{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"CR1F4004G7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"CR1F4004G7","canonicalUrl":"https://aoctrl.com/schneider/CR1F4004G7","factsUrl":"https://aoctrl.com/api/mcp/products/CR1F4004G7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys F, CR1F4004G7, 4-pole bistable magnetic contactor, 400 A AC-1, 127 V coil.","salesMarkdown":"The Schneider Electric TeSys F CR1F4004G7 is a 4-pole (4 NO) bistable magnetic contactor rated for 400 A at <40 °C in AC-1 utilisation category — that is resistive loads like heaters or lighting banks, not motor starting. The 127 V control circuit (AC 50/60 Hz, AC 400 Hz, or DC) latches and unlatches via a pulsed coil, meaning the contactor holds its state without continuous coil power. Latching pull-in draws up to 1450 VA at 50/60 Hz, while the unlatching pulse is a lower 12 VA; once switched, the coil sits at near-zero steady-state dissipation. The 400 A rated operational current (Ie) at <40 °C in AC-1 is the headline number — it governs the continuous resistive load this contactor can carry. The conventional free-air thermal current (Ith) is 500 A at 40 °C, giving a 25 % headroom above the operational rating for short-term overloads. Rated breaking capacity reaches 4000 A at 220...440 V and 3000 A at 600...690 V, which tells you it can interrupt fault currents up to those levels without welding contacts — important for panel coordination studies. Making capacity is 4500 A rms, sized for closing onto an already-energised load. Operating time is 40...75 ms latching and 50...100 ms unlatching, so expect roughly two line cycles before the main poles settle. The CR1F4004G7 occupies 261 mm width by 375 mm height by 219 mm depth on the panel or mounting plate. The 4-pole block is screw-clamp terminated for power wiring up to the associated fuse rating of 400 A aM or 500 A gG/gG. Coil consumption of 1450 VA latching means the control transformer needs to be sized for that inrush; the 0.85...1.1 Uc voltage limits mean the coil will hold latch down to 108 V on a 127 V nominal supply.","metaTitle":"Schneider Electric TeSys F CR1F4004G7 Bistable Contactor, 40","metaDescription":"Schneider Electric TeSys F CR1F4004G7 4-pole bistable magnetic contactor. Rated 400 A AC-1 at <40 °C, 127 V coil. Active production. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"219 mm","Range":"TeSys","Width":"261 mm","title":"CR1F4004G7","Height":"375 mm","Coil type":"Standard","description":"contacteur bistable CR1F 4P AC1 440V 500 A bobine 127 V","Product name":"TeSys F","Operating time":"40...75 ms latching 50...100 ms unlatching","lifecycle_stage":"current","Average impedance":"0.28 Ohm - Ith 500 A 50 Hz for control circuit","Device short name":"CR1F","Poles description":"4P","Operating altitude":"3000 m without derating","Operating position":"+/- 5°","Average Consumption":"12 VA AC 50/60 Hz unlatching 1450 VA AC 50/60 Hz latching 16 VA AC 400 Hz unlatching 1600 VA AC 400 Hz latching 16 VA DC unlatching 1600 VA DC latching","Protective treatment":"TH","Utilisation category":"AC-1","Mechanical durability":"1000000 cycles","Associated fuse rating":"400 A aM for power circuit 500 A BS88 for power circuit 500 A gG for power circuit","Maximum operating rate":"120 cyc/mn 40 °C","Rated breaking capacity":"1200 A at 1000 V for power circuit 3000 A at 600...690 V for power circuit 3500 A at 500 V for power circuit 4000 A at 220...440 V for power circuit","Product or component type":"Magnetic contactor","Irms rated making capacity":"4500 A for power circuit","Power dissipation per pole":"70 W AC-1","[Uc] control circuit voltage":"127 V DC 127 V AC 400 Hz 127 V AC 50/60 Hz","[Ui] rated insulation voltage":"Control circuit: 1000 V conforming to BS 775 Control circuit: 1000 V conforming to IEC 60158-1 Control circuit: 1000 V conforming to IEC 60947-4 Control circuit: 1500 V conforming to VDE 0110 group C","Control circuit voltage limits":"Latching: 0.85...1.1 Uc Unlatching: 0.85...1.1 Uc","Power Pole Contact Composition":"4 NO","[Ie] rated operational current":"400 A (at <40 °C) AC/DC AC-1 for power circuit","[Ue] rated operational voltage":"Power circuit: 1000 V AC Power circuit: 1000 V DC","Ambient air temperature for operation":"-15...70 °C","[Ith] conventional free air thermal current":"500 A (at 40 °C) for power circuit"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/6997a8008acde39e3bc6b78b5000bd55.pdf","sourceUrl":"https://www.se.com/uk/en/product/CR1F4004G7/contacteur-bistable-cr1f-4p-ac1-440v-500-a-bobine-127-v/"},"ai":{"faq":[{"question":"What coil voltage does the CR1F4004G7 use?","answer":"The control circuit voltage (Uc) is 127 V, available in AC 50/60 Hz, AC 400 Hz, or DC. The coil is standard bistable type — it latches on one pulse and unlatches on a separate pulse."},{"question":"What is the rated current of this contactor?","answer":"The rated operational current (Ie) is 400 A at <40 °C in AC-1 utilisation category (resistive loads). The conventional free-air thermal current (Ith) is 500 A at 40 °C."},{"question":"What compliance documentation is available for this part?","answer":"The control circuit insulation is rated 1000 V per BS 775, IEC 60158-1, and IEC 60947-4, and 1500 V per VDE 0110 group C. The part carries protective treatment TH for tropicalised environments. Specific RoHS/REACH/UL declarations are available through the Schneider Electric documentation portal for the TeSys F range."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/CR1F4004G7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/CR1F4004G7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}