{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"CR1F185FZ7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"CR1F185FZ7","canonicalUrl":"https://aoctrl.com/schneider/CR1F185FZ7","factsUrl":"https://aoctrl.com/api/mcp/products/CR1F185FZ7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys F CR1F185FZ7, magnetic latching contactor, 3-pole, 185 A rated operational current, 110 V DC low consumption coil, 1000 V AC rated operational voltage.","salesMarkdown":"The CR1F185FZ7 is a 3-pole magnetic latching contactor from the Schneider Electric TeSys F range, designed for control applications switching resistive and motor loads. The 110 V DC low-consumption coil draws 500 W to latch and 20 W to unlatch, with operating times of 35...40 ms latching and 50...100 ms unlatching. Rated operational voltage is 1000 V AC at 25...200 Hz, with a rated insulation voltage of 1000 V per IEC 60947-4 and BS 775. The utilisation categories cover AC-1 (resistive), AC-3 (motor starting/running), and AC-4 (plugging/inching) — so it handles the full range of contactor duty cycles. Motor power ratings span 55 kW at 220...230 V up to 110 kW at 690 V AC, and UL/CSA horsepower ratings go from 50 hp at 200...208 V to 150 hp at 575...600 V. The AC-1 rating (275 A Ith) is higher because resistive loads don't produce the same inrush. The magnetic latching mechanism holds the contacts closed without continuous coil power — the 500 W pulse latches it, then the coil drops to zero hold current. That makes it suitable for applications where a sustained coil draw is undesirable (battery-backed systems, low-energy designs). The unlatching pulse is only 20 W, so the total energy per cycle is modest. Rated short-time withstand current (Icw) is 1500 A for up to 10 seconds, dropping to 400 A at 10 minutes — this defines how long the contactor can carry a fault current before the upstream protection must open. The associated fuse recommendation is 200 A aM or 315 A gG at ≤ 440 V, which coordinates with the contactor's breaking capacity. The contactor measures 7.1 in deep, 6.6 in wide, and 6.9 in tall — sized for panel mounting with lug-ring terminals accepting up to 150 mm² cable or two 25 x 3 mm bars. Tightening torque is 159.3 lbf·in (18 N·m) on the power connections. The TH protective treatment means it's tropicalized for humid environments. Maximum operating rate is 120 cycles per hour at 40 °C. It can be used up to 3000 m altitude without derating. Mechanical durability is rated at 1 million cycles.","metaTitle":"CR1F185FZ7 TeSys F Magnetic Latching Contactor, 185 A, 110 V","metaDescription":"Schneider Electric TeSys F CR1F185FZ7 magnetic latching contactor, 3-pole, 185 A rated operational current, 110 V DC low consumption coil. Current lifecycle stage.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"7.1 in (181 mm)","Range":"TeSys","Width":"6.6 in (168.5 mm)","title":"CR1F185FZ7","Height":"6.9 in (174 mm)","Category":"22336-CTR,F-LINE,AC,OPEN,NONREV","description":"TeSys F magnetic latching contactor - 3P - 185 A - 110 V DC coil - low consum.","Product name":"TeSys F","Motor power kW":"100 kW at 1000 V AC 50/60 Hz 110 kW at 690 V AC 50/60 Hz 110 kW at 500...660 V AC 50/60 Hz 100 kW at 440 V AC 50/60 Hz 100 kW at 415 V AC 50/60 Hz 90 kW at 380...400 V AC 50/60 Hz 55 kW at 220...230 V AC 50/60 Hz","Operating time":"35...40 ms latching 50...100 ms unlatching","lifecycle_stage":"current","Average impedance":"0.36 mOhm - Ith 275 A 50 Hz","Device short name":"CR1F","Poles description":"3P","Tightening torque":"159.3 lbf.in (18 N.m)","Device Application":"Control","Operating altitude":"9842.52 ft (3000 m) without derating","Average Consumption":"500 W DC latching 20 W DC unlatching","Protective treatment":"TH","Utilisation category":"AC-4 AC-1 AC-3","Contactor application":"Resistive load Motor control","Mechanical durability":"1 Mcycles","Nbr. of units in pkg.":"1","Associated fuse rating":"200 A aM at 315 A BS88 at 315 A gG at <= 440 V","Maximum operating rate":"120 cyc/h 104 °F (40 °C)","Connections - terminals":"bars 2 25 x 3 mm lugs-ring terminals 1 0.2 in² (150 mm²) connector 1 0.2 in² (150 mm²)","Rated breaking capacity":"1800 A at 220...440 V 1600 A at 500 V 600 A at 1000 V 1200 A at 660/690 V","Product or Component Type":"Magnetic latching contactor","motor power HP (UL / CSA)":"150 hp at 575...600 V AC 50/60 Hz for 3 phase motors 125 hp at 460...480 V AC 50/60 Hz for 3 phase motors 60 hp at 220...240 V AC 50/60 Hz for 3 phase motors 50 hp at 200...208 V AC 50/60 Hz for 3 phase motors","Irms rated making capacity":"2100 A","Power dissipation per pole":"12 W AC-3 26 W AC-1","[Uc] control circuit voltage":"110 V DC low consumption","[Ui] rated insulation voltage":"1000 V IEC 60158-1 1000 V IEC 60947-4 1000 V BS 775 1500 V VDE 0110 group C","Control circuit voltage limits":"Latching: 0.85...1.1 Uc Unlatching: 0.85...1.1 Uc","Power Pole Contact Composition":"3 NO","[Ie] rated operational current":"185 A (at 275 A (at 170 A (at <104 °F (40 °C)) at <= 440 V AC AC-4","[Ue] rated operational voltage":"1000 V AC 25...200 Hz","Ambient Air Temperature for Storage":"-76...176 °F (-60...80 °C)","Ambient Air Temperature for Operation":"5...158 °F (-15...70 °C)","[Uimp] rated impulse withstand voltage":"8 kV","[Icw] rated short-time withstand current":"1500 A 104 °F (40 °C) - 1 s 1500 A 104 °F (40 °C) - 5 s 1500 A 104 °F (40 °C) - 10 s 920 A 104 °F (40 °C) - 30 s 740 A 104 °F (40 °C) - 1 min 500 A 104 °F (40 °C) - 3 min 400 A 104 °F (40 °C) - 10 min","[Ith] conventional free air thermal current":"275 A (at 104 °F (40 °C))"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/1e456ef0198954ee42b527c178605a84.pdf","sourceUrl":"https://www.se.com/th/en/product/CR1F185FZ7/tesys-f-magnetic-latching-contactor-3p-185-a-110-v-dc-coil-low-consum-/"},"ai":{"faq":[{"question":"What are the key ratings for the CR1F185FZ7?","answer":"It is a 3-pole magnetic latching contactor rated 185 A in AC-3, 275 A Ith, 1000 V AC operational voltage, with a 110 V DC low-consumption coil. Motor power goes up to 110 kW at 690 V AC or 150 hp at 575-600 V (UL/CSA)."},{"question":"What is the depth of the CR1F185FZ7?","answer":"The depth is 7.1 in (181 mm). Overall dimensions are 7.1 x 6.6 x 6.9 in (181 x 168.5 x 174 mm)."},{"question":"What compliance documentation is available for the CR1F185FZ7?","answer":"The contactor carries rated insulation voltage certifications per IEC 60947-4, BS 775, and VDE 0110 group C. The TH protective treatment indicates compliance with tropicalized environment standards. Specific RoHS/REACH/UL documentation should be verified against the manufacturer's declarations for this order code."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/CR1F185FZ7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/CR1F185FZ7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}