{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"CR1F630FZ7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"CR1F630FZ7","canonicalUrl":"https://aoctrl.com/schneider/CR1F630FZ7","factsUrl":"https://aoctrl.com/api/mcp/products/CR1F630FZ7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys F, magnetic latching contactor, 3P (3 NO), 630 A, 335 kW at 400 V AC AC-4, 110 V DC coil, CR1F630FZ7.","salesMarkdown":"The CR1F630FZ7 is a Schneider Electric TeSys F magnetic latching contactor, 3-pole (3 NO), rated for 630 A operational current in AC-4 duty at <= 440 V, 40 °C. That AC-4 rating — 335 kW at 400 V AC — governs plugging and inching of squirrel-cage motors, the hardest switching duty for a contactor because it makes and breaks locked-rotor current. The 630 A frame also carries AC-1 (resistive) and AC-3 (motor start/run) utilisation categories, so it handles furnace banks or conveyor drives, but the AC-4 number is the one that decides fit for reversing or jogging applications. Rated breaking capacity reaches 6300 A at 220...440 V, and the rated making capacity (Irms) is 6740 A. Short-time withstand current (Icw) holds 5.05 kA for 10 seconds at 40 °C — enough headroom for selective coordination with upstream moulded-case breakers. Insulation voltage (Ui) is rated 1000 V per IEC 60947-4 and BS 775, and 1500 V per VDE 0110 group C. ## Control circuit and latching behaviour The coil is 110 V DC, low-consumption type. Latching consumes 620 W DC; unlatching draws 45 W DC. Operating time is 40...80 ms for latching, 50...100 ms for unlatching. The control voltage limits are 0.85...1.1 Uc for both latching and unlatching, so the coil holds in at 93.5 V DC and drops out predictably below that. This is a magnetic latching contactor — it uses a permanent magnet to hold the contacts closed after the coil pulse, so it does not require continuous coil power to stay engaged. That makes it suitable for battery-backed or UPS-fed circuits where sustained coil draw is a concern. Average impedance per pole is 0.12 mOhm at Ith 1000 A, 50 Hz. Power dissipation per pole runs 48 W in AC-3 and 120 W in AC-1 — the resistive load curve generates more heat because of the longer arcing time on break. Mechanical durability is 1 million cycles; maximum operating rate is 120 cycles per hour at 40 °C. ## Mounting, connections, and environment Power circuit connections are bolted bars — two 60 x 5 mm bars per pole. Tightening torque is 513.3 lbf.in (58 N.m). The contactor is a panel-mount unit, not DIN-rail; the bolted bus bars suit switchboard or motor control centre (MCC) backplates where high-current bus runs are standard. Dimensions are 12.2 in (309 mm) wide, 12.0 in (304 mm) high, 10.04 in (255 mm) deep. Ambient air temperature for operation is 5...158 °F (-15...70 °C); storage range is -76...176 °F (-60...80 °C). Operating altitude is 9842.52 ft (3000 m) without derating. The protective treatment is TC (tropicalised coating) for humidity and corrosive atmospheres.","metaTitle":"TeSys F CR1F630FZ7 Magnetic Latching Contactor, 630 A, 335 k","metaDescription":"Schneider TeSys F CR1F630FZ7 magnetic latching contactor, 3P, 630 A, 335 kW at 400 V AC-4, 110 V DC coil. Current production. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"10.04 in (255 mm)","Range":"TeSys","Width":"12.2 in (309 mm)","title":"CR1F630FZ7","Height":"12.0 in (304 mm)","Category":"22331-CTR,F-LINE,DC,OPEN,NONREV","description":"TeSys F magnetic latching contactor - 3P(3 NO) - 630 A - 110 V DC coil","Product name":"TeSys F","Motor power kW":"335 kW at 400 V AC 50/60 Hz (AC-4)","Operating time":"40...80 ms latching 50...100 ms unlatching","lifecycle_stage":"current","Average impedance":"0.12 mOhm - Ith 1000 A 50 Hz","Device short name":"CR1F","Poles description":"3P","Tightening torque":"513.3 lbf.in (58 N.m)","Device Application":"Control","Operating altitude":"9842.52 ft (3000 m) without derating","Average Consumption":"620 W DC latching 45 W DC unlatching","Control circuit type":"DC low consumption","Protective treatment":"TC","Utilisation category":"AC-4 AC-1 AC-3","Contactor application":"Motor control Resistive load","Mechanical durability":"1 Mcycles","Nbr. of units in pkg.":"1","Associated fuse rating":"630 A aM at 1000 A BS88 at 1000 A gG at <= 440 V","Maximum operating rate":"120 cyc/h 104 °F (40 °C)","Connections - terminals":"bars 2 60 x 5 mm Power circuit bolted connection","Rated breaking capacity":"6300 A at 220...440 V 5400 A at 500 V 3200 A at 1000 V 4600 A at 660/690 V","Product or Component Type":"Magnetic latching contactor","Irms rated making capacity":"6740 A","Power dissipation per pole":"48 W AC-3 120 W AC-1","[Uc] control circuit voltage":"110 V DC","[Ui] rated insulation voltage":"1000 V IEC 60158-1 1000 V IEC 60947-4 1000 V BS 775 1500 V VDE 0110 group C","Control circuit voltage limits":"Latching: 0.85...1.1 Uc Unlatching: 0.85...1.1 Uc","Power Pole Contact Composition":"3 NO","[Ie] rated operational current":"630 A (at 1000 A (at 560 A (at <104 °F (40 °C)) at <= 440 V AC AC-4","[Ue] rated operational voltage":"1000 V AC 25...200 Hz","Ambient Air Temperature for Storage":"-76...176 °F (-60...80 °C)","Ambient Air Temperature for Operation":"5...158 °F (-15...70 °C)","[Icw] rated short-time withstand current":"5.05 kA 104 °F (40 °C) - 1 s 5.05 kA 104 °F (40 °C) - 5 s 5.05 kA 104 °F (40 °C) - 10 s 4400 A 104 °F (40 °C) - 30 s 3400 A 104 °F (40 °C) - 1 min 2200 A 104 °F (40 °C) - 3 min 1600 A 104 °F (40 °C) - 10 min"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/6298418c706c62df8d800d9db6b11c79.pdf","sourceUrl":"https://www.se.com/us/en/product/CR1F630FZ7/tesys-f-magnetic-latching-contactor-3p3-no-630-a-110-v-dc-coil/"},"ai":{"faq":[{"question":"What is the closest alternative to the CR1F630FZ7 in the TeSys family?","answer":"There is no official pin-compatible alternative listed. The CR1F630FZ7 is the specific 630 A, 3-pole, 110 V DC latching variant in the TeSys F range. Any substitution would require verifying the coil voltage, pole count, and AC-4 rating against the application."},{"question":"What is the depth of the CR1F630FZ7?","answer":"The depth is 10.04 inches (255 mm)."},{"question":"What is the product range of the CR1F630FZ7?","answer":"It belongs to the Schneider Electric TeSys range, specifically the TeSys F series."},{"question":"What compliance documentation is available for the CR1F630FZ7?","answer":"The part carries IEC 60947-4, IEC 60158-1, BS 775, and VDE 0110 group C ratings for insulation voltage. The evidence does not list specific RoHS, REACH, or UL documentation, but the VDE and IEC certifications confirm it meets European and international standards for industrial controlgear."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/CR1F630FZ7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/CR1F630FZ7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}