{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"CR1F630GZ7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"CR1F630GZ7","canonicalUrl":"https://aoctrl.com/schneider/CR1F630GZ7","factsUrl":"https://aoctrl.com/api/mcp/products/CR1F630GZ7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys F CR1F630GZ7, magnetic latching contactor, 3-pole, 630 A rated operational current in AC-4, 1000 V AC, 127 V DC low-consumption coil.","salesMarkdown":"This makes it a fit for applications where sustained coil draw is undesirable, such as battery-backed or UPS-fed control circuits, or where heat dissipation in the panel is a concern. It is a 3-pole, normally-open device rated for control applications. That 630 A AC-4 rating means it handles the high-stress switching of motor reversal and jogging without accelerated contact wear. Motor power capability spans the voltage range: 450 kW at 690 V AC, 400 kW at 440 V, 375 kW at 415 V, 335 kW at 400 V, and 200 kW at 230 V. For UL/CSA installations, horsepower ratings are 800 hp at 575-600 V, 600 hp at 460-480 V, 300 hp at 220-240 V, and 250 hp at 200-208 V, all for 3-phase motors. This gives a clear selection path regardless of the regional standard. Rated insulation voltage is 1000 V per IEC 60947-4 and BS 775, with an impulse withstand voltage of 8 kV. That 1000 V Ui means the contactor is designed for 690 V line-to-line systems with margin, and the 8 kV impulse rating ensures it survives transient overvoltages common in industrial distribution without flashover. Short-time withstand current (Icw) is 5050 A for 1 second at 40 °C, tapering to 1600 A for 10 minutes. This defines how long the contactor can carry fault current while upstream protection clears — critical for selectivity coordination with fuses or breakers. The associated fuse rating is 630 A aM or gG, which sets the maximum overcurrent protection the contactor is tested with. Rated breaking capacity reaches 6300 A at 220-440 V, dropping to 3200 A at 1000 V. Control circuit is 127 V DC low-consumption type. Latching and unlatching both operate reliably between 85% and 110% of Uc. Average consumption is 620 W during the latching pulse and 45 W during unlatching — but remember, this is pulse power only; steady-state coil draw is zero once latched. Operating time is 40-80 ms to latch, 50-100 ms to unlatch. This is a panel-mount contactor, not DIN-rail — the TeSys F frame size is bolted directly to a backplate or mounting chassis. Dimensions are substantial: 12.2 in (309 mm) wide, 12.0 in (304 mm) high, 10.04 in (255 mm) deep. Terminal connections are via bars sized 60 x 5 mm, torqued to 513.3 lbf·in (58 N·m). The protective treatment is TH (tropicalized) for humid environments. Utilisation categories cover AC-1 (resistive), AC-3 (motor start/run), and AC-4 (plugging/inching) — so it is suited for both straightforward motor starting and the most severe reversing duty.","metaTitle":"CR1F630GZ7 TeSys F Magnetic Latching Contactor, 630 A AC-4,","metaDescription":"Schneider Electric TeSys F CR1F630GZ7 magnetic latching contactor. 630 A rated operational current in AC-4, 450 kW motor power at 690 V. 127 V DC low-consumption coil. Current life","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"10.04 in (255 mm)","Range":"TeSys","Width":"12.2 in (309 mm)","title":"CR1F630GZ7","Height":"12.0 in (304 mm)","Category":"22331-CTR,F-LINE,DC,OPEN,NONREV","description":"TeSys F magnetic latching contactor - 3P - 630 A - 127 V DC coil - low consum.","Product name":"TeSys F","Motor power kW":"450 kW at 1000 V AC 50/60 Hz 450 kW at 690 V AC 50/60 Hz 400 kW at 500...660 V AC 50/60 Hz 400 kW at 440 V AC 50/60 Hz 375 kW at 415 V AC 50/60 Hz 335 kW at 380...400 V AC 50/60 Hz 200 kW at 220...230 V AC 50/60 Hz","Operating time":"40...80 ms latching 50...100 ms unlatching","lifecycle_stage":"current","Average impedance":"0.12 mOhm - Ith 1000 A 50 Hz","Device short name":"CR1F","Poles description":"3P","Tightening