{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"CR1F265R7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"CR1F265R7","canonicalUrl":"https://aoctrl.com/schneider/CR1F265R7","factsUrl":"https://aoctrl.com/api/mcp/products/CR1F265R7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys F CR1F265R7, magnetic latching contactor, 3-pole, 265 A rated operational current, 1000 V insulation voltage, AC-1/AC-3/AC-4 utilisation categories.","salesMarkdown":"The Schneider Electric CR1F265R7 is a TeSys F magnetic latching contactor — a 3-pole device rated for 265 A operational current (AC-3, ≤440 V) and 350 A thermal current (Ith) at 50 Hz, with a 0.32 mOhm average impedance per pole. It holds its closed state without continuous coil power, drawing 1800 VA during the latching pulse and only 12 VA to unlatch, which cuts heat and energy in applications where the contactor stays closed for long periods. Rated insulation voltage is 1000 V (IEC 60947-4), and it handles motor loads from 75 kW at 230 V up to 160 kW at 690 V (AC 50/60 Hz). For UL/CSA circuits, it switches 150 hp at 480 V and 175 hp at 575 V. The contactor covers utilisation categories AC-1 (resistive), AC-3 (squirrel-cage motor start/run), and AC-4 (plugging/inching), so it fits both general switching and demanding motor control. The 265 A AC-3 rating is the figure that governs motor switching — it tells you this contactor can handle a 132 kW motor at 400 V or a 160 kW motor at 690 V under normal starting duty. The AC-1 rating (resistive load) is higher, but for motor control, AC-3 is the binding limit. The latching mechanism is the differentiator here: once pulsed, it holds magnetically with no coil current, so it suits applications where a sustained closed state is needed without continuous power draw — like remote switching stations or energy-sensitive lines. The unlatching pulse is the same 12 VA, so the control circuit only sees a brief load. Operating time is 40–75 ms to latch and 50–100 ms to unlatch. It mounts to a panel or a notched AM1-EC rail — the standard TeSys F footprint. Dimensions are 8.4 in deep, 7.9 in wide, 8.0 in tall (213 x 201.5 x 203 mm). Terminals accept lugs, ring terminals, or bars up to 240 mm² per pole, with a tightening torque of 35 N·m. Ambient operating range is -15 to 70 °C, with no derating up to 3000 m altitude. For power circuit protection, the associated fuse rating is 315 A aM or 400 A gG (≤440 V). Compliant with IEC 60947-4, BS 5424, NF C 63-110, VDE 0660, and JEM 1038 — the key standards for contactors and motor-starters. The TH protective treatment indicates tropicalisation for humid environments.","metaTitle":"Schneider CR1F265R7 TeSys F Magnetic Latching Contactor, 265","metaDescription":"Schneider CR1F265R7 TeSys F magnetic latching contactor, 3-pole, 265 A rated operational current, 1000 V insulation, AC-1/AC-3/AC-4. Active production. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"8.4 in (213 mm)","Range":"TeSys","Width":"7.9 in (201.5 mm)","title":"CR1F265R7","Height":"8.0 in (203 mm)","Category":"22331-CTR,F-LINE,DC,OPEN,NONREV","Standards":"BS 5424 NF C 63-110 IEC 60947-4 VDE 0660 JEM 1038","description":"Bistable contactor CR1-F - 3P - AC-1 440V 265 A - coil 440 V","Product name":"TeSys F","Motor power kW":"147 kW at 1000 V AC 50/60 Hz 160 kW at 690 V AC 50/60 Hz 160 kW at 500...660 V AC 50/60 Hz 140 kW at 440 V AC 50/60 Hz 140 kW at 415 V AC 50/60 Hz 132 kW at 380...400 V AC 50/60 Hz 75 kW at 220...230 V AC 50/60 Hz","Operating time":"40...75 ms latching 50...100 ms