{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"CR1F2654N7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"CR1F2654N7","canonicalUrl":"https://aoctrl.com/schneider/CR1F2654N7","factsUrl":"https://aoctrl.com/api/mcp/products/CR1F2654N7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys F CR1F2654N7, magnetic latching contactor, 4-pole, 265 A rated operational current, 415 V AC 50/60 Hz coil.","salesMarkdown":"The CR1F2654N7 is a TeSys F magnetic latching contactor from Schneider Electric — a 4-pole, 4 NO device rated for 265 A operational current at ≤ 440 V AC in AC-3 duty, and 350 A in AC-1. That latching feature is the key differentiator: once pulsed, it stays closed magnetically, so it doesn't drain control power or generate heat in the coil circuit during normal running. The headline 265 A isn't the full story — that's the rated operational current (Ie) in AC-3 (motor switching) at ≤ 440 V, 40 °C. In AC-1 (resistive loads), it carries 350 A. So if you're driving a motor, size on the 265 A figure; if it's a heater bank, you get more headroom. The motor power table covers the voltage sweep: 132 kW at 380-400 V, 160 kW at 690 V, and 175 hp under UL/CSA at 575-600 V. The latching coil pulls 1800 VA on the pulse but only 12 VA to unlatch — that's the spec to check against your control transformer sizing. Breaking capacity is 2450 A at 440 V for the power circuit, which is well above typical fault levels in a motor branch circuit, but you still need the upstream fuse or breaker for SCCR coordination. ## Integration notes Panel mounting is straightforward: the contactor bolts to a panel or clips onto a notched AM1-EC rail. The power terminals accept lugs, ring terminals, or bars up to 240 mm² — torque to 35 N·m (309.8 lbf·in). The 4 NO power poles are all normally open, so plan your control scheme accordingly; there are no built-in auxiliary contacts, so you'll need a separate auxiliary block if you need feedback for a PLC or status indication.","metaTitle":"Schneider CR1F2654N7 TeSys F Magnetic Latching Contactor, 26","metaDescription":"Schneider Electric CR1F2654N7 TeSys F magnetic latching contactor, 4-pole, 265 A rated operational current, 415 V AC coil. Active production. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Contactors"],"specifications":{"Depth":"8.4 in (213 mm)","Range":"TeSys","Width":"9.6 in (244.5 mm)","Height":"8.0 in (203 mm)","Category":"22331-CTR,F-LINE,DC,OPEN,NONREV","Standards":"BS 5424 JEM 1038 VDE 0660 IEC 60947-4 NF C 63-110","Product name":"TeSys F","Motor power kW":"147 kW at 1000 V AC 50/60 Hz 160 kW at 690 V AC 50/60 Hz 160 kW at 500...660 V AC 50/60 Hz 140 kW at 440 V AC 50/60 Hz 140 kW at 415 V AC 50/60 Hz 132 kW at 380...400 V AC 50/60 Hz 75 kW at 220...230 V AC 50/60 Hz","Operating time":"40...75 ms latching 50...100 ms unlatching","lifecycle_stage":"current","Mounting Support":"Panel mounting Notched AM1-EC rail","Average impedance":"0.32 mOhm - Ith 350 A 50 Hz","Device short name":"CR1F","Poles description":"4P","Tightening torque":"309.8 lbf.in (35 N.m)","Device Application":"Control","Operating altitude":"9842.52 ft (3000 m) without derating","Average Consumption":"1800 VA AC 50...400 Hz latching 12 VA AC 50...400 Hz unlatching 1800 VA DC latching 12 VA DC unlatching","Protective treatment":"TH","Utilisation category":"AC-4 AC-1 AC-3","Contactor application":"Resistive load Motor control","Mechanical durability":"1 Mcycles","Nbr. of units in pkg.":"1","Associated fuse rating":"315 A aM at 400 A BS88 at 400 A gG at <= 440 V for power circuit","Maximum operating rate":"120 cyc/h 104 °F (40 °C)","Connections - terminals":"lugs-ring terminals 1 0.4 in² (240 mm²) connector 1 0.4 in² (240 mm²) bars 2 32 x 4 mm","IP degree of protection":"IP20 front face IEC 60529","Rated breaking capacity":"2450 A at 220...440 V for power circuit 2200 A at 500 V for power circuit 800 A at 1000 V for power circuit 1700 A at 660/690 V for power circuit","Product or Component Type":"Magnetic latching contactor","motor power HP (UL / CSA)":"175 hp at 575...600 V AC 50/60 Hz for 3 phase motors 150 hp at 460...480 V AC 50/60 Hz for 3 phase motors 75 hp at 220...240 V AC 50/60 Hz for 3 phase motors 60 hp at 200...208 V AC 50/60 Hz for 3 phase motors","Irms rated making capacity":"2940 A for power circuit","Power dissipation per pole":"22 W AC-3 39 W AC-1","[Uc] control circuit voltage":"415 V AC 50/60 Hz","[Ui] rated insulation voltage":"1000 V IEC 60158-1 1000 V IEC 60947-4 1000 V BS 775 1500 V VDE 0110 group C","Control circuit voltage limits":"Latching: 0.85...1.1 Uc Unlatching: 0.85...1.1 Uc","Power Pole Contact Composition":"4 NO","[Ie] rated operational current":"265 A (at 350 A (at 245 A (at <104 °F (40 °C)) at <= 440 V AC AC-4","[Ue] rated operational voltage":"1000 V AC 25...200 Hz","Ambient Air Temperature for Storage":"-76...176 °F (-60...80 °C)","Ambient Air Temperature for Operation":"5...158 °F (-15...70 °C)","[Uimp] rated impulse withstand voltage":"8 kV","[Icw] rated short-time withstand current":"2200 A 104 °F (40 °C) - 1 s 2200 A 104 °F (40 °C) - 5 s 2200 A 104 °F (40 °C) - 10 s 1230 A 104 °F (40 °C) - 30 s 950 A 104 °F (40 °C) - 1 min 620 A 104 °F (40 °C) - 3 min 480 A 104 °F (40 °C) - 10 min","[Ith] conventional free air thermal current":"350 A (at 104 °F (40 °C)) for power circuit"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/52fc89877a1e538df8f93f9b492cb77c.pdf","sourceUrl":"https://www.se.com/th/en/product/CR1F2654N7/bistable-contactor-cr1f-4p-ac1-440v-350-a-coil-415-v/","alternativesUrl":"https://aoctrl.com/api/mcp/products/CR1F2654N7/alternatives.json"},"ai":{"faq":[{"question":"What are the key ratings for the CR1F2654N7?","answer":"The CR1F2654N7 is a 4-pole magnetic latching contactor rated 265 A in AC-3 (motor) duty at ≤ 440 V, and 350 A in AC-1 (resistive) duty. The coil is 415 V AC 50/60 Hz, latching on a pulse. Motor power ranges from 75 kW at 220-230 V up to 160 kW at 690 V. Breaking capacity is 2450 A at 440 V for the power circuit."},{"question":"What standards does the CR1F2654N7 comply with?","answer":"It complies with IEC 60947-4, VDE 0660, BS 5424, NF C 63-110, and JEM 1038. The rated insulation voltage is 1000 V per IEC 60947-4 and VDE 0110 group C."},{"question":"How do I source the CR1F2654N7?","answer":"As a current-production part, the CR1F2654N7 is available to order through distribution. Submit an RFQ for pricing and lead time — it is not a surplus or obsolete item requiring broker channels."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/CR1F2654N7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/CR1F2654N7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}