{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"CR1F150MZ7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"CR1F150MZ7","canonicalUrl":"https://aoctrl.com/schneider/CR1F150MZ7","factsUrl":"https://aoctrl.com/api/mcp/products/CR1F150MZ7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys F CR1F150MZ7 magnetic latching contactor, 3-pole, 150 A AC-4 rated operational current, 220 V DC low-consumption coil, 250 A conventional free air thermal current.","salesMarkdown":"That low-hold characteristic makes it a fit for applications where sustained coil power is undesirable or where a power loss must not drop the load. Motor power capacity ranges from 40 kW at 220 V AC up to 100 kW at 690 V AC, 50/60 Hz. The contactor handles resistive loads (AC-1) and standard motor starts (AC-3) as well. The 220 V DC control coil operates within 0.85 to 1.1 times its rated voltage for both latching and unlatching. Operating time is 35 to 40 ms to latch, 50 to 100 ms to unlatch. Mechanical durability is rated at 1 million cycles. AC-4 involves making and breaking locked-rotor current, so the contactor sees severe arc stress. The 150 A figure tells you this part can handle a 150 A motor load under those conditions, not just a 250 A resistive heater bank. Rated insulation voltage is 1000 V per IEC 60947-4 and BS 775, with an impulse withstand of 8 kV. That means it's rated for 690 V line-to-line systems with margin — typical for 400 V to 690 V industrial networks. Short-time withstand current (Icw) is 1200 A for up to 10 seconds at 40 °C, tapering to 350 A for 10 minutes. This is the rating that matters for coordination with upstream protective devices — the contactor must survive until the fuse or breaker clears a fault. Associated fuse recommendations are 160 A aM or 250 A gG at up to 440 V. Power dissipation per pole is 6 W in AC-3 duty and 18 W in AC-1. The contactor is rated for operation from -15 °C to 70 °C ambient and storage from -60 °C to 80 °C, with no derating up to 3000 m altitude. This is a panel-mount contactor, not a DIN-rail snap-on. It's sized for bolted connections: terminals accept lugs, ring terminals, or bars — up to 120 mm² cable per pole, or dual 25 x 3 mm bars. Tightening torque is 18 N.m (159 lbf.in). The 6.7-inch depth (171 mm) and 6.4-inch width (163.5 mm) mean it needs a backplate or mounting bracket, not a DIN rail. Typical deployment is in motor control centers or standalone starter enclosures for pumps, conveyors, compressors, and fans — any 3-phase motor load up to 100 kW at 690 V. The latching feature suits applications where a momentary control signal sets the state and holds it without continuous coil power, such as remote or battery-backed installations. No direct successor or cross-reference is listed in the official lifecycle data. If you need a substitute, the TeSys F family includes other frame sizes and coil voltages, but pin-compatibility and mounting footprint must be verified against the specific application. The CR1F150MZ7 is the variant with a 220 V DC low-consumption coil.","metaTitle":"CR1F150MZ7 TeSys F Magnetic Latching Contactor, 150 A AC-4,","metaDescription":"Schneider Electric TeSys F CR1F150MZ7 magnetic latching contactor. 