unlatching","lifecycle_stage":"current","Mounting Support":"Panel mounting Notched AM1-EC rail","Average impedance":"0.32 mOhm - Ith 350 A 50 Hz","Device short name":"CR1F","Poles description":"3P","Tightening torque":"309.8 lbf.in (35 N.m)","Device Application":"Control","Operating altitude":"9842.52 ft (3000 m) without derating","Average Consumption":"1800 VA AC 50...400 Hz latching 12 VA AC 50...400 Hz unlatching 1800 VA DC latching 12 VA DC unlatching","Protective treatment":"TH","Utilisation category":"AC-1 AC-3 AC-4","Contactor application":"Resistive load Motor control","Mechanical durability":"1 Mcycles","Nbr. of units in pkg.":"1","Associated fuse rating":"315 A aM at 400 A BS88 at 400 A gG at <= 440 V for power circuit","Maximum operating rate":"120 cyc/h 104 °F (40 °C)","Connections - terminals":"lugs-ring terminals 1 0.4 in² (240 mm²) connector 1 0.4 in² (240 mm²) bars 2 32 x 4 mm","IP degree of protection":"IP20 front face IEC 60529","Rated breaking capacity":"2450 A at 220...440 V for power circuit 2200 A at 500 V for power circuit 800 A at 1000 V for power circuit 1700 A at 660/690 V for power circuit","Product or Component Type":"Magnetic latching contactor","motor power HP (UL / CSA)":"175 hp at 575...600 V AC 50/60 Hz for 3 phase motors 150 hp at 460...480 V AC 50/60 Hz for 3 phase motors 75 hp at 220...240 V AC 50/60 Hz for 3 phase motors 60 hp at 200...208 V AC 50/60 Hz for 3 phase motors","Irms rated making capacity":"2940 A for power circuit","Power dissipation per pole":"22 W AC-3 39 W AC-1","[Uc] control circuit voltage":"440 V AC 50/60 Hz","[Ui] rated insulation voltage":"1000 V IEC 60158-1 1000 V IEC 60947-4 1000 V BS 775 1500 V VDE 0110 group C","Control circuit voltage limits":"Latching: 0.85...1.1 Uc Unlatching: 0.85...1.1 Uc","Power Pole Contact Composition":"3 NO","[Ie] rated operational current":"265 A (at 350 A (at 245 A (at <104 °F (40 °C)) at <= 440 V AC AC-4","[Ue] rated operational voltage":"1000 V AC 25...200 Hz","Ambient Air Temperature for Storage":"-76...176 °F (-60...80 °C)","Ambient Air Temperature for Operation":"5...158 °F (-15...70 °C)","[Uimp] rated impulse withstand voltage":"8 kV","[Icw] rated short-time withstand current":"2200 A 104 °F (40 °C) - 1 s 2200 A 104 °F (40 °C) - 5 s 2200 A 104 °F (40 °C) - 10 s 1230 A 104 °F (40 °C) - 30 s 950 A 104 °F (40 °C) - 1 min 620 A 104 °F (40 °C) - 3 min 480 A 104 °F (40 °C) - 10 min","[Ith] conventional free air thermal current":"350 A (at 104 °F (40 °C)) for power circuit"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/576de139c34ec485e8711105d0c9c473.pdf","sourceUrl":"https://www.se.com/vn/en/product/CR1F265R7/bistable-contactor-cr1f-3p-ac1-440v-265-a-coil-440-v/"},"ai":{"faq":[{"question":"What are the key ratings for this contactor?","answer":"Rated operational current is 265 A in AC-3 at ≤440 V, with a thermal current of 350 A. Insulation voltage is 1000 V. It handles motor loads up to 160 kW at 690 V (AC) or 175 hp at 575 V (UL/CSA)."},{"question":"What standards does the CR1F265R7 comply with?","answer":"It complies with IEC 60947-4, BS 5424, NF C 63-110, VDE 0660, and JEM 1038."},{"question":"How does the magnetic latching feature work?","answer":"The contactor uses a magnetic latching mechanism: a 1800 VA pulse (AC or DC) latches it closed, and a 12 VA pulse unlatches it. No coil power is consumed in the held position, reducing heat and energy use."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/CR1F265R7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/CR1F265R7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}