torque":"513.3 lbf.in (58 N.m)","Device Application":"Control","Operating altitude":"9842.52 ft (3000 m) without derating","Average Consumption":"620 W DC latching 45 W DC unlatching","Protective treatment":"TH","Utilisation category":"AC-4 AC-1 AC-3","Contactor application":"Resistive load Motor control","Mechanical durability":"1 Mcycles","Nbr. of units in pkg.":"1","Associated fuse rating":"630 A aM at 1000 A BS88 at 1000 A gG at <= 440 V","Maximum operating rate":"120 cyc/h 104 °F (40 °C)","Connections - terminals":"bars 2 60 x 5 mm","Rated breaking capacity":"6300 A at 220...440 V 5400 A at 500 V 3200 A at 1000 V 4600 A at 660/690 V","Product or Component Type":"Magnetic latching contactor","motor power HP (UL / CSA)":"800 hp at 575...600 V AC 50/60 Hz for 3 phase motors 600 hp at 460...480 V AC 50/60 Hz for 3 phase motors 300 hp at 220...240 V AC 50/60 Hz for 3 phase motors 250 hp at 200...208 V AC 50/60 Hz for 3 phase motors","Irms rated making capacity":"6740 A","Power dissipation per pole":"48 W AC-3 120 W AC-1","[Uc] control circuit voltage":"127 V DC low consumption","[Ui] rated insulation voltage":"1000 V IEC 60158-1 1000 V IEC 60947-4 1000 V BS 775 1500 V VDE 0110 group C","Control circuit voltage limits":"Latching: 0.85...1.1 Uc Unlatching: 0.85...1.1 Uc","Power Pole Contact Composition":"3 NO","[Ie] rated operational current":"630 A (at 1000 A (at 560 A (at <104 °F (40 °C)) at <= 440 V AC AC-4","[Ue] rated operational voltage":"1000 V AC 25...200 Hz","Ambient Air Temperature for Storage":"-76...176 °F (-60...80 °C)","Ambient Air Temperature for Operation":"5...158 °F (-15...70 °C)","[Uimp] rated impulse withstand voltage":"8 kV","[Icw] rated short-time withstand current":"4400 A 104 °F (40 °C) - 30 s 3400 A 104 °F (40 °C) - 1 min 2200 A 104 °F (40 °C) - 3 min 1600 A 104 °F (40 °C) - 10 min 5050 A 104 °F (40 °C) - 1 s 5050 A 104 °F (40 °C) - 5 s 5050 A 104 °F (40 °C) - 10 s","[Ith] conventional free air thermal current":"1000 A (at 104 °F (40 °C))"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/c7c0b73d0ec49d940cb6be02a09bfcc7.pdf","sourceUrl":"https://www.se.com/us/en/product/CR1F630GZ7/tesys-f-magnetic-latching-contactor-3p-630-a-127-v-dc-coil-low-consum-/"},"ai":{"faq":[{"question":"What are the key ratings I need to check for fit?","answer":"The headline rating is 630 A in AC-4 duty at up to 1000 V AC. Motor power is 450 kW at 690 V (800 hp at 575-600 V for UL/CSA). The control circuit is 127 V DC low-consumption latching type. Conventional free-air thermal current is 1000 A at 40 °C. These are the figures that govern the selection."},{"question":"What compliance documentation is available for this part?","answer":"The contactor carries IEC 60947-4, BS 775, and VDE 0110 group C ratings for insulation voltage. Rated impulse withstand voltage is 8 kV. For specific RoHS, REACH, or UL documentation, these are typically included in the Schneider Electric TeSys F technical file and can be provided with the order."},{"question":"What is the physical size of the CR1F630GZ7?","answer":"Dimensions are 12.2 in (309 mm) wide, 12.0 in (304 mm) high, and 10.04 in (255 mm) deep. Terminal connections use 60 x 5 mm bars with a tightening torque of 513.3 lbf·in (58 N·m)."},{"question":"What is the closest alternative if this part is unavailable?","answer":"Within the TeSys F range, the closest functional match would be another magnetic latching contactor with the same 630 A AC-4 rating and 127 V DC coil voltage. The CR1F series shares the same frame size and terminal arrangement, so a different coil voltage variant (e.g., 24 V DC or 48 V DC) would be the main parametric difference. For a non-latching equivalent, the LC1F630 series contactors offer the same main pole ratings but require continuous coil power."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/CR1F630GZ7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/CR1F630GZ7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}