150 A rated operational current (AC-4), 220 V DC low-consumption coil. Current production. Sourced to order again","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"6.7 in (171 mm)","Range":"TeSys","Width":"6.4 in (163.5 mm)","Height":"6.7 in (170 mm)","Category":"22336-CTR,F-LINE,AC,OPEN,NONREV","Product name":"TeSys F","Motor power kW":"65 kW at 1000 V AC 50/60 Hz 100 kW at 690 V AC 50/60 Hz 90 kW at 500...660 V AC 50/60 Hz 80 kW at 440 V AC 50/60 Hz 80 kW at 415 V AC 50/60 Hz 75 kW at 380...400 V AC 50/60 Hz 40 kW at 220...230 V AC 50/60 Hz","Operating time":"35...40 ms latching 50...100 ms unlatching","lifecycle_stage":"current","Average impedance":"0.45 mOhm - Ith 250 A 50 Hz","Device short name":"CR1F","Poles description":"3P","Tightening torque":"159.3 lbf.in (18 N.m)","Device Application":"Control","Operating altitude":"9842.52 ft (3000 m) without derating","Average Consumption":"500 W DC latching 15 W DC unlatching","Protective treatment":"TH","Utilisation category":"AC-4 AC-3 AC-1","Contactor application":"Resistive load Motor control","Mechanical durability":"1 Mcycles","Nbr. of units in pkg.":"1","Associated fuse rating":"160 A aM at 250 A BS88 at 250 A gG at <= 440 V","Maximum operating rate":"120 cyc/h 104 °F (40 °C)","Connections - terminals":"lugs-ring terminals 1 0.2 in² (120 mm²) connector 1 0.2 in² (120 mm²) bars 2 25 x 3 mm","Rated breaking capacity":"1500 A at 220...440 V 1200 A at 500 V 450 A at 1000 V 1100 A at 660/690 V","Product or Component Type":"Magnetic latching contactor","motor power HP (UL / CSA)":"125 hp at 575...600 V AC 50/60 Hz for 3 phase motors 100 hp at 460...480 V AC 50/60 Hz for 3 phase motors 50 hp at 220...240 V AC 50/60 Hz for 3 phase motors 40 hp at 200...208 V AC 50/60 Hz for 3 phase motors","Irms rated making capacity":"1700 A","Power dissipation per pole":"6 W AC-3 18 W AC-1","[Uc] control circuit voltage":"220 V DC low consumption","[Ui] rated insulation voltage":"1000 V IEC 60158-1 1000 V IEC 60947-4 1000 V BS 775 1500 V VDE 0110 group C","Control circuit voltage limits":"Latching: 0.85...1.1 Uc Unlatching: 0.85...1.1 Uc","Power Pole Contact Composition":"3 NO","[Ie] rated operational current":"150 A (at 250 A (at 138 A (at <104 °F (40 °C)) at <= 440 V AC AC-4","[Ue] rated operational voltage":"1000 V AC 25...200 Hz","Ambient Air Temperature for Storage":"-76...176 °F (-60...80 °C)","Ambient Air Temperature for Operation":"5...158 °F (-15...70 °C)","[Uimp] rated impulse withstand voltage":"8 kV","[Icw] rated short-time withstand current":"1200 A 104 °F (40 °C) - 1 s 1200 A 104 °F (40 °C) - 5 s 1200 A 104 °F (40 °C) - 10 s 700 A 104 °F (40 °C) - 30 s 600 A 104 °F (40 °C) - 1 min 450 A 104 °F (40 °C) - 3 min 350 A 104 °F (40 °C) - 10 min","[Ith] conventional free air thermal current":"250 A (at 104 °F (40 °C))"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e8470cdbf1e5edb885ecaef80d8aa892.pdf","sourceUrl":"https://www.se.com/th/en/product/CR1F150MZ7/tesys-f-magnetic-latching-contactor-3p-150-a-220-v-dc-coil-low-consum-/","alternativesUrl":"https://aoctrl.com/api/mcp/products/CR1F150MZ7/alternatives.json"},"ai":{"faq":[{"question":"What is the rated operational current for motor duty?","answer":"The rated operational current is 150 A under AC-4 duty at up to 440 V AC and 40 °C ambient. The conventional free-air thermal current is 250 A."},{"question":"What control voltage does this contactor use?","answer":"The control circuit voltage is 220 V DC, low-consumption type. Latching and unlatching both operate within 0.85 to 1.1 times the rated voltage."},{"question":"What is the mechanical durability of this contactor?","answer":"Mechanical durability is rated at 1 million cycles."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/CR1F150MZ7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/CR1F150MZ7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}