{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"CR1F630EZ7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"CR1F630EZ7","canonicalUrl":"https://aoctrl.com/schneider/CR1F630EZ7","factsUrl":"https://aoctrl.com/api/mcp/products/CR1F630EZ7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys F series, magnetic latching contactor, CR1F630EZ7, 3-pole, 630 A rated operational current, 1000 V AC, 48 V DC coil.","salesMarkdown":"It's built for heavy motor and resistive load switching in control panels where maintaining contactor state without continuous coil power is critical. The latching mechanism holds position magnetically, so the coil only draws power during the 40...80 ms latching or 50...100 ms unlatching pulse, then drops to zero holding current. Rated operational current (Ie) is 630 A at 1000 V in AC-4 duty — that's the severe switching category for plugging and inching of motors, not just running. In AC-3 (normal motor start/run) the same 630 A carries through. The conventional free-air thermal current (Ith) is 1000 A at 40 °C, which gives thermal headroom for busbar connections and continuous resistive loads. Motor power capability spans 450 kW at 690 V up to 800 hp at 575...600 V per UL/CSA — so it covers a wide range of large induction motors without needing to oversize. Rated breaking capacity hits 6300 A at 220...440 V, tapering to 3200 A at 1000 V. That's the fault it can interrupt without welding or failing. The rated short-time withstand current (Icw) is 5050 A for up to 10 seconds — enough to ride through downstream short-circuit clearing without the contactor itself tripping. Associated fuse rating is 630 A aM or gG, so coordination with upstream protection is straightforward. The 48 V DC low-consumption coil draws 620 W during the latching pulse and 45 W on unlatching — substantial for a few milliseconds, then zero. Control voltage limits are 0.85...1.1 Uc for both latching and unlatching, so a saggy 48 V bus at 40.8 V still picks it up. Rated insulation voltage (Ui) is 1000 V per IEC 60947-4, with impulse withstand (Uimp) at 8 kV. That means it's insulated for 1000 V line-to-line and survives surge events typical in industrial distribution. This is a panel-mount contactor — no DIN rail clip. Terminals are busbars sized for two 60 x 5 mm bars per pole, tightened to 58 N·m. The enclosure cutout needs to clear 12.2 in (309 mm) width, 12.0 in (304 mm) height, and 10.04 in (255 mm) depth. It's TH protective-treated, meaning it's coated for tropical/humid environments — think textile mills, wastewater, or outdoor substations without climate control. Operating temperature range is -15 to 70 °C, storage down to -60 °C. Maximum operating rate is 120 cycles per hour at 40 °C — about one operation every 30 seconds. That's fine for motor starting duty; not for high-speed jogging or rapid cycling. Mechanical durability is 1 million cycles, which for a contactor this size is typical for a long service life in process applications. Rated insulation voltage is certified to IEC 60947-4, IEC 60158-1, BS 775, and VDE 0110. The UL/CSA motor power ratings (800 hp at 575...600 V) confirm North American acceptance.","metaTitle":"Schneider Electric TeSys F CR1F630EZ7 Magnetic Latching Cont","metaDescription":"Schneider Electric TeSys F CR1F630EZ7 magnetic latching contactor, 630 A rated operational current, 1000 V AC, 3-pole, 48 V DC coil. Current production. