{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"CR1F6304F7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"CR1F6304F7","canonicalUrl":"https://aoctrl.com/schneider/CR1F6304F7","factsUrl":"https://aoctrl.com/api/mcp/products/CR1F6304F7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys F CR1F6304F7, magnetic contactor, 4-pole, AC-1 1000 A at 440 V, coil 110 V AC/DC, obsolete.","salesMarkdown":"The Schneider Electric CR1F6304F7 is a TeSys F series magnetic contactor — a bistable (latching) 4-pole device rated for 1000 A in AC-1 duty at 440 V, with a 110 V AC/DC control coil. It switches resistive and motor loads (AC-1 and AC-3 utilisation categories) in heavy industrial panels. The latching coil draws 2100 VA at 50/60 Hz during the latching pulse; unlatching consumption is 8 VA at 50/60 Hz. The 1000 A AC-1 rating (resistive load) is the headline figure — this contactor is sized for high-current switching in heater banks, power distribution, or large transformer primaries. The AC-3 rating for motor duty is lower (630 A at <40 °C), which governs its use on induction motors. Power dissipation per pole runs 120 W in AC-1 and 48 W in AC-3 — this drives enclosure ventilation requirements. The 1000 A gG or BS88 fuse recommendation for the power circuit sets the upstream protection coordination. The control circuit accepts 110 V AC (50/60 Hz or 400 Hz) or 110 V DC, with a latching voltage tolerance of 0.85...1.1 Uc. The unlatching coil draws only 8 VA at 50/60 Hz — a low holding power after the latching pulse. Operating time is 40...80 ms for latching, 50...100 ms for unlatching. The CR1F6304F7 is a panel-mount contactor, not DIN-rail snap-on — it bolts into a backplate. Dimensions are 464 mm high by 309 mm wide by 255 mm deep. The TH protective treatment (tropicalisation) suits environments with humidity or condensation. Operating altitude is 3000 m without derating, and the ambient temperature range is -15 to 70 °C. Rated insulation voltage (Ui) is 1000 V for the control circuit per IEC 60947-4 and BS 775, with a 1500 V rating per VDE 0110 group C — confirming its suitability for 690 V line-to-line systems with adequate clearance. The 4-pole, 1000 A AC-1, 110 V coil configuration is specific — a direct drop-in from current TeSys F production may not exist without a control voltage or pole-count change.","metaTitle":"Schneider CR1F6304F7 TeSys F Bistable Contactor, 1000 A, 110","metaDescription":"Obsolete Schneider CR1F6304F7 TeSys F magnetic contactor. 4-pole, AC-1 1000 A at 440 V, 110 V AC/DC coil. Sourced to order against RFQ. Confirm fit before specifying.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"255 mm","Range":"TeSys","Width":"309 mm","Height":"464 mm","Coil type":"Standard","Product name":"TeSys F","Operating time":"40...80 ms latching 50...100 ms unlatching","lifecycle_stage":"current","Quantity per set":"Set of 10","Average impedance":"0.12 Ohm - Ith 1000 A 50 Hz for control circuit","Device short name":"CR1F","Poles description":"4P","Operating altitude":"3000 m without derating","Operating position":"+/- 5°","Average Consumption":"11 VA AC 400 Hz unlatching 8 VA AC 50/60 Hz unlatching 11 VA DC unlatching 2100 VA AC 50/60 Hz latching 2300 VA AC 400 Hz latching 2300 VA DC latching","Protective treatment":"TH","Utilisation category":"AC-1 AC-3","Mechanical durability":"1000000 cycles","Associated fuse rating":"1000 A BS88 for power circuit 1000 A gG for power circuit 630 A aM for power circuit","Maximum operating rate":"120 cyc/mn 40 °C","Rated breaking capacity":"3200 A at 1000 V for power circuit 4600 A at 600...690 V for power circuit 5400 A at 500 V for power circuit 6300 A at 220...440 V for power circuit","Product or component type":"Magnetic contactor","Irms rated making capacity":"6740 A for power circuit","Power dissipation per pole":"120 W AC-1 48 W AC-3","[Uc] control circuit voltage":"110 V AC 400 Hz 110 V AC 50/60 Hz 110 V DC","[Ui] rated insulation voltage":"Control circuit: 1000 V conforming to BS 775 Control circuit: 1000 V conforming to IEC 60158-1 Control circuit: 1000 V conforming to IEC 60947-4 Control circuit: 1500 V conforming to VDE 0110 group C","Control circuit voltage limits":"Latching: 0.85...1.1 Uc Unlatching: 0.85...1.1 Uc","Power Pole Contact Composition":"4 NO","[Ie] rated operational current":"1000 A (at 560 A (at 630 A (at <40 °C) AC/DC AC-3 for power circuit","[Ue] rated operational voltage":"Power circuit: 1000 V AC Power circuit: 1000 V DC","Ambient air temperature for operation":"-15...70 °C","[Ith] conventional free air thermal current":"1000 A (at 40 °C) for power circuit"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/17039e4c7ff4d8344664b155251c7c5d.pdf","sourceUrl":"https://www.se.com/uk/en/product/CR1F6304F7/bistable-contactor-cr1f-4-poles-ac1-440v-1000-a-coil-110-v/","alternativesUrl":"https://aoctrl.com/api/mcp/products/CR1F6304F7/alternatives.json"},"ai":{"faq":[{"question":"What are the key ratings of the CR1F6304F7?","answer":"It is a 4-pole magnetic contactor rated 1000 A in AC-1 (resistive) duty at 440 V, with a 110 V AC/DC latching coil. The power circuit handles up to 1000 V AC/DC. The conventional free-air thermal current (Ith) is 1000 A at 40 °C."},{"question":"What is the closest alternative to the CR1F6304F7?","answer":"No official successor order code is listed in the manufacturer's records. A current-production TeSys F contactor with matching pole count, current rating, and control voltage would need to be verified against the specific installation — there is no documented pin-compatible drop-in replacement."},{"question":"What compliance documentation is available for the CR1F6304F7?","answer":"The part carries insulation voltage ratings conforming to IEC 60947-4, BS 775, and VDE 0110 group C. The evidence does not list RoHS, REACH, or UL specific certifications for this order code. Verify compliance documentation with the supplier at time of RFQ."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/CR1F6304F7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/CR1F6304F7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}