{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"CR1F2654EZ7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"CR1F2654EZ7","canonicalUrl":"https://aoctrl.com/schneider/CR1F2654EZ7","factsUrl":"https://aoctrl.com/api/mcp/products/CR1F2654EZ7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider TeSys F CR1F2654EZ7, magnetic latching contactor, 4P (4 NO), 265 A, 48 V DC coil, active lifecycle.","salesMarkdown":"The Schneider TeSys F CR1F2654EZ7 is a magnetic latching contactor — 4 poles, all normally open (4 NO), rated for 265 A at 440 V AC in AC-3 duty, with a 48 V DC latching coil. The latching coil holds the contacts closed without continuous power draw — it pulses to latch (500 W) and pulses again to unlatch (40 W), then sits there drawing nothing. The utilisation categories tell you what loads it's certified for: AC-1 (resistive, 350 A at 40 °C), AC-3 (squirrel-cage motors, 265 A), and AC-4 (plugging/inching, 245 A). So if you're switching a resistive heater bank, you can push it to 350 A; for a conveyor motor, stay at or under 265 A. Control voltage limits are 0.85 to 1.1 times the 48 V DC nominal for both latching and unlatching. Operating time is 40 to 75 ms to latch, 50 to 100 ms to unlatch, with a maximum rate of 120 cycles/hour at 40 °C. The 1 Mcycle mechanical durability is the expected life before mechanical wear — not electrical life under load, which will be lower depending on switching frequency and current. For a contactor this size (265 A frame), 1 million cycles is typical for the class; in a pump-start application cycling a few times an hour, that's decades of service. This is a panel-mount contactor — no DIN rail clip on this frame size. It bolts in with four M8 or equivalent hardware, torqued to 35 N·m (309.8 lbf·in) on the main power connections. The terminals accept lugs or ring terminals up to 240 mm² (0.4 in²), or bars up to 2 × 32 × 4 mm. That's a serious cable — 240 mm² is roughly 500 MCM — so plan for a gland plate or cable entry that accommodates that bend radius. Depth is 213 mm (8.4 in), width 244.5 mm (9.6 in), height 203 mm (8.0 in). Make sure the enclosure depth clears the cable exit. Associated fuse recommendation is 315 A aM or 400 A gG at 440 V.","metaTitle":"Schneider TeSys F CR1F2654EZ7 Magnetic Latching Contactor, 2","metaDescription":"Schneider TeSys F CR1F2654EZ7 magnetic latching contactor, 4P (4 NO), 265 A rated operational current, 48 V DC coil. Active lifecycle, sourced to order. Depth 213 mm.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"8.4 in (213 mm)","Range":"TeSys","Width":"9.6 in (244.5 mm)","title":"CR1F2654EZ7","Height":"8.0 in (203 mm)","Category":"22336-CTR,F-LINE,AC,OPEN,NONREV","description":"TeSys F magnetic latching contactor - 4P(4 NO) - 265 A - 48 V DC coil","Product name":"TeSys F","Operating time":"40...75 ms latching 50...100 ms unlatching","lifecycle_stage":"current","Average impedance":"0.32 mOhm - Ith 350 A 50 Hz","Device short name":"CR1F","Poles description":"4P","Tightening torque":"309.8 lbf.in (35 N.m)","Operating altitude":"9842.52 ft (3000 m) without derating","Average Consumption":"500 W DC latching 40 W DC unlatching","Control circuit type":"DC low consumption","Protective treatment":"TC","Utilisation category":"AC-3 AC-4 AC-1","Contactor application":"Resistive load Motor control","Mechanical durability":"1 Mcycles","Nbr. of units in pkg.":"1","Associated fuse rating":"315 A aM at 400 A BS88 at 400 A gG at <= 440 V","Maximum operating rate":"120 cyc/h 104 °F (40 °C)","Connections - terminals":"lugs-ring terminals 1 0.4 in² (240 mm²) connector 1 0.4 in² (240 mm²) bars 2 32 x 4 mm","Rated breaking capacity":"2450 A at 220...440 V 2200 A at 500 V 800 A at 1000 V 1700 A at 660/690 V","Product or Component Type":"Magnetic latching contactor","Irms rated making capacity":"2940 A","Power dissipation per pole":"22 W AC-3 39 W AC-1","[Uc] control circuit voltage":"48 V DC","[Ui] rated insulation voltage":"1000 V IEC 60158-1 1000 V IEC 60947-4 1000 V BS 775 1500 V VDE 0110 group C","Control circuit voltage limits":"Latching: 0.85...1.1 Uc Unlatching: 0.85...1.1 Uc","Power Pole Contact Composition":"4 NO","[Ie] rated operational current":"265 A (at 350 A (at 245 A (at <104 °F (40 °C)) at <= 440 V AC AC-4","[Ue] rated operational voltage":"1000 V AC 25...200 Hz","Ambient Air Temperature for Storage":"-76...176 °F (-60...80 °C)","Ambient Air Temperature for Operation":"5...158 °F (-15...70 °C)","[Icw] rated short-time withstand current":"2200 A 104 °F (40 °C) - 1 s 2200 A 104 °F (40 °C) - 5 s 2200 A 104 °F (40 °C) - 10 s 1230 A 104 °F (40 °C) - 30 s 950 A 104 °F (40 °C) - 1 min 620 A 104 °F (40 °C) - 3 min 480 A 104 °F (40 °C) - 10 min"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/371a8b45b40f2306bf680aad55d1c48b.pdf","sourceUrl":"https://www.se.com/sg/en/product/CR1F2654EZ7/tesys-f-magnetic-latching-contactor-4p4-no-265-a-48-v-dc-coil/"},"ai":{"faq":[{"question":"What is the depth of the CR1F2654EZ7?","answer":"The depth is 213 mm (8.4 in). This is the front-to-back dimension of the contactor body, not including cable bend radius or lug protrusion."},{"question":"What range does the CR1F2654EZ7 belong to?","answer":"It belongs to the Schneider TeSys range, specifically the TeSys F series of heavy-duty contactors."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/CR1F2654EZ7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/CR1F2654EZ7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}