{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"CR1F150L7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"CR1F150L7","canonicalUrl":"https://aoctrl.com/schneider/CR1F150L7","factsUrl":"https://aoctrl.com/api/mcp/products/CR1F150L7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys F magnetic latching contactor, 3P (3 NO), 150 A, 208 V AC/DC coil, obsolete.","salesMarkdown":"The CR1F150L7 is a TeSys F magnetic latching contactor from Schneider Electric, configured as 3-pole normally open (3 NO) and rated for a 208 V AC/DC control circuit. It's designed for motor control and resistive load switching, with utilisation categories covering AC-1, AC-3, and AC-4 duty. The latching mechanism holds the main contacts closed without continuous coil power — the coil draws 1260 VA during the latching pulse and only 10 VA during the unlatching pulse, which cuts heat buildup in the panel. Rated operational current (Ie) is 150 A at AC-4 duty under 440 V, with a maximum of 250 A at AC-1 for resistive loads. Rated breaking capacity reaches 1500 A at 220–440 V, 1200 A at 500 V, and 450 A at 1000 V, which tells you the contactor can clear a fault without welding its own contacts. The rated short-time withstand current (Icw) is 1200 A for up to 10 seconds, giving upstream protection devices time to operate. Operating time is 35–40 ms for latching and 50–100 ms for unlatching — fast enough for most motor-start sequences but not for high-speed jogging. The control circuit voltage limits are 0.85 to 1.1 times Uc for both latching and unlatching, so a 208 V coil will reliably pick up and drop out between about 177 V and 229 V. ## Integration notes The contactor measures 6.7 in deep by 6.4 in wide by 6.7 in tall, so plan for a panel depth of at least 8 in to allow wiring clearance. Connections accept lugs, ring terminals, or bars up to 120 mm² per pole, with a tightening torque of 159.3 lbf·in (18 N·m). The 3-pole NO configuration is straightforward for three-phase motor circuits — just watch the power dissipation: 6 W per pole under AC-3 duty, 18 W per pole under AC-1. That adds up inside a sealed enclosure.","metaTitle":"CR1F150L7 TeSys F Magnetic Latching Contactor, 150 A, 208 V","metaDescription":"Obsolete TeSys F CR1F150L7 magnetic latching contactor, 3P (3 NO), 150 A rated operational current, 208 V AC/DC coil. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"6.7 in (171 mm)","Range":"TeSys","Width":"6.4 in (163.5 mm)","Height":"6.7 in (170 mm)","Category":"22336-CTR,F-LINE,AC,OPEN,NONREV","Product name":"TeSys F","Operating time":"35...40 ms latching 50...100 ms unlatching","lifecycle_stage":"current","Average impedance":"0.45 mOhm - Ith 250 A 50 Hz","Device short name":"CR1F","Poles description":"3P","Tightening torque":"159.3 lbf.in (18 N.m)","Operating altitude":"9842.52 ft (3000 m) without derating","Average Consumption":"1260 VA AC 50...400 Hz latching 10 VA AC 50...400 Hz unlatching 1260 VA DC latching 10 VA DC unlatching","Control circuit type":"AC 50...400 Hz DC standard","Protective treatment":"TC","Utilisation category":"AC-1 AC-4 AC-3","Contactor application":"Motor control Resistive load","Mechanical durability":"1 Mcycles","Nbr. of units in pkg.":"1","Associated fuse rating":"160 A aM at 250 A BS88 at 250 A gG at <= 440 V","Maximum operating rate":"120 cyc/h 104 °F (40 °C)","Connections - terminals":"lugs-ring terminals 1 0.2 in² (120 mm²) connector 1 0.2 in² (120 mm²) bars 2 25 x 3 mm","Rated breaking capacity":"1500 A at 220...440 V 1200 A at 500 V 450 A at 1000 V 1100 A at 660/690 V","Product or Component Type":"Magnetic latching contactor","Irms rated making capacity":"1700 A","Power dissipation per pole":"6 W AC-3 18 W AC-1","[Uc] control circuit voltage":"208 V AC 50...400 Hz 208 V DC","[Ui] rated insulation voltage":"1000 V IEC 60158-1 1000 V IEC 60947-4 1000 V BS 775 1500 V VDE 0110 group C","Control circuit voltage limits":"Latching: 0.85...1.1 Uc Unlatching: 0.85...1.1 Uc","Power Pole Contact Composition":"3 NO","[Ie] rated operational current":"150 A (at 250 A (at 138 A (at <104 °F (40 °C)) at <= 440 V AC AC-4","[Ue] rated operational voltage":"1000 V AC 25...200 Hz","Ambient Air Temperature for Storage":"-76...176 °F (-60...80 °C)","Ambient Air Temperature for Operation":"5...158 °F (-15...70 °C)","[Icw] rated short-time withstand current":"1200 A 104 °F (40 °C) - 1 s 1200 A 104 °F (40 °C) - 5 s 1200 A 104 °F (40 °C) - 10 s 700 A 104 °F (40 °C) - 30 s 600 A 104 °F (40 °C) - 1 min 450 A 104 °F (40 °C) - 3 min 350 A 104 °F (40 °C) - 10 min"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/6fd1383379453068391bf89f60d14453.pdf","sourceUrl":"https://www.se.com/vn/en/product/CR1F150L7/tesys-f-magnetic-latching-contactor-3p3-no-150-a-208-v-ac-dc-coil/","alternativesUrl":"https://aoctrl.com/api/mcp/products/CR1F150L7/alternatives.json"},"ai":{"faq":[{"question":"What are the key ratings for this contactor?","answer":"The CR1F150L7 is a 3-pole NO magnetic latching contactor rated for 150 A at AC-4 duty (motor plugging/inching) and up to 250 A at AC-1 (resistive). The control coil is 208 V AC/DC. Rated breaking capacity is 1500 A at 220–440 V, and short-time withstand current is 1200 A for up to 10 seconds."},{"question":"How do I source the CR1F150L7 now that it's obsolete?","answer":"Since the part is obsolete with no listed factory replacement, sourcing goes through independent channels. Submit an RFQ with your quantity and target delivery window; we can quote from available surplus or broker inventory."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/CR1F150L7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/CR1F150L7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}