{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"CR1F2654MZ7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"CR1F2654MZ7","canonicalUrl":"https://aoctrl.com/schneider/CR1F2654MZ7","factsUrl":"https://aoctrl.com/api/mcp/products/CR1F2654MZ7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys F magnetic latching contactor, CR1F2654MZ7, 4-pole, 265 A AC-4 rated operational current, 220 V DC low-consumption control circuit.","salesMarkdown":"The CR1F2654MZ7 is a TeSys F magnetic latching contactor from Schneider Electric, designed for control applications where the coil must hold its state without continuous power. The 265 A rated operational current in AC-4 duty (at ≤104 °F / 40 °C, ≤440 V AC) is the figure that governs motor reversing, inching, or plugging applications — the most severe switching category for a contactor, where it makes and breaks stalled-rotor currents. For less demanding AC-3 motor starting, the same pole set carries 350 A conventionally. The 220 V DC low-consumption control circuit draws 500 W during latching and 40 W during unlatching, meaning the coil power supply must be sized for the inrush, not the hold. The 4-pole configuration (4 NO) suits three-phase motor circuits with a spare pole for auxiliary switching or a second load. The 1 Mcycles mechanical durability rating sets the expected life before a mechanical rebuild — at 120 cycles per hour maximum operating rate, that is roughly 8,333 hours of continuous cycling at full rate. The 8 kV rated impulse withstand voltage (Uimp) and 1000 V rated insulation voltage (Ui) per IEC 60947-4 mean the contactor is coordinated for 400 V and 690 V distribution systems with adequate clearance for surge events. ## Integration notes Mounting dimensions: 8.4 in (213 mm) depth, 9.6 in (244.5 mm) width, 8.0 in (203 mm) height. The lugs-ring terminals accept up to 240 mm² conductor per pole, with two 32 x 4 mm bars as an alternative. Tightening torque is 309.8 lbf·in (35 N·m) — a torque wrench is required for the power connections; hand-tightening will not meet the spec. The associated fuse recommendation is 315 A aM or 400 A gG at ≤440 V, or 400 A BS88 — this coordinates the short-circuit protection with the contactor's 2200 A rated short-time withstand current (Icw) for 1 second.","metaTitle":"CR1F2654MZ7 TeSys F Magnetic Latching Contactor, 265 A AC-4","metaDescription":"CR1F2654MZ7 TeSys F magnetic latching contactor, 4-pole, 265 A AC-4 rated operational current, 220 V DC control. Sourced to order against an RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"8.4 in (213 mm)","Range":"TeSys","Width":"9.6 in (244.5 mm)","title":"CR1F2654MZ7","Height":"8.0 in (203 mm)","Category":"22336-CTR,F-LINE,AC,OPEN,NONREV","description":"TeSys F magnetic latching contactor - 4P - 350 A - 220 V DC coil - low consum.","Product name":"TeSys F","Motor power kW":"147 kW at 1000 V AC 50/60 Hz 160 kW at 690 V AC 50/60 Hz 160 kW at 500...660 V AC 50/60 Hz 140 kW at 440 V AC 50/60 Hz 140 kW at 415 V AC 50/60 Hz 132 kW at 380...400 V AC 50/60 Hz 75 kW at 220...230 V AC 50/60 Hz","Operating time":"50...100 ms unlatching 45...50 ms latching","lifecycle_stage":"current","Average impedance":"0.32 mOhm - Ith 350 A 50 Hz","Device short name":"CR1F","Poles description":"4P","Tightening torque":"309.8 lbf.in (35 N.m)","Device Application":"Control","Operating altitude":"9842.52 ft (3000 m) without derating","Average Consumption":"500 W DC latching 40 W DC unlatching","Protective treatment":"TH","Utilisation category":"AC-1 AC-3 AC-4","Contactor application":"Resistive load Motor control","Mechanical durability":"1 Mcycles","Nbr. of units in pkg.":"1","Associated fuse rating":"315 A aM at 400 A BS88 at 400 A gG at <= 440 V","Maximum operating rate":"120 cyc/h 104 °F (40 °C)","Connections - terminals":"lugs-ring terminals 1 0.4 in² (240 mm²) connector 1 0.4 in² (240 mm²) bars 2 32 x 4 mm","Rated breaking capacity":"2450 A at 220...440 V 2200 A at 500 V 800 A at 1000 V 1700 A at 660/690 V","Product or Component Type":"Magnetic latching contactor","motor power HP (UL / CSA)":"175 hp at 575...600 V AC 50/60 Hz for 3 phase motors 150 hp at 460...480 V AC 50/60 Hz for 3 phase motors 75 hp at 220...240 V AC 50/60 Hz for 3 phase motors 60 hp at 200...208 V AC 50/60 Hz for 3 phase motors","Irms rated making capacity":"2940 A","Power dissipation per pole":"22 W AC-3 39 W AC-1","[Uc] control circuit voltage":"220 V DC low consumption","[Ui] rated insulation voltage":"1000 V IEC 60158-1 1000 V IEC 60947-4 1000 V BS 775 1500 V VDE 0110 group C","Control circuit voltage limits":"Latching: 0.85...1.1 Uc Unlatching: 0.85...1.1 Uc","Power Pole Contact Composition":"4 NO","[Ie] rated operational current":"265 A (at 350 A (at 245 A (at <104 °F (40 °C)) at <= 440 V AC AC-4","[Ue] rated operational voltage":"1000 V AC 25...200 Hz","Ambient Air Temperature for Storage":"-76...176 °F (-60...80 °C)","Ambient Air Temperature for Operation":"5...158 °F (-15...70 °C)","[Uimp] rated impulse withstand voltage":"8 kV","[Icw] rated short-time withstand current":"2200 A 104 °F (40 °C) - 1 s 2200 A 104 °F (40 °C) - 5 s 2200 A 104 °F (40 °C) - 10 s 1230 A 104 °F (40 °C) - 30 s 950 A 104 °F (40 °C) - 1 min 620 A 104 °F (40 °C) - 3 min 480 A 104 °F (40 °C) - 10 min","[Ith] conventional free air thermal current":"350 A (at 104 °F (40 °C))"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/72a4eac5ebadb4717eb05cf3830f6187.pdf","sourceUrl":"https://www.se.com/sg/en/product/CR1F2654MZ7/tesys-f-magnetic-latching-contactor-4p-350-a-220-v-dc-coil-low-consum-/"},"ai":{"faq":[{"question":"What is the closest alternative to the CR1F2654MZ7 in the TeSys F family?","answer":"The CR1F2654MZ7 is a magnetic latching contactor with a 220 V DC control circuit. The closest alternative would be another TeSys F magnetic latching contactor with the same 4-pole, 265 A AC-4 rating but a different control voltage — for example, a 24 V DC or 48 V DC version if the panel supply differs. The mechanical and power pole ratings are identical across the voltage variants; only the coil changes."},{"question":"What compliance documentation does Schneider Electric provide for the CR1F2654MZ7?","answer":"Standard documentation includes RoHS and REACH compliance declarations, plus UL and IEC certification reports per the rated insulation voltage (1000 V IEC 60947-4) and impulse withstand voltage (8 kV). These are available on request with the order."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/CR1F2654MZ7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/CR1F2654MZ7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}