{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"CR1F2654FZ7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"CR1F2654FZ7","canonicalUrl":"https://aoctrl.com/schneider/CR1F2654FZ7","factsUrl":"https://aoctrl.com/api/mcp/products/CR1F2654FZ7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys F series, magnetic latching contactor CR1F2654FZ7, 4 NO, 265 A AC-4 at ≤440 V, 110 V DC low-consumption coil.","salesMarkdown":"Its 110 V DC low-consumption coil latches magnetically, meaning it holds position without continuous coil power, drawing 500 W DC during latching and 40 W DC during unlatching. This makes it suited for applications where sustained coil energisation is undesirable or where power must be conserved. The headline rating is 265 A in AC-4 duty at ≤440 V (40 °C ambient), which governs switching of motors under starting and plugging conditions — the most demanding utilisation category for contactors. For AC-3 (normal motor start/run) the same contactor carries 350 A, and for AC-1 (resistive loads) it also carries 350 A. Motor power ratings span the voltage range: 132 kW at 380-400 V AC, 140 kW at 415 V, 160 kW at 500-660 V, and 147 kW at 1000 V AC (all 50/60 Hz). UL/CSA horsepower ratings are also provided: 150 hp at 460-480 V, 175 hp at 575-600 V. The rated operational voltage (Ue) is 1000 V AC at 25-200 Hz, with a rated insulation voltage (Ui) of 1000 V per IEC 60947-4 and IEC 60158-1. The rated breaking capacity tells you the fault-clearing ability: 2450 A at 220-440 V, 2200 A at 500 V, 1700 A at 660/690 V, and 800 A at 1000 V. The rated making capacity (Irms) is 2940 A — the peak inrush the contactor can close onto. These numbers matter for coordination with upstream protection: the associated fuse ratings are 315 A aM, 400 A BS88, or 400 A gG at ≤440 V. Short-time withstand (Icw) is 2200 A for 1, 5, and 10 seconds, then derates to 1230 A at 30 s, 950 A at 1 min, and 480 A at 10 min. This defines how long the contactor can carry fault current without welding closed — critical for selective coordination studies. Operating time is 50-100 ms unlatching and 45-50 ms latching. The control circuit voltage limits are 0.85 to 1.1 Uc for both latching and unlatching, so the 110 V DC coil will operate reliably between roughly 93.5 V and 121 V DC. Average impedance per pole is 0.32 mOhm at 350 A, 50 Hz, which translates to power dissipation of 22 W per pole in AC-3 and 39 W per pole in AC-1. The CR1F2654FZ7 is a panel-mount contactor — not DIN-rail snap-on. Dimensions are 8.4 in (213 mm) deep, 9.6 in (244.5 mm) wide, and 8.0 in (203 mm) tall. Connections accept lugs, ring terminals, or bars: one 240 mm² connector per pole, or two 32 x 4 mm bars. Tightening torque is 35 N.m (309.8 lbf.in) on the main power terminals. The protective treatment is TH (tropicalised), suitable for humid or corrosive environments. The contactor is rated for control applications and carries utilisation categories AC-1, AC-3, and AC-4 — covering resistive heating, standard motor starting, and severe motor duty (plugging, inching).","metaTitle":"CR1F2654FZ7 TeSys F Magnetic Latching Contactor, 265 A AC-4,","metaDescription":"CR1F2654FZ7 TeSys F magnetic latching contactor, 4 NO, 265 A AC-4 at 440 V, 110 V DC coil. Active lifecycle. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"8.4 in (213 mm)","Range":"TeSys","Width":"9.6 in (244.5 mm)","Height":"8.0 in (203 mm)","Category":"22336-CTR,F-LINE,AC,OPEN,NONREV","Product name":"TeSys F","Motor power kW":"147 kW at 1000 V AC 50/60 Hz 160 kW at 690 V AC 50/60 Hz 160 kW at 500...660 V AC 50/60 Hz 140 kW at 440 V AC 50/60 Hz 140 kW at 415 V AC 50/60 Hz 132 kW at 380...400 V AC 50/60 Hz 75 kW at 220...230 V AC 50/60 Hz","Operating time":"50...100 ms unlatching 45...50 ms latching","lifecycle_stage":"current","Average impedance":"0.32 mOhm - Ith 350 A 50 Hz","Device short name":"CR1F","Poles description":"4P","Tightening