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"10.04 in (255 mm)","Range":"TeSys","Width":"12.2 in (309 mm)","title":"CR1F630EZ7","Height":"12.0 in (304 mm)","Category":"22331-CTR,F-LINE,DC,OPEN,NONREV","description":"TeSys F magnetic latching contactor - 3P - 630 A - 48 V DC coil - low consum.","Product name":"TeSys F","Motor power kW":"450 kW at 1000 V AC 50/60 Hz 450 kW at 690 V AC 50/60 Hz 400 kW at 500...660 V AC 50/60 Hz 400 kW at 440 V AC 50/60 Hz 375 kW at 415 V AC 50/60 Hz 335 kW at 380...400 V AC 50/60 Hz 200 kW at 220...230 V AC 50/60 Hz","Operating time":"40...80 ms latching 50...100 ms unlatching","lifecycle_stage":"current","Average impedance":"0.12 mOhm - Ith 1000 A 50 Hz","Device short name":"CR1F","Poles description":"3P","Tightening torque":"513.3 lbf.in (58 N.m)","Device Application":"Control","Operating altitude":"9842.52 ft (3000 m) without derating","Average Consumption":"620 W DC latching 45 W DC unlatching","Protective treatment":"TH","Utilisation category":"AC-3 AC-4 AC-1","Contactor application":"Resistive load Motor control","Mechanical durability":"1 Mcycles","Nbr. of units in pkg.":"1","Associated fuse rating":"630 A aM at 1000 A BS88 at 1000 A gG at <= 440 V","Maximum operating rate":"120 cyc/h 104 °F (40 °C)","Connections - terminals":"bars 2 60 x 5 mm","Rated breaking capacity":"6300 A at 220...440 V 5400 A at 500 V 3200 A at 1000 V 4600 A at 660/690 V","Product or Component Type":"Magnetic latching contactor","motor power HP (UL / CSA)":"800 hp at 575...600 V AC 50/60 Hz for 3 phase motors 600 hp at 460...480 V AC 50/60 Hz for 3 phase motors 300 hp at 220...240 V AC 50/60 Hz for 3 phase motors 250 hp at 200...208 V AC 50/60 Hz for 3 phase motors","Irms rated making capacity":"6740 A","Power dissipation per pole":"48 W AC-3 120 W AC-1","[Uc] control circuit voltage":"48 V DC low consumption","[Ui] rated insulation voltage":"1000 V IEC 60158-1 1000 V IEC 60947-4 1000 V BS 775 1500 V VDE 0110 group C","Control circuit voltage limits":"Latching: 0.85...1.1 Uc Unlatching: 0.85...1.1 Uc","Power Pole Contact Composition":"3 NO","[Ie] rated operational current":"630 A (at 1000 A (at 560 A (at <104 °F (40 °C)) at <= 440 V AC AC-4","[Ue] rated operational voltage":"1000 V AC 25...200 Hz","Ambient Air Temperature for Storage":"-76...176 °F (-60...80 °C)","Ambient Air Temperature for Operation":"5...158 °F (-15...70 °C)","[Uimp] rated impulse withstand voltage":"8 kV","[Icw] rated short-time withstand current":"4400 A 104 °F (40 °C) - 30 s 3400 A 104 °F (40 °C) - 1 min 2200 A 104 °F (40 °C) - 3 min 1600 A 104 °F (40 °C) - 10 min 5050 A 104 °F (40 °C) - 1 s 5050 A 104 °F (40 °C) - 5 s 5050 A 104 °F (40 °C) - 10 s","[Ith] conventional free air thermal current":"1000 A (at 104 °F (40 °C))"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/c0a543bdd637015eba3d6f50aad6d4dd.pdf","sourceUrl":"https://www.se.com/sg/en/product/CR1F630EZ7/tesys-f-magnetic-latching-contactor-3p-630-a-48-v-dc-coil-low-consum-/"},"ai":{"faq":[{"question":"What is the closest pin-compatible alternative to CR1F630EZ7 in this component family?","answer":"Within the TeSys F family, the standard (non-latching) contactor with the same frame size and 630 A rating shares the same physical footprint and busbar terminal layout. The CR1F630EZ7 is specifically magnetic latching — if you don't need the zero-hold-current feature, the standard version is a direct mechanical fit."},{"question":"What is CR1F630EZ7's listed depth?","answer":"The depth is 10.04 inches (255 mm). Combined with the 12.2 in (309 mm) width and 12.0 in (304 mm) height, plan the panel cutout accordingly."},{"question":"What is CR1F630EZ7's listed range?","answer":"It belongs to the TeSys F range, Schneider Electric's heavy-duty contactor and motor-starting product family for high-current applications."},{"question":"What compliance documentation does this brand provide for CR1F630EZ7?","answer":"The contactor carries IEC 60947-4, IEC 60158-1, BS 775, and VDE 0110 rated insulation voltage certifications. UL/CSA motor power ratings are listed for North American acceptance. TH protective treatment indicates compliance with tropical environment standards."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/CR1F630EZ7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/CR1F630EZ7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}