{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"CR1F150N7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"CR1F150N7","canonicalUrl":"https://aoctrl.com/schneider/CR1F150N7","factsUrl":"https://aoctrl.com/api/mcp/products/CR1F150N7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys F CR1F150N7, bistable magnetic contactor, 3 poles, AC-3 440 V 150 A, coil 415 V AC 50/60 Hz.","salesMarkdown":"The CR1F150N7 is a TeSys F bistable magnetic contactor from Schneider Electric, configured as a 3-pole normally open device with a 415 V AC 50/60 Hz control coil. Bistable means the contactor latches magnetically and holds without continuous coil power — the coil draws 1100 VA during the 35...40 ms latching pulse, then drops to 7.3 VA for the unlatching pulse (50...100 ms). This makes it suitable for applications where holding power must be minimized or where a sustained coil signal is unreliable. Its headline rating is 150 A at 440 V in AC-3 duty (motor switching), with a conventional free-air thermal current Ith of 250 A at 40 °C. The AC-3 rating governs motor starting and running; the AC-1 rating (resistive loads) and AC-4 rating (plugging/inching) are also declared. For a 150 A AC-3 contactor, the power dissipation per pole runs 6 W in AC-3, 18 W in AC-1, and 25 W in AC-4 — so panel thermal design should account for the duty cycle. Rated breaking capacity varies with voltage: 1500 A at 220...440 V, 1200 A at 500 V, 1100 A at 600...690 V, and 450 A at 1000 V for the power circuit. Making capacity is 1700 A rms. Associated fuse recommendations are 160 A aM, 250 A gG, or 250 A BS88 for the power circuit — these guide the upstream short-circuit protection selection for Type 1 or Type 2 coordination. The contactor uses bolted connections and is rated for operation from -15 to 70 °C ambient, with no derating required up to 3000 m altitude. Operating position tolerance is ±5°. Mechanical durability is rated at 1,000,000 cycles, and the maximum operating rate is 120 cycles per minute at 40 °C. Protective treatment is TH (tropicalized). Dimensions are 301 mm high, 163.5 mm wide, 171 mm deep — a substantial footprint for panel layout planning.","metaTitle":"Schneider Electric CR1F150N7 TeSys F Bistable Contactor, 150","metaDescription":"CR1F150N7 is an active TeSys F bistable contactor, 3 poles, rated 150 A at 440 V AC-3. Coil 415 V AC 50/60 Hz. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"171 mm","Range":"TeSys","Width":"163.5 mm","title":"CR1F150N7","Height":"301 mm","Coil type":"Standard","description":"bistable contactor CR1-F - 3 poles - AC-3 440V 150 A - coil 415 V","Product name":"TeSys F","Operating time":"35...40 ms latching 50...100 ms unlatching","lifecycle_stage":"current","Quantity per set":"Set of 10","Average impedance":"0.45 Ohm - Ith 250 A 50 Hz for control circuit","Device short name":"CR1F","Poles description":"3P","Operating altitude":"3000 m without derating","Operating position":"+/- 5°","Average Consumption":"1100 VA AC 50/60 Hz latching 7.3 VA AC 50/60 Hz unlatching","Protective treatment":"TH","Utilisation category":"AC-3 AC-1 AC-4","Mechanical durability":"1000000 cycles","Associated fuse rating":"160 A aM for power circuit 250 A BS88 for power circuit 250 A gG for power circuit","Maximum operating rate":"120 cyc/mn 40 °C","Connections - terminals":"Bolted connection","Rated breaking capacity":"1100 A at 600...690 V for power circuit 1200 A at 500 V for power circuit 1500 A at 220...440 V for power circuit 450 A at 1000 V for power circuit","Product or component type":"Magnetic contactor","Irms rated making capacity":"1700 A for power circuit","Power dissipation per pole":"18 W AC-1 6 W AC-3 25 W AC-4","[Uc] control circuit voltage":"415 V AC 50/60 Hz","[Ui] rated insulation voltage":"Control circuit: 1000 V conforming to BS 775 Control circuit: 1000 V conforming to IEC 60158-1 Control circuit: 1000 V conforming to IEC 60947-4 Control circuit: 1500 V conforming to VDE 0110 group C","Control circuit voltage limits":"Latching: 0.85...1.1 Uc Unlatching: 0.85...1.1 Uc","Power Pole Contact Composition":"3 NO","[Ie] rated operational current":"150 A (at 250 A (at 138 A (at <40 °C) AC/DC AC-4 for power circuit","[Ue] rated operational voltage":"Power circuit: 1000 V AC Power circuit: 1000 V DC","Ambient air temperature for operation":"-15...70 °C","[Ith] conventional free air thermal current":"250 A (at 40 °C) for power circuit"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/08c1ad9d5d8b3e10a5510e751b2f687a.pdf","sourceUrl":"https://www.se.com/uk/en/product/CR1F150N7/bistable-contactor-cr1f-3-poles-ac3-440v-150-a-coil-415-v/"},"ai":{"faq":[{"question":"What are the key ratings for the CR1F150N7?","answer":"Rated operational current is 150 A at 440 V AC-3 (motor duty). Conventional free-air thermal current Ith is 250 A at 40 °C. Control coil voltage is 415 V AC 50/60 Hz. Rated insulation voltage is 1000 V for the control circuit per IEC 60947-4."},{"question":"What is the CR1F150N7's depth?","answer":"The depth is listed as 171 mm."},{"question":"What compliance documentation is available for the CR1F150N7?","answer":"The control circuit is rated at 1000 V insulation voltage conforming to BS 775, IEC 60158-1, IEC 60947-4, and VDE 0110 group C. The part carries protective treatment TH (tropicalized). No specific RoHS or REACH statements are in this record, but as a current Schneider Electric catalog item, standard EU compliance documentation is typically available upon request."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/CR1F150N7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/CR1F150N7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}