torque":"309.8 lbf.in (35 N.m)","Device Application":"Control","Operating altitude":"9842.52 ft (3000 m) without derating","Average Consumption":"500 W DC latching 40 W DC unlatching","Protective treatment":"TH","Utilisation category":"AC-4 AC-1 AC-3","Contactor application":"Motor control Resistive load","Mechanical durability":"1 Mcycles","Nbr. of units in pkg.":"1","Associated fuse rating":"315 A aM at 400 A BS88 at 400 A gG at <= 440 V","Maximum operating rate":"120 cyc/h 104 °F (40 °C)","Connections - terminals":"lugs-ring terminals 1 0.4 in² (240 mm²) connector 1 0.4 in² (240 mm²) bars 2 32 x 4 mm","Rated breaking capacity":"2450 A at 220...440 V 2200 A at 500 V 800 A at 1000 V 1700 A at 660/690 V","Product or Component Type":"Magnetic latching contactor","motor power HP (UL / CSA)":"175 hp at 575...600 V AC 50/60 Hz for 3 phase motors 150 hp at 460...480 V AC 50/60 Hz for 3 phase motors 75 hp at 220...240 V AC 50/60 Hz for 3 phase motors 60 hp at 200...208 V AC 50/60 Hz for 3 phase motors","Irms rated making capacity":"2940 A","Power dissipation per pole":"22 W AC-3 39 W AC-1","[Uc] control circuit voltage":"110 V DC low consumption","[Ui] rated insulation voltage":"1000 V IEC 60158-1 1000 V IEC 60947-4 1000 V BS 775 1500 V VDE 0110 group C","Control circuit voltage limits":"Latching: 0.85...1.1 Uc Unlatching: 0.85...1.1 Uc","Power Pole Contact Composition":"4 NO","[Ie] rated operational current":"265 A (at 350 A (at 245 A (at <104 °F (40 °C)) at <= 440 V AC AC-4","[Ue] rated operational voltage":"1000 V AC 25...200 Hz","Ambient Air Temperature for Storage":"-76...176 °F (-60...80 °C)","Ambient Air Temperature for Operation":"5...158 °F (-15...70 °C)","[Uimp] rated impulse withstand voltage":"8 kV","[Icw] rated short-time withstand current":"2200 A 104 °F (40 °C) - 1 s 2200 A 104 °F (40 °C) - 5 s 2200 A 104 °F (40 °C) - 10 s 1230 A 104 °F (40 °C) - 30 s 950 A 104 °F (40 °C) - 1 min 620 A 104 °F (40 °C) - 3 min 480 A 104 °F (40 °C) - 10 min","[Ith] conventional free air thermal current":"350 A (at 104 °F (40 °C))"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/df116895b073e17d3511cef1130915c2.pdf","sourceUrl":"https://www.se.com/us/en/product/CR1F2654FZ7/tesys-f-magnetic-latching-contactor-4p-350-a-110-v-dc-coil-low-consum-/","alternativesUrl":"https://aoctrl.com/api/mcp/products/CR1F2654FZ7/alternatives.json"},"ai":{"faq":[{"question":"What are the key ratings for the CR1F2654FZ7?","answer":"Rated operational current is 265 A in AC-4 at ≤440 V, 350 A in AC-3 and AC-1. Conventional free-air thermal current (Ith) is 350 A at 40 °C. Rated operational voltage is 1000 V AC. Motor power ranges from 75 kW at 220-230 V to 160 kW at 500-660 V. The coil is 110 V DC low-consumption, latching type."},{"question":"What is the closest alternative to the CR1F2654FZ7 in the TeSys F range?","answer":"Within the TeSys F magnetic latching contactor family, the closest peer is the CR1F2654FZ7 itself — there is no pin-compatible drop-in with different ratings. For a non-latching equivalent, the standard TeSys F contactor (LC1F series) with the same 265 A AC-4 rating would be the functional alternative, but it lacks the magnetic latching feature and requires continuous coil power. The form factor and terminal arrangement differ, so verify mounting and wiring before substituting."},{"question":"What compliance documentation is available for the CR1F2654FZ7?","answer":"The contactor carries IEC ratings per 60947-4 and 60158-1, with a rated insulation voltage of 1000 V per those standards and 1500 V per VDE 0110 group C. UL/CSA horsepower ratings are provided. The protective treatment is TH (tropicalised). Specific RoHS/REACH declarations are available from the manufacturer upon request."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/CR1F2654FZ7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/CR1F2654FZ7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}