{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"CR1F5004GZ7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"CR1F5004GZ7","canonicalUrl":"https://aoctrl.com/schneider/CR1F5004GZ7","factsUrl":"https://aoctrl.com/api/mcp/products/CR1F5004GZ7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider TeSys F magnetic latching contactor, CR1F5004GZ7, 4P, 700 A Ith, 127 V DC low-consumption coil, 335 kW at 690 V.","salesMarkdown":"The Schneider CR1F5004GZ7 is a TeSys F magnetic latching contactor — 4 poles, rated 700 A conventional free air thermal current (Ith) at 40 °C, with a 127 V DC low-consumption coil. Latching means the main contacts hold position without continuous coil power; the coil draws 550 W to latch and 60 W to unlatch, with a typical operating time of 40 to 80 ms latching and 50 to 100 ms unlatching. This is a control-duty contactor (utilisation categories AC-1, AC-3, AC-4) suited for motor control and resistive loads. The 700 A Ith rating means the contactor can carry that current continuously in free air at 40 °C without exceeding its thermal limits. For motor applications, the key figure is the AC-3 rated operational current: 500 A at ≤ 440 V, 460 A at < 40 °C. That translates to motor power ratings across common voltages — 335 kW at 690 V AC, 295 kW at 440 V, 280 kW at 415 V, 250 kW at 380 to 400 V, and 147 kW at 220 to 230 V (all 50/60 Hz). Under UL/CSA, it's rated 500 hp at 575 to 600 V, 400 hp at 460 to 480 V, and 200 hp at 220 to 240 V. Rated operational voltage is 1000 V AC at 25 to 200 Hz, with a rated insulation voltage of 1000 V (conforming to IEC 60158-1, IEC 60947-4, BS 775) and 1500 V per VDE 0110 group C. Impulse withstand voltage is 8 kV — this tells you the contactor can handle transient overvoltages common in industrial power distribution without flashover. The rated short-time withstand current (Icw) is 4200 A for 1, 5, or 10 seconds at 40 °C, stepping down to 3200 A at 30 s, 2400 A at 1 min, 1500 A at 3 min, and 1200 A at 10 min. That's the current the contactor can carry momentarily during a fault without welding or damage, critical for coordination with upstream protective devices. Rated breaking capacity is 5000 A at 220 to 440 V, 4500 A at 500 V, 3560 A at 660/690 V, and 2500 A at 1000 V. Rated making capacity is 5000 A. These numbers define the maximum fault current the contactor can safely interrupt or close into — essential for verifying selectivity in a motor control centre. Associated fuse ratings are 500 A aM, 800 A BS88, and 800 A gG at ≤ 440 V, giving a clear guide for coordination. Average impedance is 0.18 mOhm at 700 A, 50 Hz. Power dissipation per pole is 45 W in AC-3 duty and 88 W in AC-1 — relevant for panel thermal budgeting, especially in enclosed assemblies. This is a large-frame contactor — 288 mm wide, 238 mm high, 232 mm deep. It's not a DIN-rail snap-on; it bolts into a panel or enclosure. Terminals accept lugs or ring terminals for up to two 240 mm² cables per pole, or bars with a busbar cross-section of 40 x 5 mm. Tightening torque is 35 N.m. The contactor has 4 NO power poles (no built-in auxiliary contacts in this variant). Protective treatment is TH (tropicalised, humidity-resistant). The control circuit voltage limits are 0.85 to 1.1 Uc for both latching and unlatching — meaning the 127 V DC coil holds in reliably from about 108 V to 140 V DC.","metaTitle":"Schneider CR1F5004GZ7 TeSys F 4P 700A 127VDC Magnetic Latchi","metaDescription":"Schneider CR1F5004GZ7 TeSys F magnetic latching contactor, 4P, 700 A, 127 V DC coil. Active production. Sourced to order. RFQ for pricing.