{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"CR1F500PF7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"CR1F500PF7","canonicalUrl":"https://aoctrl.com/schneider/CR1F500PF7","factsUrl":"https://aoctrl.com/api/mcp/products/CR1F500PF7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys F, magnetic latching contactor, CR1F500PF7, 3P, 500 A, 230 V & 110 V AC/DC coil, 250 kW at 400 V AC-4.","salesMarkdown":"The Schneider CR1F500PF7 is a TeSys F magnetic latching contactor — a three-pole, normally-open power switching device rated for 500 A in AC-4 duty (250 kW at 400 V AC, 50/60 Hz). Magnetic latching means the coil draws power only to change state — 1800 VA on latching, 13 VA on unlatching — then holds position magnetically without continuous coil current. This makes it suited for applications where sustained hold-in power is undesirable or unavailable. The control circuit accepts both AC and DC at 110 V or 230 V (50...400 Hz for AC), with latching and unlatching voltage limits of 0.85...1.1 Uc. This contactor is a bolted-down unit — power connections use lugs, ring terminals (up to 2× 240 mm² cable per pole), or busbars up to 40×5 mm cross-section. Tightening torque is 35 N.m on the power circuit connections. Dimensions are 238 mm high × 233 mm wide × 232 mm deep. It is not a DIN-rail snap-on device; plan for direct panel mounting with clearance for bolted busbar connections and cable bending radius. For AC-3 (running start/stop of squirrel-cage motors) the thermal current Ith is 700 A, and the contactor is also rated for AC-1 resistive loads. Breaking capacity is 5000 A at 220...440 V, derating to 2500 A at 1000 V. Short-time withstand (Icw) is 4200 A for up to 10 seconds at 40 °C, tapering to 1200 A for 10 minutes — useful for coordinating with upstream protective devices. Power dissipation runs 45 W per pole in AC-3 and 88 W per pole in AC-1 — factor that into enclosure thermal calculations, especially at the 120 cycles/hour maximum operating rate at 40 °C. If you are evaluating a migration, the TeSys F series has been superseded by later TeSys ranges, but no pin-for-pin or footprint-identical drop-in replacement is documented for this specific latching variant. A panel re-engineering may be required to accommodate a modern equivalent.","metaTitle":"Schneider CR1F500PF7 TeSys F Magnetic Latching Contactor, 50","metaDescription":"Obsolete Schneider CR1F500PF7 TeSys F magnetic latching contactor, 3P, 500 A AC-4 rated, 250 kW at 400 V. Sourced to order against RFQ via independent channels.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"232 mm","Range":"TeSys","Width":"233 mm","Height":"238 mm","Product name":"TeSys F","Motor power kW":"250 kW at 400 V AC 50/60 Hz (AC-4)","Operating time":"40...80 ms latching 50...100 ms unlatching","lifecycle_stage":"current","Average impedance":"0.18 mOhm - Ith 700 A 50 Hz","Device short name":"CR1F","Poles description":"3P","Tightening torque":"35 N.m","Device application":"Control","Operating altitude":"3000 m without derating","Average Consumption":"1800 VA AC 50...400 Hz latching 13 VA AC 50...400 Hz unlatching 1800 VA DC latching 13 VA DC unlatching","Protective treatment":"TC","Utilisation category":"AC-4 AC-3 AC-1","Contactor application":"Motor control Resistive load","Mechanical durability":"1 Mcycles","Associated fuse rating":"500 A aM at 800 A BS88 at 800 A gG at <= 440 V","Maximum operating rate":"120 cyc/h 40 °C","Connections - terminals":"Lugs-ring terminals 2 cable(s) 240 mm² Bars 2 cable(s) - busbar cross section: 40 x 5 mm Power circuit: bolted connection","Rated breaking capacity":"5000 A at 220...440 V 4500 A at 500 V 2500 A at 1000 V 3560 A at 660/690 V","Product or component type":"Magnetic latching contactor","Irms rated making capacity":"5000 A","Power dissipation per pole":"45 W AC-3 88 W AC-1","[Uc] control circuit voltage":"230 V AC 50...400 Hz 110 V AC 50...400 Hz 230 V DC 110 V DC","[Ui] rated insulation voltage":"1000 V conforming to IEC 60158-1 1000 V conforming to IEC 60947-4 1000 V conforming to BS 775 1500 V conforming to VDE 0110 group C","Control circuit voltage limits":"Latching: 0.85...1.1 Uc Unlatching: 0.85...1.1 Uc","Power Pole Contact Composition":"3 NO","[Ie] rated operational current":"500 A (at 700 A (at 460 A (at <40 °C) at <= 440 V AC AC-4","[Ue] rated operational voltage":"1000 V AC 25...200 Hz","Ambient air temperature for storage":"-60...80 °C","Ambient air temperature for operation":"-15...70 °C","[Icw] rated short-time withstand current":"4200 A 40 °C - 1 s 4200 A 40 °C - 5 s 4200 A 40 °C - 10 s 3200 A 40 °C - 30 s 2400 A 40 °C - 1 min 1500 A 40 °C - 3 min 1200 A 40 °C - 10 min"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/509df85290b708290d12da19b30c94ad.pdf","sourceUrl":"https://www.se.com/th/en/product/CR1F500PF7/tesys-f-magnetic-latching-contactor-3p3-no-500-a-230-v-110-v-ac-dc-coil/","alternativesUrl":"https://aoctrl.com/api/mcp/products/CR1F500PF7/alternatives.json"},"ai":{"faq":[{"question":"What are the key ratings of the CR1F500PF7?","answer":"It is a 3-pole magnetic latching contactor rated 500 A in AC-4 duty (250 kW at 400 V), with control voltages of 110 V or 230 V AC/DC. Breaking capacity is 5000 A at 220...440 V, and short-time withstand is 4200 A for up to 10 seconds."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/CR1F500PF7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/CR1F500PF7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}