 1260 VA DC latching 10 VA DC unlatching","Protective treatment":"TH","Utilisation category":"AC-4 AC-3 AC-1","Contactor application":"Motor control Resistive load","Mechanical durability":"1 Mcycles","Nbr. of units in pkg.":"1","Associated fuse rating":"160 A aM at 250 A BS88 at 250 A gG at <= 440 V for power circuit","Maximum operating rate":"120 cyc/h 131 °F (55 °C)","Connections - terminals":"lugs-ring terminals 1 0.2 in² (120 mm²) connector 1 0.2 in² (120 mm²) bars 2 25 x 3 mm","IP degree of protection":"IP20 front face IEC 60529","Rated breaking capacity":"1500 A at 220...440 V for power circuit 1200 A at 500 V for power circuit 450 A at 1000 V for power circuit 1100 A at 660/690 V for power circuit","Product or Component Type":"Magnetic latching contactor","motor power HP (UL / CSA)":"125 hp at 575...600 V AC 50/60 Hz for 3 phase motors 100 hp at 460...480 V AC 50/60 Hz for 3 phase motors 50 hp at 220...240 V AC 50/60 Hz for 3 phase motors 40 hp at 200...208 V AC 50/60 Hz for 3 phase motors","Irms rated making capacity":"1700 A for power circuit","Power dissipation per pole":"6 W AC-3 18 W AC-1","[Uc] control circuit voltage":"240 V AC 50/60 Hz","[Ui] rated insulation voltage":"1000 V IEC 60158-1 1000 V IEC 60947-4 1000 V BS 775 1500 V VDE 0110 group C","Control circuit voltage limits":"Latching: 0.85...1.1 Uc Unlatching: 0.85...1.1 Uc","Power Pole Contact Composition":"4 NO","[Ie] rated operational current":"150 A (at 250 A (at 138 A (at <104 °F (40 °C)) at <= 440 V AC AC-4","[Ue] rated operational voltage":"1000 V AC 25...200 Hz","Ambient Air Temperature for Storage":"-76...176 °F (-60...80 °C)","Ambient Air Temperature for Operation":"5...158 °F (-15...70 °C)","[Uimp] rated impulse withstand voltage":"8 kV","[Icw] rated short-time withstand current":"1200 A 104 °F (40 °C) - 1 s 1200 A 104 °F (40 °C) - 5 s 1200 A 104 °F (40 °C) - 10 s 700 A 104 °F (40 °C) - 30 s 600 A 104 °F (40 °C) - 1 min 450 A 104 °F (40 °C) - 3 min 350 A 104 °F (40 °C) - 10 min","[Ith] conventional free air thermal current":"250 A (at 104 °F (40 °C)) for power circuit"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/4f65f58168e00e1e9d3f5c76cba6a39e.pdf","sourceUrl":"https://www.se.com/th/en/product/CR1F1504U7/bistable-contactor-cr1f-4p-ac1-440v-250-a-coil-240-v/"},"ai":{"faq":[{"question":"What is the closest alternative to CR1F1504U7 in the TeSys F family?","answer":"Within the TeSys F magnetic latching contactor series, the CR1F series shares the same footprint and coil options. The CR1F1504U7 is a specific variant with a 240 V AC coil and 4 NO poles. A direct alternative would be the same CR1F frame with a different coil voltage if 240 V AC is not available in your panel — for example, a 110 V AC or 24 V DC coil variant. All share the same power pole ratings and mounting."},{"question":"What compliance documentation does Schneider provide for this part?","answer":"The contactor is certified to IEC 60947-4, BS 5424, JEM 1038, VDE 0660, and NF C 63-110. UL and CSA horsepower ratings are published for North American installations. The protective treatment is TH (tropicalized/humid environment). For RoHS and REACH declarations, those are standard Schneider documentation available per lot — the part carries no explicit RoHS/REACH exemption flag in the listing."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/CR1F1504U7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/CR1F1504U7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}