{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"CR1F265GZ7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"CR1F265GZ7","canonicalUrl":"https://aoctrl.com/schneider/CR1F265GZ7","factsUrl":"https://aoctrl.com/api/mcp/products/CR1F265GZ7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys F series, CR1F265GZ7, 3-pole bistable magnetic contactor, AC-3 440 V 265 A, coil 127 V DC, low consumption.","salesMarkdown":"The Schneider Electric CR1F265GZ7 is a 3-pole bistable magnetic contactor from the TeSys F range, rated for switching motor loads up to 265 A in AC-3 duty at 440 V. The \"bistable\" (latching) design means the coil only draws power to change state — 500 W DC for latching, 40 W DC for unlatching — and then holds the contacts magnetically without continuous coil power. This makes it a fit for applications where sustained coil heating is undesirable or where a momentary control pulse is preferred, such as in remote or UPS-backed panels. The headline rating is 265 A in AC-3 (motor switching) at 440 V, but note the part also carries a 350 A rating in AC-1 (resistive) at 40 °C. The AC-3 figure governs motor starting duty; the AC-1 figure governs resistive or lightly inductive loads. Breaking capacity is specified across several voltages: 2450 A at 220…440 V, 2200 A at 500 V, 1700 A at 600…690 V, and 800 A at 1000 V. The control circuit is designed for 127 V DC, with a latching voltage range of 0.85…1.1 Uc and unlatching range of 0.85…1.1 Uc. The coil is low-consumption type, drawing 500 W during the latching pulse and 40 W during the unlatching pulse. This is not a continuous-duty coil; the power is only drawn during the state transition. Mechanical durability is rated at 1,000,000 cycles. Operating time is 45…50 ms for latching and 50…100 ms for unlatching. Power dissipation per pole is 22 W in AC-3 and 39 W in AC-1. This matters for enclosure thermal management — at full AC-1 load, three poles dissipate 117 W, which must be considered in the panel heat budget. Associated fuse ratings for the power circuit are 315 A aM, 400 A BS88, or 400 A gG — these are the maximum recommended fuse sizes for short-circuit protection. The rated insulation voltage (Ui) for the control circuit is 1000 V conforming to IEC 60947-4 and other standards. The bistable coil suits applications where a sustained control signal is not available or where minimizing coil power consumption is a priority. The TH protective treatment indicates suitability for tropical/humid environments. Operating altitude is 3000 m without derating, and ambient temperature range is -15…70 °C.","metaTitle":"Schneider CR1F265GZ7 TeSys F Bistable Contactor, 3P, 265 A A","metaDescription":"Active production TeSys F CR1F265GZ7 magnetic contactor. 3 poles, 265 A AC-3 at 440 V, 127 V DC low-consumption coil. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"213 mm","Range":"TeSys","Width":"201.5 mm","title":"CR1F265GZ7","Height":"370 mm","Coil type":"Low consumption","description":"bistable contactor CR1-F - 3 poles - AC-3 440V 265 A - coil 127 V","Product name":"TeSys F","Operating time":"45...50 ms latching 50...100 ms unlatching","lifecycle_stage":"current","Quantity per set":"Set of 10","Average impedance":"0.32 Ohm - Ith 350 A 50 Hz for control circuit","Device short name":"CR1F","Poles description":"3P","Operating altitude":"3000 m without derating","Operating position":"+/- 5°","Average Consumption":"500 W DC latching 40 W DC unlatching","Protective treatment":"TH","Utilisation category":"AC-1 AC-3","Mechanical durability":"1000000 cycles","Associated fuse rating":"315 A aM for power circuit 400 A BS88 for power circuit 400 A gG for power circuit","Maximum operating rate":"120 cyc/mn 40 °C","Rated breaking capacity":"2200 A at 500 V for power circuit 2450 A at 220...440 V for power circuit 800 A at 1000 V for power circuit 1700 A at 600...690 V for power circuit","Product or component type":"Magnetic contactor","Irms rated making capacity":"2940 A for power circuit","Power dissipation per pole":"22 W AC-3 39 W AC-1","[Uc] control circuit voltage":"127 V DC","[Ui] rated insulation voltage":"Control circuit: 1000 V conforming to BS 775 Control circuit: 1000 V conforming to IEC 60158-1 Control circuit: 1000 V conforming to IEC 60947-4 Control circuit: 1500 V conforming to VDE 0110 group C","Control circuit voltage limits":"Latching: 0.85...1.1 Uc Unlatching: 0.85...1.1 Uc","Power Pole Contact Composition":"3 NO","[Ie] rated operational current":"245 A (at 265 A (at 350 A (at <40 °C) AC/DC AC-1 for power circuit","[Ue] rated operational voltage":"Power circuit: 1000 V AC Power circuit: 1000 V DC","Ambient air temperature for operation":"-15...70 °C","[Ith] conventional free air thermal current":"350 A (at 40 °C) for power circuit"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/23fdd6de51899af75af43adcb6dc11fc.pdf","sourceUrl":"https://www.se.com/uk/en/product/CR1F265GZ7/bistable-contactor-cr1f-3-poles-ac3-440v-265-a-coil-127-v/"},"ai":{"faq":[{"question":"What are the key ratings for the CR1F265GZ7?","answer":"3 poles, rated operational current 265 A in AC-3 at 440 V, 350 A in AC-1 at 40 °C. Coil is 127 V DC, low-consumption bistable type. Mechanical durability 1,000,000 cycles. Breaking capacity up to 2450 A at 220…440 V."},{"question":"What is the physical size of the CR1F265GZ7?","answer":"Height 370 mm, width 201.5 mm, depth 213 mm."},{"question":"What fuse ratings are recommended for the power circuit?","answer":"315 A aM, 400 A BS88, or 400 A gG."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/CR1F265GZ7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/CR1F265GZ7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}