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"232 mm","Range":"TeSys","Width":"288 mm","Height":"238 mm","Product name":"TeSys F","Motor power kW":"335 kW at 1000 V AC 50/60 Hz 335 kW at 690 V AC 50/60 Hz 335 kW at 500...660 V AC 50/60 Hz 295 kW at 440 V AC 50/60 Hz 280 kW at 415 V AC 50/60 Hz 250 kW at 380...400 V AC 50/60 Hz 147 kW at 220...230 V AC 50/60 Hz","Operating time":"40...80 ms latching 50...100 ms unlatching","lifecycle_stage":"current","Average impedance":"0.18 mOhm - Ith 700 A 50 Hz","Device short name":"CR1F","Poles description":"4P","Tightening torque":"35 N.m","Device application":"Control","Operating altitude":"3000 m without derating","Average Consumption":"550 W DC latching 60 W DC unlatching","Protective treatment":"TH","Utilisation category":"AC-1 AC-4 AC-3","Contactor application":"Motor control Resistive load","Mechanical durability":"1 Mcycles","Associated fuse rating":"500 A aM at 800 A BS88 at 800 A gG at <= 440 V","Maximum operating rate":"120 cyc/h 40 °C","Connections - terminals":"Lugs-ring terminals 2 cable(s) 240 mm² Bars 2 cable(s) - busbar cross section: 40 x 5 mm","Rated breaking capacity":"5000 A at 220...440 V 4500 A at 500 V 2500 A at 1000 V 3560 A at 660/690 V","Product or component type":"Magnetic latching contactor","motor power HP (UL / CSA)":"500 hp at 575...600 V AC 50/60 Hz for 3 phases motors 400 hp at 460...480 V AC 50/60 Hz for 3 phases motors 200 hp at 220...240 V AC 50/60 Hz for 3 phases motors 150 hp at 200...208 V AC 50/60 Hz for 3 phases motors","Irms rated making capacity":"5000 A","Power dissipation per pole":"45 W AC-3 88 W AC-1","[Uc] control circuit voltage":"127 V DC low consumption","[Ui] rated insulation voltage":"1000 V conforming to IEC 60158-1 1000 V conforming to IEC 60947-4 1000 V conforming to BS 775 1500 V conforming to VDE 0110 group C","Control circuit voltage limits":"Latching: 0.85...1.1 Uc Unlatching: 0.85...1.1 Uc","Power Pole Contact Composition":"4 NO","[Ie] rated operational current":"500 A (at 700 A (at 460 A (at <40 °C) at <= 440 V AC AC-4","[Ue] rated operational voltage":"1000 V AC 25...200 Hz","Ambient air temperature for storage":"-60...80 °C","Ambient air temperature for operation":"-15...70 °C","[Uimp] rated impulse withstand voltage":"8 kV","[Icw] rated short-time withstand current":"4200 A 40 °C - 1 s 4200 A 40 °C - 5 s 4200 A 40 °C - 10 s 3200 A 40 °C - 30 s 2400 A 40 °C - 1 min 1500 A 40 °C - 3 min 1200 A 40 °C - 10 min","[Ith] conventional free air thermal current":"700 A (at 40 °C)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/08891f32d41562beffa133b5a4496927.pdf","sourceUrl":"https://www.se.com/th/en/product/CR1F5004GZ7/tesys-f-magnetic-latching-contactor-4p-700-a-127-v-dc-coil-low-consum-/","alternativesUrl":"https://aoctrl.com/api/mcp/products/CR1F5004GZ7/alternatives.json"},"ai":{"faq":[{"question":"What are the key ratings for this contactor?","answer":"The CR1F5004GZ7 is a 4-pole magnetic latching contactor rated 700 A conventional free air thermal current (Ith) at 40 °C, with a 127 V DC low-consumption coil. Motor power ranges from 335 kW at 690 V AC down to 147 kW at 220 to 230 V AC. Rated operational current in AC-3 is 500 A at ≤ 440 V."},{"question":"What is the closest alternative in the TeSys F family?","answer":"Within the TeSys F range, the closest alternative would be a variant with a different coil voltage or pole count. For example, if you need a 4-pole contactor but with a 220 V DC coil, the CR1F5004GZ7's sibling in that coil voltage would be the direct substitute. No pin-compatible drop-in with identical ratings exists outside the TeSys F platform."},{"question":"What compliance documentation does this contactor carry?","answer":"The contactor is rated for insulation voltage conforming to IEC 60158-1, IEC 60947-4, BS 775, and VDE 0110 group C. It carries UL/CSA motor horsepower ratings, confirming UL and CSA listing. RoHS and REACH compliance are standard for Schneider TeSys products, though not explicitly listed in this spec set."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/CR1F5004GZ7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/CR1F5004GZ7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}