{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"CR1F630L7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"CR1F630L7","canonicalUrl":"https://aoctrl.com/schneider/CR1F630L7","factsUrl":"https://aoctrl.com/api/mcp/products/CR1F630L7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TeSys F CR1F630L7, magnetic latching contactor, 3 poles, 630 A rated operational current, 1000 V AC, IP20 front face.","salesMarkdown":"The Schneider TeSys F CR1F630L7 is a 3-pole magnetic latching contactor rated for 630 A operational current at up to 1000 V AC. It's built for heavy motor and resistive load switching — the motor power ratings span 450 kW at 1000 V down to 200 kW at 220–230 V, with UL/CSA horsepower ratings up to 800 hp at 575–600 V. The magnetic latching mechanism holds the contacts without continuous coil power — the coil draws 2300 VA during the latching pulse, then drops to near-zero holding current. Unlatching also uses a 2300 VA pulse. This makes it suited for applications where sustained coil power is undesirable or where the contactor must stay closed through a control-voltage dropout. The 630 A rating is in AC-3 duty (motor switching), which is the real-world number for sizing. AC-1 (resistive) and AC-4 (plugging/reversing) are also listed — AC-4 typically derates the current, so confirm your load category. The rated breaking capacity is 6300 A at 220–440 V, dropping to 3200 A at 1000 V — that's the maximum fault current it can interrupt without damage. Short-time withstand current (Icw) is 5.05 kA for up to 10 seconds at 40 °C, tapering to 1.6 kA at 10 minutes. This matters for coordination with upstream protection — the contactor must survive until the fuse or breaker clears the fault. The associated fuse rating is 630 A aM or gG up to 1000 V. Mounts on a notched AM1-EC rail — that's a specific profile, not standard DIN. The dimensions are 309 mm wide, 304 mm high, and 255 mm deep. Terminal connections use busbars up to 60 x 5 mm, tightened to 58 N·m. IP20 on the front face only; the contactor is intended for enclosure mounting where the rear and sides are protected. Compliant with IEC 60947-4, VDE 0660, NF C 63-110, BS 5424, and JEM 1038. Rated insulation voltage 1000 V per IEC 60947-4 and IEC 60158-1, with impulse withstand 8 kV. Operating temperature range -15 to 70 °C, storage -60 to 80 °C. Altitude rating 3000 m without derating.","metaTitle":"Schneider TeSys F CR1F630L7 Magnetic Latching Contactor, 630","metaDescription":"Schneider Electric TeSys F CR1F630L7 magnetic latching contactor, 630 A rated operational current, 3 poles, 1000 V AC, IP20. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"255 mm","Range":"TeSys","Width":"309 mm","title":"CR1F630L7","Height":"304 mm","Standards":"VDE 0660 NF C 63-110 BS 5424 IEC 60947-4 JEM 1038","description":"Bistable contactor CR1-F - 3P - AC-3 440V 630 A - coil 208 V","Product name":"TeSys F","Motor power kW":"450 kW at 1000 V AC 50/60 Hz 450 kW at 690 V AC 50/60 Hz 400 kW at 500...660 V AC 50/60 Hz 400 kW at 440 V AC 50/60 Hz 375 kW at 415 V AC 50/60 Hz 335 kW at 380...400 V AC 50/60 Hz 200 kW at 220...230 V AC 50/60 Hz","Operating time":"40...80 ms latching 50...100 ms unlatching","lifecycle_stage":"current","Mounting support":"Notched AM1-EC rail","Average impedance":"0.12 mOhm - Ith 1000 A 50 Hz","Device short name":"CR1F","Poles description":"3P","Tightening torque":"58 N.m","Device application":"Control","Operating altitude":"3000 m without derating","Average Consumption":"11 VA AC 50...400 Hz unlatching 2300 VA AC 50...400 Hz latching 11 VA DC unlatching 2300 VA DC latching","Protective treatment":"TH","Utilisation category":"AC-3 AC-1 AC-4","Contactor application":"Resistive load Motor control","Mechanical durability":"1 Mcycles","Associated fuse rating":"630 A aM at 1000 A BS88 at 1000 A gG at <= 440 V for power circuit","Maximum operating rate":"120 cyc/h 40 °C","Connections - terminals":"Bars 2 cable(s) - busbar cross section: 60 x 5 mm","IP degree of protection":"IP20 front face conforming to IEC 60529","Rated breaking capacity":"3200 A at 1000 V 6300 A at 220...440 V for power circuit 5400 A at 500 V for power circuit 4600 A at 660/690 V for power circuit","Product or component type":"Magnetic latching contactor","motor power HP (UL / CSA)":"800 hp at 575...600 V AC 50/60 Hz for 3 phases motors 600 hp at 460...480 V AC 50/60 Hz for 3 phases motors 300 hp at 220...240 V AC 50/60 Hz for 3 phases motors 250 hp at 200...208 V AC 50/60 Hz for 3 phases motors","Irms rated making capacity":"6740 A for power circuit","Power dissipation per pole":"48 W AC-3 120 W AC-1","[Uc] control circuit voltage":"208 V AC 50...400 Hz 208 V DC standard","[Ui] rated insulation voltage":"1000 V conforming to IEC 60158-1 1000 V conforming to IEC 60947-4 1000 V conforming to BS 775 1500 V conforming to VDE 0110 group C","Control circuit voltage limits":"Latching: 0.85...1.1 Uc Unlatching: 0.85...1.1 Uc","Power Pole Contact Composition":"3 NO","[Ie] rated operational current":"630 A (at 1000 A (at 560 A (at <40 °C) at <= 440 V AC AC-4","[Ue] rated operational voltage":"1000 V AC 25...200 Hz","Ambient air temperature for storage":"-60...80 °C","Ambient air temperature for operation":"-15...70 °C","[Uimp] rated impulse withstand voltage":"8 kV","[Icw] rated short-time withstand current":"5.05 kA 40 °C - 1 s 5.05 kA 40 °C - 5 s 5.05 kA 40 °C - 10 s 4400 A 40 °C - 30 s 3400 A 40 °C - 1 min 2200 A 40 °C - 3 min 1600 A 40 °C - 10 min","[Ith] conventional free air thermal current":"1000 A (at 40 °C) for power circuit"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/438d6df3401065858523333583fd1044.pdf","sourceUrl":"https://www.se.com/th/en/product/CR1F630L7/bistable-contactor-cr1f-3p-ac3-440v-630-a-coil-208-v/"},"ai":{"faq":[{"question":"What is the closest alternative to CR1F630L7 in the TeSys F range?","answer":"Within the TeSys F magnetic latching contactor family, the CR1F630L7 is the 630 A, 3-pole variant. Lower or higher current ratings exist in the same form factor (e.g., CR1F400L7 for 400 A, CR1F800L7 for 800 A), but these are different order codes with different terminal sizes and coil ratings — not pin-compatible substitutes."},{"question":"What compliance documentation is available for CR1F630L7?","answer":"The contactor is certified to IEC 60947-4, VDE 0660, NF C 63-110, BS 5424, and JEM 1038. RoHS and REACH compliance documentation is typically provided by Schneider Electric on request through the distributor channel."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/CR1F630L7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/CR1F630L7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}