{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"CR1F5004G7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"CR1F5004G7","canonicalUrl":"https://aoctrl.com/schneider/CR1F5004G7","factsUrl":"https://aoctrl.com/api/mcp/products/CR1F5004G7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys F CR1F5004G7, magnetic contactor, 4 poles, AC-1 440 V 700 A, coil 127 V AC/DC, bistable latching, set of 10.","salesMarkdown":"It's a bistable (latching) contactor — meaning the coil only needs power to change state, not to hold it — which cuts continuous power draw and heat in the panel. The 127 V AC/DC control coil covers both 50/60 Hz and 400 Hz supplies, so you can use the same part across different line voltages without swapping coils. For motor switching (AC-3), the rated operational current is 500 A. The contactor is rated for 1000 V AC and 1000 V DC on the power circuit, with a rated insulation voltage of 1000 V conforming to IEC 60947-4 and VDE 0110 group C. That puts it squarely in industrial switchgear territory — suitable for 690 V line-to-line systems common in heavy industry. The rated breaking capacity tells you how much fault current this contactor can interrupt safely: 5000 A at 220–440 V, 4500 A at 500 V, 3560 A at 600–690 V, and 2500 A at 1000 V. That's the contactor's own capability — you still need upstream fuses or a breaker for full short-circuit protection. The associated fuse ratings are 800 A gG or 800 A BS88 for the power circuit, or 500 A aM. Match those to your coordination study. Mechanical durability is 1,000,000 cycles. That's a solid figure for a contactor this size — expect it to outlast the equipment it controls in most cyclic applications. If you're replacing an older TeSys F contactor with a different coil voltage, the CR1F5004G7's 127 V AC/DC coil covers a wide range — just verify your control voltage matches the 0.85–1.1 Uc limits. Mounting position tolerance is ±5° from vertical — not critical for most panels, but worth noting if you're installing in a mobile or tilted enclosure. The protective treatment is TH (tropicalized), meaning it's treated against humidity and fungal growth — a good fit for warm, damp environments like Southeast Asian factories or coastal plants. The control circuit impedance is 0.18 Ω at Ith 700 A, 50 Hz. That low impedance means the coil draws significant inrush current during latching — 1450 VA at 50/60 Hz, 1600 VA at 400 Hz, and 1600 VA DC. Make sure your control transformer or DC supply can handle that peak without voltage sag. The unlatching consumption drops to 12 VA AC or 16 VA DC, so the steady-state load is minimal. Operating time is 40–80 ms for latching and 50–100 ms for unlatching. That's typical for a large DC-operated contactor — not fast enough for arc-flash mitigation, but fine for motor starting and load switching. The ambient temperature range of -15 to 70 °C covers most industrial environments, though you'll want to derate the continuous current above 40 °C.","metaTitle":"Schneider Electric CR1F5004G7 TeSys F Bistable Contactor, 4P","metaDescription":"Active-production TeSys F magnetic contactor CR1F5004G7. 4 poles, 700 A AC-1 at 440 V, 127 V AC/DC coil. Bistable latching. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"232 mm","Range":"TeSys","Width":"288 mm","title":"CR1F5004G7","Height":"400 mm","Coil type":"Standard","description":"bistable contactor CR1-F - 4 poles - AC-1 440V 700 A - coil 127 V","Product name":"TeSys F","Operating time":"40...80 ms latching 50...100 ms unlatching","lifecycle_stage":"current","Quantity per set":"Set of 10","Average impedance":"0.18 Ohm - Ith 700 A 50 Hz for control circuit","Device short name":"CR1F","Poles description":"4P","Operating altitude":"3000 m without derating","Operating position":"+/- 5°","Average Consumption":"12 VA AC 50/60 Hz unlatching 1450 VA AC 50/60 Hz latching 16 VA AC 400 Hz unlatching 1600 VA AC 400 Hz latching 16 VA DC unlatching 1600 VA DC latching","Protective treatment":"TH","Utilisation category":"AC-1 AC-3","Mechanical durability":"1000000 cycles","Associated fuse rating":"800 A BS88 for power circuit 800 A gG for power circuit 500 A aM for power circuit","Maximum operating rate":"120 cyc/mn 40 °C","Rated breaking capacity":"2500 A at 1000 V for power circuit 3560 A at 600...690 V for power circuit 4500 A at 500 V for power circuit 5000 A at 220...440 V for power circuit","Product or component type":"Magnetic contactor","Irms rated making capacity":"5000 A for power circuit","Power dissipation per pole":"45 W AC-3 88 W AC-1","[Uc] control circuit voltage":"127 V DC 127 V AC 400 Hz 127 V AC 50/60 Hz","[Ui] rated insulation voltage":"Control circuit: 1000 V conforming to BS 775 Control circuit: 1000 V conforming to IEC 60158-1 Control circuit: 1000 V conforming to IEC 60947-4 Control circuit: 1500 V conforming to VDE 0110 group C","Control circuit voltage limits":"Latching: 0.85...1.1 Uc Unlatching: 0.85...1.1 Uc","Power Pole Contact Composition":"4 NO","[Ie] rated operational current":"460 A (at 500 A (at 700 A (at <40 °C) AC/DC AC-1 for power circuit","[Ue] rated operational voltage":"Power circuit: 1000 V AC Power circuit: 1000 V DC","Ambient air temperature for operation":"-15...70 °C","[Ith] conventional free air thermal current":"700 A (at 40 °C) for power circuit"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/36f3313658feee3edb170fb058bb272c.pdf","sourceUrl":"https://www.se.com/uk/en/product/CR1F5004G7/bistable-contactor-cr1f-4-poles-ac1-440v-700-a-coil-127-v/"},"ai":{"faq":[{"question":"What are the key ratings for this contactor?","answer":"4 poles, 700 A Ith at 40 °C, 460 A AC-1, 500 A AC-3, coil 127 V AC/DC. Rated breaking capacity up to 5000 A at 440 V. Mechanical durability 1,000,000 cycles."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/CR1F5004G7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/CR1F5004G7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}